No wireless Internet connection running Windows ME

Similar Questions

• Went from "Windows Media" to "Windows XP SP3". Now, I get "Error Message 871122" trying to get a wireless Internet connection.

  Here are the facts:

  1. to have access to the internet with a direct line to router Ethernet ONLY, but no wireless connection.
  2. verified Harware for "Intel (r) PRO/Wireless 2915ABG Net" - WORKS FINE.
  3 drivers for the cards above, have most recent downloads - WORKS FINE.
  4 activated the 'USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS' button on the tab 'network connections'.

  In fact... impossible to find the above until that earlier. What happened immediately, is that I no longer get the "ERROR MESSAGE to SEE the ARTICLE ID: 871122" message. And instead, I could FIND my network. He finally has shown Up! However...

  Now, I clicked on my network and click 'CONNECT' and his request now a WEP key to be entered twice.

  So, I just need to get this 'key' to my Service provider and punch in, and it should work? Well, I'll try tomorrow.

  Thank you.

  So I read the ID: 871122 Microsoft Article. But I can't always have to figure if I need some sort of 'Internet '.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Cannot connect iphone or android smartphone residential wireless. PC running windows 7.

  Cannot connect iphone or android smartphone residential wireless. PC running windows 7. tried to use wep and wap without help. Use the belkin router. have a red symbol blinking on router during a connection attempt. No permission on the phone message.

  Hi MarvinCohen,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you want to establish a connection to homegroup between Windows 7 devices and iphone or Android.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  A homegroup is a group of computers on a home network that can share devices such as Printers and libraries (Documents, photos, music and video libraries). PCs must be running Windows 7, Windows 8, Windows RT or to participate in a homegroup.

  Using a homegroup allows for easier sharing, but if you want to connect the phone then unfortunately, I must inform you that you can not connect mobile phone or android device to a homegroup connection.

  See the article for more information.

  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with to join the homegroup, I'll be happy to help you. We, at tender Microsoft to excellence.

• I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

  I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

  I am running windows vista Home premium. Computer is Hp Pavilion dv6
  original title: try to set up an ad-hoc connection

  Hello

  Follow the suggestions from the link and check if it helps:

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Reference: Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• How to replace the missing wireless internet connection icon in the network connections?

  How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

  Hello

  The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
  http://support.Microsoft.com/kb/825826

• Set the sharing of internet connection using Windows XP & Windows 7 (two laptops). __

  We have two Toshiba laptops, using a Windows XP operating system and the other Windows 7 operating system.  We use a UM175 Verizon Wireless Modem so that in the United States (we are snowbirds) and an Internet Mobile Rogers stick to the Canada.  I have read the article on http://support.microsoft.com/kb/306126 and would like to know if this procedure would allow us to be able to connect two laptops to a modem for internet connection.
  Thank you for your help.

  Use this procedure to connect the modem to the Windows XP computer wirelessly and share the Internet connection with Windows 7 computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet connection down, windows 8, reset wireless network adapter

  I am running windows 8 on a computer laptop dv6 HP Envy and my internet connection keeps falling every few minutes.  This is due to the wireless network card and I have to reset the connection manually each time.  Even plugged into my modem, the connection drops.  I had my ISP reset the modem, tested and it works fine.  My connection is still down because of my network card.  Help, please.

  If you run the dism.exe / online/cleanup-image /restorehealth it may very well be able to fix the corrupted files. If necessary reruns sfc / scannow.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir.

  If you have one foot in the past, one foot in the future, you're pissing on today

• Abandonment of the wireless Internet connection when you use HP G62 PC with HDMI connector to a TV from Samsung LE40C580

  Although I have connected my laptop HP G62 to my Samsung LE40C580 TV via a HDMI 1 meter and everything worked OK. The wireless internet then falls after a few minutes. After removing the HDMI cable, internet reconnects. Could you please provide a solution? I have a wireless full power before and after the stall signal.

  Hello

  What version of the Windows operating system is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Internet Connection Troubleshooter and check if that helps.

  Follow the steps to run the Internet Connection Troubleshooter:

  Click the Start button, type Troubleshooting in the search box, and then click Troubleshooting. Under network and Internet, click connect to the Internet and run the troubleshooter.

  Method 2:

  Try to update the graphics driver and check if it helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Hope the information is useful.

• How to install the Microsoft Xbox 360 game wireless laptop controller running Windows 7 as a ' instead of "unspecified '?" game controller

  Downloaded Microsoft Xbox 360 Wireless game controller for laptop running Windows 7.  The driver does not read like a game controller but appears as not specified.  How can I get the hardware to read like a game controller?

  How have you connected it to the computer?  If you are using the play & Charge kit, it won't work because it connects only makes it to the battery.  The controller always connect wireless so you will need an Xbox 360 Wireless Gaming receiver for Windows. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• ISATAP adapt #2 Error Code 10 CAN t start, so no wireless internet connection

  To start my computer this morning seeing wireless not turn on, and I have no internet connectivity wireless.  When I looked at the hardware Manager, there is a yellow triangle next to ISATAP #2 card.  When I clicked on this one message gave me the error code 10 and said that he could not start.  Have reinstalled and checked the driver without result, have executed a microsoft fix it program with no joy.  I haven't changed anything except I just set up a new battery.  How can I set this yellow triangle and get my wireless to work?

  Am running Vista, on a computer HP compaq laptop.

  Hello

  Even if the router is working on her he might still have a problem with your. Remove the power
  for the modem, the router, and your computer, and then turn on then again in that order. A hard
  reset as that will help eliminate a cause, although not completely.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Slow internet connection in Windows 7

  Original title: Twelvebore1

  Internet problems.

  Vpcl12M1E Sony PC running Windows 7.

  It functions fine but Internet at a snails pace. Many worked for five years and then the trouble started recently.

  Reset the modem and ran Norton and Malwarebytes, no problem. An iPhone and two iPads can connect to between 19 and 20 Mbs to the same wireless network, the PC can barely do 1Mbs. takes about 30/40 seconds to load a page from Google.

  In desperation I used the recovery disc to clean the disk and start over. Despite this I still have the same problem. It makes no difference between cable and wireless - pace of snails still speed

  Could still be a virus?

  My network card may be faulty?

  Please help my old gray head is losing his hair.

  Hi Peter,.

  Thank you for responding.

  As the troubleshooter for troubleshooting Internet connection problems might not solve your problem, this problem could be due to corrupted or outdated drivers network card. Try it below and check if it helps.

  I suggest you try the troubleshooting steps mentioned in the Microsoft article below and check out them.

  Reference: why is my Internet connection so slow?

  It will be useful. Please perform the above methods and update the status of this issue, we will be happy to help you.

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.