Noise during PC startup

Similar Questions

• Satellite P305D - different error during the startup sequence

  Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

  I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

  Any help would be appreciated.

  Terry

  Hello

  Can you please post what errors you get during the boot process?

  In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
  Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

  In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

• Explosion of white noise during playback

  I have now updated my iMac9, 1 RAM 8 GB (I am currently using OS X 10.11.2 El Capitan) and although things work well and much faster loading, I am now getting boring, random bursts of white noise during playback of music, either from videos on the web, Spotify, same iTunes. Has not happened before with the precedent of the RAM. Can the new RAM will actually be the cause?

  "Can the new RAM will actually be the cause?

  Not that I've never heard of. What you play audio via? The internal speakers, headphones, etc. ?

• NTOSKRNL.exe problem during the startup of windows xp on a dv5000i Pavilion

  Hi all!

  I have a Pavillion dv5000i

  I get an error message mentioning a NTOSKRNL. Order EXE corrupt during the startup of windows xp.

  I can't boot from a disc XP system either.

  Could this be a HW problem?

  I've extracted the original HD and put it in a usb interface

  I can read it without problem with another PC (so the HD should not be the problem)

  Thank you all

  Kind regards

  Gino

  NTOSKRNL is a software, and it must be there for the machine to start.  The recovery discs should fix this.

• The custom during the Startup logo display

  I'm trying to get a custom logo to display during the startup of a laptop HP Elitebook 450 G1. Can someone send me instructions or link to a utility to do this. Any help will be making thank you.

  ECE

  Your manual

  http://h10032.www1.HP.com/CTG/manual/c03394575.PDF

  F10 Bios Configuration Sytem logo personalized

   

• white noise during video calls

  Whenever I do a video via MSN or Skype call after the 1st minute, I get louder white noise explosion yet if I keep talking about my connection to the other end can hear me clearly and has no such interference, but the noise is unbearable so I am unable to continue the video call

  Please help because this is my only connection to my mother in Malaysia

  Hi, KongConnie,

  This issue needs to be validated in support of Skype or MSN Support

  https://support.Skype.com/en/category/tech

  http://community.Skype.com/T5/call-quality/roaring-noise-during-some-calls/m-p/81116/highlight/true#M730

  Windows Live - MSN Messenger Support

  http://windowslivehelp.com/product.aspx?ProductID=2

  The title may be concerning the establishment of a video call, but the steps may also resolve audio issues. Please let us know what happens.
  http://windowslivehelp.com/solution.aspx?SolutionID=2f68d6f8-9049-4b14-b2fc-f191f489c938

• I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list.

  I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?

  Hello

  Yes, it can be in hidden files that may cause by the virus.

  I also suggest you to see link and check.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• Noise during playback of MP3 EM326g

  I have an EM326g phone with a built-in mp3 player and I like the feature. I use it every day at work. I have a SanDisk 2 GB card installed in the phone memory. The problem is that, during playback, I get a "squeaking" intermittent noise that might happen three or four times in rapid succession at the stop. This happens randomly, maybe every 20-30 minutes or more. It never happens on a particular song, so I ruled out a problem with the MP3 itself. I tried two different SanDisk 2 GB cards and both have the same problem. It's pretty boring and the only downside to another great phone! Any suggestions to fix this? Thank you!

  Problem solved!

  The noise was caused by the comments of my desktop, so I put the phone on airplane Mode when you use the mp3 playback capability and did not have a problem, because I discovered!

• Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

  When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

  I also have this error report for blue screen event.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1
  BCP1: 85212696
  BCP2: 00000000
  BCP3: 0000FFFE
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini020712-01.dmp
  C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
  C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================================================

  BCCode: 01 0x00000001

  The most common cause of this Bug_Check is drivers then use the methods in the next message
  updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
  with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
  still in force. (See how to update the drivers and run driver verifier in the next message).

  --------------------------------------------------------------------------------------------------------------

  Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  LeAPC_INDEX_MISMATCHErreur settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The address of the system (system call) function or a worker routine.
  2	The value of the field ApcStateIndex of the current thread.
  3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
  4	Type (system call 0-, 1 - routine worker) of the call.

  Cause

  The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

  BCCode: 01 0x00000001<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

  ====================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen during the startup or shutdown

  I have windows vista home premium.sometimes during startup or during shutdown, a blue screen appears for a very short time and the restarts.from of the computer, what I have seen during this short period his written dumping physical memory, etc as something is written on my BIOS.do I need to update my BIOS version or is there any other problem? Please answer soon.thanks.

  You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• Can not turn on WiFi if it isn't already during computer startup laptop HP Pavilion G6

  1. number and product name
  HP Pavilian G6-1336SA

  2 operating system installed (if applicable)
  Windows 7 64 bit

  Usually, my Wifi works fine and the blue light comes on during startup and I can switch it switch using the F12 key.

  However, if my system starts the color is orange when WiFi is off, he's not the F12 key and activate the WiFi does not appear in the configuration options of Windows mobility.

  This is a problem that keeps coming back from time to time and is quite frustrating because I often have to reboot the system to operate.

  Any help would be greatly appreciated. Thank you

  Ensure that the BIOS is up to date here and the WiFi pilot is the most recent. He could have used a different wifi card installed during the manufacturing process, you may need to try each by using the most recent driver version. It could be a default WiFi card. If the option to turn on all together it is missing, which usually indicates a faulty WiFi card. Youl could also try reinstalling the wireless card listed on page 52 of this guide.

• Cisco Aironet 1262N stuck during the startup process

  I'm banging my head against the wall, trying to figure out why my AIR-AP1262N-A-K9 will start all the way. He'll get all the way to initiate interfaces and stop. I can never get to control the CLI. This is my first time with a cisco ap but everything I read it very easy sewing.

  This unit from what I understand will work on its own with no controller. Therefore, it is called a "stand-alone" model Yet he seems to be looking for something to complete during the boot. Below the out put for starting. The last line is where it stops.

  If anyone can help me I would be very happy.

  WRDTR, CLKTR r: 0x8200083f 0x40000000
  r RQDC, RFDC: 0 x 80000033 0 x 00000212

  using the values from the eeprom

  WRDTR, CLKTR: 0X8200083F 0X40000000
  RQDC, RFDC: 0 X 80000033 0 X 00000212

  MCNG ddr static values of the eeprom series
  init done DDR

  IOS Bootloader - start System.
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0X8200083F, 0X40000000
  RQDC, RFDC: 0 X 80000033, 0 X 00000212

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIE 64-bit devices
  PCIEx: initialization done
  flashfs [0]: 147 files, 7 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 31739904
  flashfs [0]: bytes used: 6435328
  flashfs [0]: available bytes: 25304576
  flashfs [0]: flashfs fsck took 9 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.
  Error: Speed RGMII

  The system has encountered an error during initialization
  the Ethernet port.
  The system is ignoring the error and continue to start.
  If you stop the system startup process, what follows
  orders will be re - initialize Ethernet, TFTP and finishing
  loading the operating system software:

  ether_init
  tftp_init
  boot

  for 22 seconds
  process_config_recovery: set the IP address and the default config 10.0.0.1
  process_config_recovery: image recovery

  PA:
  WRDTR, CLKTR r: 0x8200083f 0x40000000
  r RQDC, RFDC: 0 x 80000033 0 x 00000212

  using the values from the eeprom

  WRDTR, CLKTR: 0X8200083F 0X40000000
  RQDC, RFDC: 0 X 80000033 0 X 00000212

  MCNG ddr static values of the eeprom series
  init done DDR

  Normal running Memtest...
  Past.
  IOS Bootloader - start System.
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0X8200083F, 0X40000000
  RQDC, RFDC: 0 X 80000033, 0 X 00000212

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIE 64-bit devices
  PCIEx: initialization done
  flashfs [0]: 147 files, 7 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 31739904
  flashfs [0]: bytes used: 6435328
  flashfs [0]: available bytes: 25304576
  flashfs [0]: flashfs fsck took 9 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.
  Error: Speed RGMII

  The system has encountered an error during initialization
  the Ethernet port.
  The system is ignoring the error and continue to start.
  If you stop the system startup process, what follows
  orders will be re - initialize Ethernet, TFTP and finishing
  loading the operating system software:

  ether_init
  tftp_init
  boot

  "Loading Flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...### ".
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################################
  ###############################################################################

  File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed one
  ND installed, point of entry: 0x4000
  execution of...
  ENET stopped

  Legend restricted rights

  Use, duplication, or disclosure by the Government is
  subject to such restrictions as set out in paragraph
  (c) Commercial - limited computer software
  The rights to FAR clause 52.227 - 19 and subparagraph s
  (c) (1) (ii) rights to technical and computer data
  Clause of DFARS 252.227 - 7013 section software.

  Cisco Systems, Inc.
  170 West Tasman Drive
  San Jose, California 95134-1706

  Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
  SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2011 by Cisco Systems, Inc.
  Updated Friday, August 11, 11 02:07 by prod_rel_team

  Proceed with the initialization of the system

  Proceeding to unmask interrupts
  Initialization of flashfs...
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......

  flashfs [1]: 147 files, 7 folders
  flashfs [1]: 0 orphaned files, orphaned directories 0
  flashfs [1]: Total number of bytes: 31481856
  flashfs [1]: bytes used: 6435328
  flashfs [1]: available bytes: 25046528
  flashfs [1]: flashfs fsck took 7 seconds.
  flashfs [1]: initialization complete.
  flashfs [2]: 0 files, directories 1
  flashfs [2]: 0 orphaned files, orphaned directories 0
  flashfs [2]: Total number of bytes: 11999232
  flashfs [2]: used bytes: 1024
  flashfs [2]: available bytes: 11998208
  flashfs [2]: fsck flashfs took 1 seconds.
  flashfs [2]: initialization complete... done Initializing flashfs.

  Radio0 presents 8364B 8000 B8020000 0 B8030000 10
  Present Radio1 8364B 8000 B0020000 0 B0030000 C
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.

  This product contains cryptographic features and is under the United States
  States and local laws governing the import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third party approval to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. laws and local countries. By using this product you
  agree to comply with the regulations and laws in force. If you are unable
  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at
  [email protected] / * /.

  processor of Cisco AIR-AP1262N-A-K9 (PowerPC460exr) (revision B0) with 81910 K/4
  9152K bytes of memory.
  Card processor ID FTX1716E2DN
  PowerPC460exr CPU 666 Mhz, the 0x18A8 revision number
  Last reset of tension
  1 gigabit Ethernet interface
  2 802.11 radios

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: 7 c: AD:74:93:36:BA
  Part number: 73-12175-06
  Kit numbered PCA: 800-32268-06
  Revision number of PCA: B0
  Serial number of PCB: FOC17106662
  Top Assembly part number: 800-33866-02
  Top of page the Assembly serial number: FTX1716E2DN
  Top of page revision number: A0
  Product/model number: AIR-AP1262N-A-K9

  Press RETURN to get started!

  * 00:00:09.481 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS t auto
  is spent
  * 00:00:09.490 Mar 1: * CRASH_LOG = YES

  * 00:00:09.490 Mar 1: PCIE 64-bit devices
  * 1 Mar 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
  n level 4
  * 1 Mar 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
  n level 4
  * 00:00:12.966 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
  test successful Dot11Radio interface 0
  * 00:00:15.649 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
  test successful 1Base Dot11Radio interface Ethernet MAC address: 7 c: AD:74:93:36:
  BA

  * 00:00:56.377 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
  up to
  up to
  ernet0, changed state down
  * 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed state of a
  dministratively down
  * 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state of a
  dministratively down
  * 00:11:00.003 Mar 1: % CDP_PD-4-POWER_OK: full power - AC_ADAPTOR inline power s
  ource
  * 00:11:00.012 Mar 1: % SYS-5-RESTART: System restarted.
  Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
  SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2011 by Cisco Systems, Inc.
  Updated Friday, August 11, 11 02:07 by prod_rel_team
  * 00:11:00.012 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap undergoes a c
  old beginning
  * 00:11:00.994 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
  State of GED until
  * 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
  1, changed down state
  * 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
  0, changed down state
  * 00:11:11.956 Mar 1: % LINK-3-UPDOWN: Interface BVI1, changed State to down
  * 00:11:12.957 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
  State of GOL downstairs

  What are your settings of the nec console?

  You must be 9600, none, 8, 1 and flow controll set off to be able to interact with the CLI

  HTH,
  Steve

  ------------------------------------------------------------------------------------------------
  Please don't forget to rate helpful messages and mark the questions answers

• M90 display garbage during the startup video

  Hello

  My M90 has recently started with vertical display in green dots and green blocks during startup. First of all, this problem occurred while I was repairing XP Pro.

  I managed to complete a repair XP and for a while, everything was fine but the next day I had the rear lines and I can only boot mode safe now. In normal mode, the screen is black.

  I have about 20 GB free on a 60 GB drive.

  
  

• Satellite U - crashes during windows startup and restore cannot fix

  Most of the time, but not whenever the laptop hangs when starting windows.
  I get a blue screen, a dump file is created and then it restarts and gives me the ability to start windows normally or by using windows recovery. The windows recovery can not solve the problem.

  When I select the option to open windows normally everything works fine without any problems.

  If I restart the laptop, it will never block.
  The problem happens about 90% of the time when he walks.

  The problem started shortly after the purchase of the laptop in October.
  Initially, it came with Windows Vista and I was wondering if the problem was with Vista so steeple I've upgraded to Windows 7, but it always freezes on most start-ups. Otherwise, the laptop works very well and I'm happy with it.

  I suspect that the problem might be with Realtek, but pilots seem to be up to date. My internet security is trend micro.

  I was wondering if it might be a hardware problem, when this happens on Vista and windows 7.

  Someone has any ideas on what could be causing the laptop to crash at startup?

  Hello

  To be honest, if this problem occurs on the version of Vista and Windows 7 too that sounds like a hardware problem and it s time for an authorized service provider. Technicians can check your laptop fix it. It of fairly new, so I guess that it s still under warranty and the repair is free.

  Here, you can get the closest authorized service provider:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Goodbye :)

• Background noise during recording on Equium A100-027

  My Audio cd plays very well and the sound quality is good.
  However, on the extraction of tracks and playing in Media Player, there is a background noise "to be carried".
  The same noise is generated when you use the keyboard with MacOS E - MU Proteus X 2 software.

  Is there an Audio driver problem when recording?
  Someone had a similar problem?
  I posted this before you try the new drivers out of this site: I'll report if it solves the problem
  Thank you

  Happy to know