Noise of the camera

Similar Questions

• Camileo H20 - strange noise throughout the video

  Hello.

  I today received delivery of my first camcorder, which as the title suggests, is a Toshiba Camileo H20.

  Overall, I am impressed with this little camera, but there is a problem that concerns me. After reviewing a video of test, I created to see what the quality was as I noticed a strange sound throughout the video. I struggle to describe, it's a bit like static/interference. The thing is that I already have some tests to find out what could be the cause of it, and I found nothing. Again, the camera records audio as usual, but this static/interference is there with her.

  At first I thought it's maybe because I'm close to electronic devices such as a TV and a PC, so I went in my new garden and filmed there, but noise persists. Then I covered the microphone to see if it makes a difference, but it didn't. I also tried different video modes, leaving the camera on a desk to record walking around a room and then I even resorted to transform a sound recording off altogether. The strange thing is that the camera has always been that noise when I play the video on my computer even if no sound is registered.

  I have a slight suspicion thinking he made this noise if the camera is moved. But if I remember correctly it makes the same noise when it was not moved on the desktop.

  Someone at - it ideas on how to solve this problem? Preferably not by reference. I would like to, but I don't have time because I'm going on vacation next week and I want the camera to do this.

  Thanks in advance.

  I'm downloading two videos on YouTube in VGA mode and 720 p. Once they are uploaded I will edit this post with the links.

  HD:
  http://www.YouTube.com/watch?v=EqxzQi5G0Sc

  VGA:
  http://www.YouTube.com/watch?v=9fMjfIqK09Q

  Quality cannot be correct because they have just the end of the download.

  Hello

  I have no idea why this strange sound appears, but I found in the manual of the user an interesting point.
  You can disable and enable the sound of keyboard and operating noise.
  In Submenue setting, press the button to go to the audio menu. Use the left/right keys to select ON or OFF. Press the menu button OK to validate the settings.

  The other point is that you said that this noise appears when you play the video on your computer. Maybe it's just a s codec problem.
  I remember that the sound on my movies created with the HD cam is really strange questions wore on the package of codec missing on my laptop. In addition, the player didn't manage HD sound.
  I chose the stereo settings and then the sound was ok

  I'm not very well if this might be a reason in your case but it s m worth a try
  Check the sound configurations and try to install some codec packs too

• 8 casual Windows no noise problems. The camera is used by another application.

  Hello
  I had sound problems with the speakers on an HP Ultrabook running Windows 8. Sometimes the laptop speakers stop working. When this happens, I go to control panel > sound, speakers (one set to select), select Configuration and Test. After selecting the Test, I get the message device in use. The camera is used by another application. Please close all units are audio playback on this device, and then try again. I went to the properties for the speakers, the Advanced tab and unchecked option "allow applications to take exclusive control of this device." I also used the term sndvol to try to determine the application, but it only shows the device: speakers / HP and Applications: System sounds.

  The only way I could get the speakers to work is to restart or turn off and turn on the pilot for the IDT High Definition Audio CODEC. Does anyone know how to determine the application causing the problem? Thanks in advance for your help.

  Gary

  On the forum of the community of HP HP technician found that uninstalling Microsoft update KB2962407 should solve the problem.  This update is a patch that says "shortened battery life when an inactive audio device is not turned off on a computer running Windows.  I installed this update on June 19.  I have no updates installed July, so uninstall updates July cannot solve the problem.

• Camileo P100 screen is black, but the noise from the unit

  Hi all
  I just bought a Camileo P100 and fully charged.

  Although it seems to work when you take a picture the camera 'clicks', the video recording the LED flashes, the touch screen is black and I don't see anything.

  When you touch the screen, it doesn't seem to be working (there are noises from the unit when I touch the screen), but the screen is black.

  Can anyone help?

  Thank you
  Mark

  Hello

  Try, press and hold the button On / Off a few seconds.
  Also check if the opening of the camcorder is open

  But it looks a bit like a hardware problem.

• The camera shutter sound blackBerry smartphones

  How did you calm the noise the shutter when you take a picture with the camera on your phone? (I have a bold blackberry: 9700)

  There are several third-party applications for BlackBerry that will cut your sound camera shutter.

  CameraTogo

  'Cuckoo '.

  QuickLaunch

  are just a few.

• Obvious, ugly, black as pepper 'noise' in the development of image?

  

  

  My question is hard to explain other than looking at the photo above here and I was wondering, 'is this normal? Is it because of my picture or Lightroom? »

  Sometimes, when I'm editing a darker photo in the develop module, LR seems to deal with noise on the pictures differently resulting in (sometimes) really ugly black pepper like noise or patches of black color which kind of ruins the picture. If it's just my camera or photo or how I'm editing very well - the picture, I accept a bad photo and please let me know what I'm doing wrong here. But if LR treats the photo so that it focuses on the noise in the photos, I want to know how to not make again. Any help is appreciated! Thank you!

  If you blow things up to 3:1 and you have a lot of sharpness, this could easily happen.

  If you temporarily turn off sharpening and view the image at 1:1, how is it?

  Moreover, why you look at photo 3:1 anyway?

• How to follow the camera with a quick movement (photographed close)

  the shot is close green screen and a fast movement and camera cut markers.

  any ideas how to solve this problem? I knew I may had to shoot again, but its impossible because the actors are not here anymore. If I have to fix it.

  No matter what plugin recommend or technique?

  This photo will not follow with any software that I know.

  

  There are a host of problems that should give you a valuable lesson. First of all, track automatically to set unique geometry that is big enough to get at least 100 pixels of detail of. This means at least 10 X 10 pixels. There is nothing in the background of your ball in any image, with the exception of a few markers that come close to bing big enough to ensure the monitoring of follow-up. As the follow up to the camera, you will need to establish at least 2 planes that are far enough to calculate changes in perspective and parallax. Your photo does contain yet one of the elements required to keep track of the camera.

  The only plans in your shooting are net in the background and the ned in the objective. Blur of movement and wrinkles in these two plans you provide nothing to track. You also zoom out of frame 7 frame 12. NEVER EVER ZOOM if you intend to replace a background or a camera do follow. Above all, do NOT autofocus. It is almost impossible for camera tracking software to calculate a zoom of the camera when the zoom blur. A glance quick pan and zoom is almost impossible to keep in the best of cases.

  It will also be impossible to fire a clean key because the net in the background is subject to a lot of black lines and white NET in the goal gets completely blurred out in a large part of the shooting.

  Just a bit of pre-production planning and some storyboards would have saved the day. You have created a situation where your only option is to roto your actor and the target frame, and then re-create the net and the background by hand. What should have been a half hour in post will turn into a few days, unless redraw you on it together to be something more stylized way. There is so much noise in the shooting of nets and the motion blur that RotoBrush will not follow anything other than a single image. You're going to have to cut your player by hand and rebuild the background and adjust the position, rotation and scale by hand one frame at a time. Do not count on making money on this one. There is not enough details around this one even to stabilize the shot to make it easier to roto. I tried.

  If it were my project, I would leave this one out or roto actor, throw in a bunch of lighting effects and completely forget reality to put this photo in a chart instead of a film.

  

• How is there is some noise in the library module, while there is none in the develop module?

  Straight, simple like this:

  I shoot with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  I airbrushed a picture and I pushed some limitations while using the tool brush on some sections of the image.

  As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo.

  How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  What to trust? How can we work with divergence like that?

  If anyone noticed something similar, I would really like your opinion on this.

  > I'm shooting with a 5 d MARK II. Complete captor. No noise even possibel to ISO high.

  You have been deceived by the marketing. All cameras, even a 5DmkII a noise at each ISO setting. Most of the noise from digital in modern cameras capture is caused by photon counting statistics (i.e. photographed fish noise or noise) and in small part by the noise of the amplifier. This means that any pixel noise is practically equal to the square root of the number of photons counted by the pixel. "Canna change the laws of physics Cap ' n."

  > I've airbrushed image and I pushed some limitations while using the tool brush on some sections of the image. As I watch in the DEVELOP module, I see no noise at all. As soon as I open it in the LIBRARY module, I see the noise on this specific section of the photo. How is it? Will there be a compression of the image between the DEVELOPMENT and the LIBRARY module?

  Development module working on a small subset of the raw data for its display, especially when zoomed out to go up or fill. This is to ensure that cursors are sensitive and you don't have to wait for a few seconds each time you touch a slider. You can only trust the preview to establish in what respect the sharpness and noise when zoomed to 1:1 or higher because of this and this means you must be able to optimize the sharpness and noise while the zoom 1:1 reduction. This is necessary in all cases that capture sharpening and noise reduction work at the pixel level. In the library, the preview is a JPEG, pronounced on the raw file using full raw. Also note that if you brush positive clarity, one tends to amplify really no noise in the image, so, be careful and check regularly at 1:1.

  > What to trust? How can we work with divergence like that?

  1:1 Preview to the point or the glimpse of the library if you are interested in the features of sharpness and noise.

  > If anyone noticed something similar, I would really like your opinion on this.

  You are not the first to see it for sure. Usually, it doesn't matter except when you push your images really hard.

• Reduce the noise from the projector

  I'm new to first items 10 and plan on some of my first projects making the transfer of some sound Super 8 films on DVD and the web. I have the film loaded into Premiere Elements but I notice that some have noise from the projector in the background. I have them done with microphone of the camera, pick up the sound from the speaker projector since I have no way to save only the sound alone.

  I did have a lot of luck with the help of audio effects to reduce noise. So I was wondering if anyone knows what I have to use filters. I want to reduce or eliminate (no chance of this, I know) the projector noise so that the voice can be heard better. Thanks to all who have advice!

  I have books of Steve Grisetti ordered but I would like to do something on this project in the meantime. I do not understand how the audio effects change the audio, but I hope the books will give me a full understanding of them.

  The removal of the 'noise' of an Audio file is usually difficult, hard work and often not that good. Yet, this ARTICLE goes into detail. Unfortunately, with noise audio, there is no "miracle cure".

  In my case, my projector Eumig Dual-8 has a one line (DIN plug) and I just feed on my recorder or camera and in the latter case, select Line In, only to turn off the microphone.

  Good luck

  Hunt

• Bad noise in the shadows in ACR

  Hi guys,.

  Here's the problem I have.

  Until last week for conversions of RAW format, I was working with Digital Photo Professional of Canon (the software supplied with the camera). I have Canon 5 d. It was read RAW perfectly, giving a silent picture.

  Recently, I adopted all-Adobe workflow, so I use Bridge to visualization, cab for conversion and PS for editing. But the problem is the next. Bridge and after in ACR on perfectly lit photo where I have a dark tones and shadows (those not underexposed, simply correct dark tones and shadows) in ACR and bridge preview I see bad noise colorful, something you would see when artificially increase the brightness in the shadows. This is the default setting, without changing anything in ACR (or bridge) in a blink of an eye, it is not visible, but it is very sensitive when compared side-by-side with Canon Digital Photo Professional insight and overview ACR or bridge. And its also noticeable when you view the shot at 100% size. Of course everything I see in ACR is transferred to Photoshop. Well most of the time I can get rid of this noise in the PS, but it is still disturbing because I've not known just as with Digital Photo Professional.

  Could you guys please help me understand source of this noise, and how to get rid of. Thank you in advance.

  My monitor is HP 2445, calibrated. Software Photoshop and Bridge CS4.

  Pls give it a try with a lot less black. The shot is very clean, it works even with blacks = 0, but try it with 1 or 2. The default in ACR, 5, is brainless.

  Because of this change, you can adjust the brightness and contrast to your liking.

  Another question: the shot could be exposed 1 2/3 EV higher without clipping (but it wasn't underexposed in the sense that it would have caused excessive noise). I mention this only because you may not know, that ACR adds 0.25 EV "exposure" adjustment shots 5 d without displaying on the slider, thus creating the impression that the shot was exposed more high because it is in reality. (The setting is 0, 750 EV with 50 ISO, but never use with raw data, because it is simply overexposed ISO 100.)

  Gabor

• The camera on my iPhone 6s is suddenly in a folder

  MY camera has moved into a folder called photography and I can't remove it.

  Tap and hold the icon and when your apps start jiggling, press on and drag the camera out of the folder app and move it where you want.

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB

• iPhone 7 more sudden that it recharges when you use the camera

  My iPhone more brand-new 7A they weird sudden reboots when I start the camera application. I hear the camera application, point, shoot the picture and everything becomes black and the phone made a quick restart. This means that it takes only about 3 or 4 seconds for the phone to come back alive and operational (I have to return my password instead of use the fingerprint).

  This happens too often, but not always. It can happen at the launch of the application of the camera itself or when you try to use the camera via Whatsapp or Facebook Messenger for example.

  Is this a known bug or should I consider taking the phone...

  You can try to reset your device. Press and hold On / Off and the Volume key down until you see the Apple logo.

• Send to compressor: how to choose the camera

  Hello

  I apologize if this is a really stupid question, I'm quite new to Motion 5.

  If I am not mistaken, with send to compressor, using the multi-passages option, and other compressor optimized parameters will result in the export of better quality, if this is true, it's the method that I would use for my final exports.  (If I'm wrong, please correct me and let me know which will give the best final ProRes 4444 60 fps 1080 p export - I then import them using FCPX and do a little cut etc, then exporting to h.264 final 60 fps 1080 p).

  Anyway, to my question, how choose them which camera I want to export?

  I choose 'Export using compressor settings,' and then I give myself the opportunity to choose which camera, but I no longer like the options of compressor, where I can choose to use multi-pass and all other settings.

  I tried selecting the camera that I want to export, and then "Send to compressor", but that does not work, it does not use the camera, I chose.  I have a total of eight cameras, so to choose which device I export is quite important for this odd project.

  The answer could be made obvious, once again, I apologize if this is a really stupid question.

  Thanks in advance for any thoughts.

  (Motion 5, compressor 4, El Capitan)

  If you use 'Export using compressor settings' this essentially load presets created in compressor without going into the application, so it has minimal options for adjustment.  What you want to do, you should be able to create a preset in compressor with the settings you need.  Then moving when you use "Compressor to help export settings" select your preset and in the Render tab, there is the section of 3D rendering, you can select the camera you want to copy.  By default, it should be 'Active Caméra', but you can select your other cameras as well.

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will