Noisy liquid cooling system

I have a HP Clubhouse Phoenix with liquid cooling. The fan has become noisy. After 2 hours with assistance today to find the noise, we found whence he came. They gave me a part number 657398-004 or 657398-003. This part is not in stock, and they had no idea when it would be available. Google search has a share of provider, but this game is abandoned. My question is has anyone know of a system that I could use to replace that defective compatible liquid cooling?

Hello 731coach,

I don't have a replacement for this part number, but if the fan itself became noisy, have you considered oiling it?

Most of the fans can be lubricated. Sewing machine oil works very well. Away from stuff like WD-40.

How to lubricate a noisy fan.

Again, don't know if that's what you want to say as being the problem, but if yes, give the oil trick to try. Google fixing noisy fans computer to view the videos.

It will be useful.

Tags: HP Desktops

Similar Questions

  • [Power Mac G5] Type of liquid cooling system?

    Y at - it anyway how to determine type of LCS just by looking at the case?

    We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

    But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

    So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

    Thank you...

    Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

    The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

  • Cooling system Alienware Aurora R4

    Due to several accidents on my R4 Aurora, I google after the reason because these crashes, and I read that a problem could not work liquid cooling system. I live in Zurich in Switzerland, where I can buy a new cooling system?

    eBay Europe... examples of US stock cooler ... 'none' wide wide 120x25mm or 120x38mm should be ok... Google images Corsair H80i

    replace the stock R4 Alienware Aurora CPU cooling pump

    R4 (need advice)

    R4 premium 38mm large radiator manufacturer 01YGW (google/bing/eBay or Dell Sales)

    The thermal high quality grease if your cooler is delivered without any substantive multi-orientation

  • replacement fan on the cooling system liquid on HPE h9 - 1215t Office in Phoenix

    Speak with technical support, they identified the fan on my liquid cooling on my new computer does not work correctly.  It does not start by itself, but if I give it move a bit, he starts and is still spinning.

    I really want to send it and leave a computer for a few weeks. I can easily replace the fan myself - but I can't find a replacement part or a fan number anywhere.

    Does anyone know the numbers of replacement parts and where to buy one?

    Thank you

    Product number: D7W28AV

    • • Windows 7 Home Premium 64
    • • 3rd generation Intel® Core™ processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
    • • Liquid cooling solution
    • • 2 GB Nvidia GeForce GT630 [DVI, HDMI, and VGA via adapter]
    • • 16GB DDR3 1333 MHz SDRAM [4 DIMMS]
    • • 256GB Solid State Drive
    • • 1 TB 7200 RPM SATA hard drive
    • • Microsoft Office Trial
    • • $20 OFF Norton Internet Security™ 2013 - 36 months
    • • Blu - ray player & SuperMulti DVD burner
    • • DVD SuperMulti burner
    • • 15-in-1 reader cards, 4 x USB 2.0 (front), 2 x USB 3.0 (top)

    So I bought a fan used on ebay-

    So that was the same part number, it not was not the same exact fan (no lights, no plastic), but it has perfectly aligned, uses less amps and worked without problems.

    My original fan: PVA092g12h-p28-ee

    Fan I bought-

    PVA092g12h no options

  • HP Pavilion Phoenix h9-11704 cooling system improvement

    Hi all.  I have a HP Pavilion Phoenix h9-11704 Office cooling system liquid does not and I can't find the spare parts for it.  So I would like to turn the cooling system to a standard cooling system, but have no idea what parts I need reference numbers.  Does anyone have any suggestions?

    Thank you.

    What

    Well I finally found something that seems to work.  The installation was quite easy and the device fits well in my Tower.  I run the PC for a few days to see if I have problems, so I'll post back then.

    The point that I have installed:

    Noctua NH - U9S Premium quality quiet cooler for Intel CPU

    https://www.Amazon.com/GP/product/B00TBHYYFK/ref=oh_aui_detailpage_o00_s00?ie=UTF8 & PSC = 1

    There are several kits installation provided with the device.

    What

  • HP Z840 workstation: for Z840 liquid cooling?

    I currently have a Z800 WS dual Xeon CPU and coolant.  I am scheduled for a new WS and watched the Z840 but I don't see an option of liquid cooling. I run the structural analysis software that allows me to analyze a load case by heart so more cores means a faster flow.

    I was told that the faster clock speed and multiple real cores will be the best, so what will work better CPU and RAM?

    Another question, is that HP has a Mobo that supports several consumers i7 cpu popular with a lot of ram? I don't know if the Z840 WS and processor Xeon is the best bet.  Are there other options?

    There is no option of liquid cooling for z840 systems. With current processors, we do not believe that the system requires liquid colling option. HP get a kit rather than high-performance cooling liquid cooling in air. I don't know when, but not a long time.

    The following quicspecs list the supported processors and the memory modules. This system supports INTEL® XEON® E5 and DDR4 - 2133 ECC Registered / RAM load reduced (LR).

    http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04400043.PDF

    For performance, it is not a simple question. It depends on your application such as processor, memory intensive, drive-training or other resource intensive applications.

  • Satellite L655D shows warning of the cooling system

    At this pop up on my laptop
    Application popup: WARNING: WARNING: a problem with the cooling system has been detected.
    Please turn off the power immediately and return it for service.

    had a few changes in the battery socket as the cable was loose...]

    The temp and everything seems fine in diagnostics and no noisy fans or such!
    Sam L655D almost a year, is once appeared, but guaranteed ends in 2 weeks!

    Try to clean it. On Google you can find very good instructions how to clean the laptop using compressed air.
    Do it and check if the same warning will be displayed again.

  • Aurora - Premium option-DPN liquid cooling: 01YGW

    Thought I'd start a thread to compile some info on the new Premium liquid cooling option offered in the Aurora R4 News (and beyond). I welcome any definitive info from Dell Reps or users of the forum (which has one in their machine).

    Finally, some pictures of the bonus round-cooler (note, there no reference Dell Aurora R5 yet):

    http://www.alienwarearena.com/forums/thread/55035/hardware/Alienware-Aurora-R5-premium-cooling-explained

    Photo (as of 08/01/2013) reviews are still showing the original Standard hexagonal shape cooler

    http://www.Dell.com/us/p/Alienware-Aurora-R4/PD.aspx?~CK = anav

    Some of my questions:

    1. is premium Cooler also made my Asetek as unit of hex - in original form-cooler which has been installed in the models of Area-51 and Aurora since 2009?

    2. if ordered from Dell spare parts... What is the part number and how much does cost Premium copper cooler round?

    3 will be he existing R1 - R4 Aurora... pump/radiator (due to change in decision-making), but also the radiator Assembly?

    4. is it pin compatible with the Northern of existing R1 - R4, and it interface in the command center?

    5 If you order an Aurora-R4 with ALX chassis (for an extra $200), is cooler including premium and is already installed? Site selling text says it does, but the configuration options ALSO allow you to add Premium cooling (as an upgrade for $100) on the ALX model top. So, who is?

    Suggestion of Cass Ole, I took a 01YGW of STS-parts on eBay.

    I'm not usually keen on 'work shot', but I decided to take one anyway in the case where I need it. After all, it is the 'Aurora Premium Cooler"(DPN: 01YGW) for $50. I still can't believe that my Aurora R1 system is almost 5 years old.

    It happened fast. It looks almost new. I can check that the pump has required Black 7-pole plug, so it must plug into the MIO - Aurora 'Top lighting Commission' Commission without any problem. 4 - s piner of the radiator as fan (SYS_FAN) good. It also came with a sort of retention ring.

    It seems that the whole radiator and fan is a slightly different size, the old Standard in my Aurora R1. If all goes well, the mounting holes are compatible and it will be just right-in screws where the old one was (when the time comes).

    I guess I should have asked before that I bought it... but given that this is designed for an Aurora R4 and I have an R1...

    Due to the change of processor socket, is that going to the adjustment/working on my motherboard Aurora R1... Intel i7 - 930 (Socket 1366) Intel x 58 Chipset... as a Direct replacement? Dell says it's only for Aurora R4, but I really doubt that this is the case.

  • Satellite T210 - error has been detected by the cooling system

    I hope someone can help out me, I had a my laptop for almost a year, it's a T210 and occasionally it comes up with the following pop upward:

    WARNING: A problem with the cooling system has been detected. Please turn off your computer immediately and return it for service.

    If I click ok it does not go far but its obviously not resolved as long as he keeps breed. Any ideas what the problem is and if it is an easy fix or am I'm going to have to send it back to Toshiba?

    Thank you

    Hello

    Yes I know this error message that some people here in the forum reported the same error message and it seems to be a software bug
    The cooling modules are ok.

    As far as I know the new recovery system would solve this
    However, you should not be afraid that something is wrong with the cooling module system

  • Portege R630 - how to clean cooling system?

    I've had my Portege R630 for a few months now and I love it. HOWEVER! Small snag. I live is a House with 3 other people and it gets pretty dusty. Not really bad, but I'm not going to lie it's almost clinical environment. Now, my R630 started having what I think is 'too hot' for processing power used.

    Currently, my CPU usage is between 10 and 20% according to time and PC Health Monitor, my system CPU are 60% and my fan runs at 50-60%. My system has the Core i3 2.53gHz processor, unusually warm for the system?

    And if my guess is so dust is linked. But how to clean the radiator on it? It's not really normal. I can get my hands on a can of compressed air, but because the fan is so far away from the CPU, the dust could be everywhere on this side of the laptop. What is the best way to get clean?

    Thank you very much!

    Hello

    Cleaning of the cooling system is not complicated. All you need is to jet of compressed air that you can buy from every computer store I think.

    Before to start the cleaning procedure remove the AC/DC adapter and battery. Turn the laptop around, then blow air gently and shortly into the holes in the case. This will blow out the dust.
    As you can see is very easy and it of not necessary to disassemble the laptop.

  • Satellite L50D-B-15Z problem with cooling system

    Hi, I have a laptop about a year ago. And for 5 months, I have a problem with the fans. Out and the following message is displayed:

    WARNING: A problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

    The strange thing is that the first time that is spent stopped working a week, then a month and finally stopped working until 3 months there now will not start.
    I have even the implied warranty of the product, but I didn't think to send because it takes virtually every week for classes. I can use it, but if I perform actions that require superior performance as playing the games or download several videos at the same time to start warming up, getting the message and if continuous closed finally down.
    What should I do and how can I solve the problem?

    Sorry if I do not quite understand. I do not speak English.

    There may be dust stuck in the heat sink.
    using compressed air to blow dust through the vent.

  • How to kill the cooling system warning that slows down the CPU?

    Laptop: Satellite S2450-101

    Please help me ;-)

    I had problems with a fan on the motherboard connector. I'm a "craft" bridge to make it work. Now, I was able to control temperatures: I do the works of CPU to 100% and the temperatures indicated by 'SpeedFan' remains to the "Local Temp = Temp 36 ° C / 44 ° C and 43 ° C = Temp1 = remote." The exhaust gas remains 'soft' and never hot as bafore (60 ° C and more). Now, I think it's actually safe... BUT... I still have a lot of unpredictable warning that slow (and it's deep...) of the processor.

    It is said (translation from the french): _ "WARNING: an error was detected on the cooling system." Shut down your computer immediately and consult our provider "_".

    To be honest, I don't know if this is really the connector error... maybe other hardware (probe...) or a software problem. * I just can't use my computer with this warning... Please, help me to kill this process or perhaps only to stop the "crunch" of the processor *. I do research in the registry, but without success.

    Thank you.

    Best regards.

    If I understand you correctly, you manipulated mainboard and now you also want to manipulate this warning.
    As I know the owners of laptops have no influence on this warning and you can not disable it so just.
    What would happen if each of us might be able to turn off all annoying warnings and ignore the material damage?

    Let's see what other forum users have different opinions.

  • Satellite A660 - message: WARNING: a problem with the cooling system

    My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

    So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

    He also mentioned that I could use the machine with a cooling pad until then if I wish.

    Any feed back?

    > Yes the fan had stopped working and touchpad area was hot.

    In this case, there is really a hardware problem.
    But I m wondering why he should replace the HARD drive and the motherboard
    Perhaps only the cooling module began at malfunction of course this is just a speculation
    If the technician has checked the material, then they need to know what parts are not OK.
    So don t think you have no choice.

    But the guarantee is valid for all is free

  • Problem of cooling system on my Satellite C660

    Hello

    Have a new Satellite C660 I used it for 2 months and he started to give me the following system warning

    It has detected a problem with the cooling system please pay immediately the computer and return it for service.

    So what could be the problem I imported the Zimbabwe, which means that it is difficult to return it for service

    In my opinion, it is not important what can be the problem. Important is that this must and should be solved by the authorized service provider. Warranty will cover all costs for replacement of equipment.

    I guess this can be problematic in your country, but I put t see any other solution for you.
    Where have you bought your laptop?

  • Satellite P500-12D - a problem with the cooling system has been detected.

    Hi there everyone,

    I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
    WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

    Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

    TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

    Hello

    Which program gives you this error message about the cooling system?

    Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
    Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    If it doesn't help, contact the nearest service partner.

Maybe you are looking for