Non-accessible HARD drive is setup installation of Windows XP on my laptop

Similar Questions

• No visible hard drive during the installation of Windows 8 during the transmission phase of gathering primary.

  Hello

  I recently bought an Alienware m18X R2, and I wanted to install windows 8 (new installation) on this subject. I go through the ordinary procedure and boot from disk or during the time to choose the main drive for the installation. None of the drives are visible (error. no driver drive drive-impossible to find discs), this is the same error that occurred when I resorted to a regular update. Kindly advice. I have 2 drive HARD 500 GB in RAID 0, and a 64 GB SSD to set caching.

  Rémy

  What you need is the driver of TSRI Intel (see below).

  downloadcenter.intel.com/Detail_Desc.aspx

• hard drive missing after installation of windows 7 from vista on hpdv9700

  I had windows 7 installed on my hp Pavilion dv9700 and now the hard drive does not even show up on Device Manager. Wholesale I travel and need the computer for business. I went to the site to fix and it downloaded and was extracted, but did nothing.

  You refer to the cd drive?

  This fix? do you mean the cd MS Fixit?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  There are some models of dv9700 series 6 and HP does not include drivers for win7

• recognize the hard drive in the installation of windows

  I saw a couple of discussions on the same issue, but I've never really seen any resolution.

  Basically the hard drive died on a 400 XPS that has one of my friends.  Don't not tech trend may it staring at me.  He has unfortunately had no CD.  Leaving that issue behind, I acquired a replacement hard drive and when I go to install it on windows, windows will not recognize the player as being there to install on.

  Now I realize that I have to press F6 to load drivers to allow windows to see the SATA drive.  His point that escapes me.   I can't find the drivers to be able to do.  The dell with the drivers page doesn't seem to have what I'm looking for, unless I'm totally their lack which I won't deny is possible.

  So basically I'm looking for assistance in finding these drivers told to reinstall windows.

  
  

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• I am trying to install Windows 7 on my hard drive, but the installer tells me that I need the driver "Promise Technology Inc. Ultra IDE Controller".

  I'm trying to install Windows 7 on a (40.1 GB) partition on my hard drive, but the installer tells me that I need the driver (Promise Technology Inc. Ultra IDE Controller.  I searched the Internet and tried several, but no results.  Can someone point me in the right direction.  I have a box to open with Technical Support, but not a lot of help out there.

  Thanks in advance

  Joe Franklin

  original title: installation of Windows 7

  Hey Joe,

  I suggest that you visit the gigabyte website for your region (and/or the site global http://www.gigabyte.com/?f=g ) and check your motherboard for compatibility with Windows 7.

  The problem you are experiencing would imply that Windows 7 has no native driver support for your disk controller, so if Gigabyte don't have drivers that you are locked unless you buy a discreet disk controller that is compatible Windows 7.

  Please mark this as useful or response if applicable.

  On the other hand, you have this posted in a forum of Windows XP when it is really a problem of Windows 7.

  Tricky

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• I have windows 7 installed on my laptop. I want to format my hard drive. Should I buy windows 7 once again as I format my hard drive?

  I have windows 7 installed on my laptop. I want to format my hard drive. Should I buy windows 7 once again as I format my hard drive?

  Im doing just because my computer is slow and its time to format the hard drive... so I need to wipe it off, but I don't want to lose windows in the process

  If Windows 7 is pre-installed on laptop, Mike instructions don't you will lose Windows 7. If you bought Windows 7 separately and allows you to format the computer, which also does not let you lose thel travel when you format the drive from your installation disc.

• Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate?

  . I am trying to install a disk hard external sata 3 TB

  It would be only format 2.3 TB. Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate? If so, is there a way to enlarge it.

  Vista only supports drives of 3 TB for storage of the data and do not install the Vista operating system on this drive.

  Read this: http://msdn.microsoft.com/en-us/windows/hardware/gg463525.aspx

  J W Stuart: http://www.pagestart.com

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• Windows 7 sees no hard drive in the installation program

  MB: Gigabyte GA-X58A-UD3R

  BIOS recognizes the hard drive SATA and IDE is set.

  HD is installed in channel 6.

  Hard drive was working fine before I reformated using the installation disc and am not convinced that it is a hard drive failure.

  I can access the drive on CMD in the full version of Windows 7 dvd.

  I reformatted the hard drive from the RAW to NTFS format, but did not have any partitioning prior to formatting. I don't know how to partition on a Virgin HD no OS.

  The MB is assigned to the IDE is really a driver problem?

  It is as if Windows 7 does not recognize it as a hard drive.

  Photo 1 (installation of windows 7)

  Photo 2 (diskpart cmd.exe)

  I'm totally ideas and I think it's a simple solution that I don't know how or where to look.

  He solved.

  What I did this from the site Microsoft...

  Method 8: Use the Diskpart.exe utility to clean the disk, and then run the Windows Installer again

  If you have tried all the methods that are listed in this section and the problem persists, use the Diskpart.exe utility to clean the disk, and then run the Windows Setup program again.

  Note Use this method only if you want to perform a new installation of Windows. When you clean the hard disk, it is formatted. All data on the hard drive and all the partitions are deleted permanently. We strongly recommend that you back up the files on the hard disk before cleaning the disc.

  To use the Diskpart.exe utility to clean the hard disk, follow these steps:

  1. Insert the DVD into the DVD drive.
  2. On the disk selection screen, press SHIFT + F10. A command prompt window opens.
  3. Type diskpart and press ENTER to open the diskpart tool.
  4. Type list disk and press ENTER. A list of available hard disks.
  5. Drive of salt of type number , and then press ENTER. number is the number of the hard disk you want to clean. The hard drive is now selected.
  6. Type det disk, and then press ENTER. A list of partitions on the hard disk. This information is used to verify that the correct drive is selected.
  7. Make sure that the disk does not contain required data, type clean all and then press ENTER to clean the disk. All partitions and all data on the disc is removed entirely.
  8. Type exit and press ENTER to close the diskpart tool.
  9. Close the command prompt window.
  10. Click the Refresh button to update the disk selection screen. This step lists the disk. (I installed the driver in this step)
  11. Restarted the computer because the interface was giving me errors.
  12. Run Windows Setup to perform a new installation of Windows.

• Satellite A200 could not recognize the HARD drive during XP installation

  Hi all
  I need help with my laptop, please...

  My problem is,
  I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...

  I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?

  The question is:
  How much is real?
  How can I install XP on my PC now?
  can I install Storage Manager while I'm on Vista and then install XP?
  I put the Storage Manager on a CD and boot from it?

  am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated

  Thanking you a lot in advance

  Hi abu´s,

  Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!

  Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  Cheers and good luck

• Portege 4000: After HARD drive replacing WinXP installation stopped

  Drive HARD original of my old laptop Portege 4000 just crashed. I went to the local computer store and bought a new Samsung 40 GB HDD (no part no MP0402H) what they recommended. First of all, I have problem to him have partitioned and formatted when it is installed in the computer. Only, I managed to have 25% partitioned only 2 GB?

  Then, when I try to install Win XP Home with the boot floppies that the installation will stop when you insert the disc 6. The new HARD drive is recognized properly by the computer?

  Can I somehow get into the BIOS and change the type of HARD drive?

  Hello

  Stand by. AFAIK the unit has just two (1/2 and 2/2) recovery CD and just sold in Switzerland has several recovery disks (three languages).

  Can you please be more specific about this? At the beginning I have will be just understood what you are trying to do.