Non-unique Jobticket.xml ID names after the initial transaction, what gives?

Similar Questions

• Index on non unique values in order to avoid the full table scan

  I have a table with > 100 k records. The table is updated only during the race every night. All columns except one have non - unique values and I am querying the table with this request.
  
  COL3 - non - unique values - only 40 distinct values
  unique values - no - COL4 - 1000 distinct values
  last_column - 100 k unique values
  
  Select last_column in the table_name where in (...) col3 or col4 (...)
  
  I tried to create a Bitmap index individually on col3 and col4 and also combined. However, in both cases, it performs a full table scan.
  
  Please, help me optimize this query as it is used in the term altogether the system and the cost of the query is very high around 650.
  
  I don't have much experience with popular indexes then all tracks.
  
  Thank you
  Sensey
  
  Published by: user13312817 on November 7, 2011 11:32

  An alternative might be to use a union instead and the 2 index:

  create index my_index1 on my_table (col3, last_column) compress 1;
  create index my_index2 on my_table (col4, last_column) compress 1;

  Select last_column from my_table
  where col3 in (...)
  Union
  Select last_column from my_table
  where col4 (...)

  In other words, if the UNION would apply here whereas in double values for last_column will be deleted.

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• When and how can you synchronize browsers of two computers on the same account after the initial installation?

  I can't find any instructions on how to synchronize Firefox browsing data after the initial configuration is completed and the account is established. Everything that help guard reference section to be put in place, but not how to perform the synchronization operation after installation.

  Firefox syncs automatically, but you can force a synchronization by going to the Tools menu, and then click Synchronize now.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Download CS6 yet once after the initial purchase if I have a computer problem?

  When I buy a copy of Adobe CS6 download, download CS6 once again after the initial purchase (no extra cost) if I have a computer problem and the software is corrupted?

  Also, what happens if my computer is stolen with CS6 installed software, can I cancel it and reload the software again on a new computer ?

  Hi chrysalis.

  Yes, you can download CS6 once again without additional cost.

  Please use the link as a backup for CS6 downloads below

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  Please post on the Adobe Forums.

• CS5 - trying to load a new .asl style file - get "error, because no file format or the parser cannot open the file."  What gives?

  try to load a new style for a project.  CS5 PSD.  the .asl file when you drag in the RFSO gives follows her "error, because no file format or the parser cannot open the file."  What gives?

  .asl files are layer styles

  You can go to the window > Styles, then load the styles in the drop-down Styles menu of the

  

• workaround for the limitation of pilot ODI xml: same name of the element under

  Hello

  I have an xml schema, as shown below that has a (GTIN) name of the element that is repeated as sub in other element name type complex

  < xs: element name = "ArticleDetails1" maxOccurs = "unbounded" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "GTIN" type = "xs: String" minOccurs = "1" maxOccurs = "1" / >

  < xs: element name = "IETS1" minOccurs = "0" maxOccurs = "1" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "GTIN" type = "xs: String" maxOccurs = "unbounded" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  When I strip, I was hoping IETS1 tables and GTIN which will be a reference to the IETS1 table. But only IETS1 table is created to which several GTIN are ignored when the xml file is loaded (GTIN only the first goes to the table of the IETS1). If I change item under IETS1 say 'GTIN1' and then 2 tables is created for the IETS1 and another for GTIN1 and things work fine in this case.

  I came across this link Re: XML JMS queue: items with the same name
  

  who says it's a limitation of xml driver.

  I'm interested to know if there is a work around for this problem as long as it is not well known, but it is possible to change the name of the sub element in Xsd that came from another system?

  
  

  Thank you.
  

  Well, I discovered the work around. The trick is to give f = in url jdbc (instead of DTD path) and specify number (GTIN) nodes under the node of the IETS1.

• Add 'Pull the name' after the import

  Is it possible to add a name of photo shoots that have already been imported, I see not an option for this from the photo to rename

  If I understand the logic of name of shoot, shoot name exist only at the time of importation. It is not stored in the metadata of the photo. So the answer would be 'no '. Happens even for the session name attached.

  However, you can still enter the name (or name of session) as free text or text defined by the user in the Rename dialog box (if you already know).

  P.S. It is somewhat confusing that the model of dialog editor rename (not the dialogue itself) standard offer

  presets containing shoot name and name of the session, but when they are selected, shoot name and session name will be empty. I find this a minor bug.

• Nine (3 days out of the Box) HP Envy 700-230qe automatically restarts after the initial boot...

  I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support).  But again, I have problems.  I took late delivery December 23, 2013.  After giving him enough time to become the temperature of the room, I opened the box and replaced my old HP Pavilion h8 - 1210t with envy again desktop computer.

  Took my time and made sure that everything is properly connected - then pushed the power button.  Everything seemed to work perfectly - until what the brand 20 minutes - when the system powered off and rebooted itself.  But for the rest of the session, everything went well - no problem.  It was Monday night.

  On Tuesday morning (December 24, 2013 - on Christmas Eve), I pushed the power button once again and the system started fine.  But 20 minutes later, it turned off and rebooted itself.  But for the rest of the day everything went well - even if I had to make several reboots all reinstall my applications and migrate my data.  I started to wonder if I still had problems.

  Christmas day (December 25, 2013) is the same thing.

  And once again on Thursday (December 26, 2013) - I finally called HP Technical Support.  I spoke with a gentleman (Terrence) - he accessed remotely my system which makes me nervous (but these guys of Nova Scotia are very good and are savvy customers.  He looked around - ran MalWareBytes and CCleaner - and said that he saw nothing thaat would be a problem.  We agreed to wait a day and see what would happen.

  Rolled Friday autour and you'd know it's the same thing.  Then, I called HP Tech Support and spoke to a lady (Norma) who, after having read the file of description of situation and asking me my name, phone number, email address (which they ask you every time you call - you would think they write this stuff and keep it on file), she immediately decided that the best thing to do is to 'Recreate the IMAGE' on my drive - to which I replied 'NO WAY '.  This seems to be the standard response, if they can't fgure out - recreate the image on your disk.  They don't seem to care about all the work you put into the construction of our system with applications with associated and all data - they want to just Blow-It-Away.

  It made me so angry that I have immeddiately contacted my case manager company HP with the history.  These people - business - case do an excellent job, at least the one I did a great job.  And I know she'll get to the bottom of this situation and go to a happy camper.

  Anyway, if anyone has the same problems with their machine - I'd be interested.

  Kind regards

  Garth

  <>>>>

  I did not read all the answers, but what my qestion... Why are you screwing around? HP has a 21-day return policy, so you can ask them to replace it with the same model or another model as they will send you a FEdEx shipping for a full refund or Exchange label. I wouldn't waste my time with a question like this on a new computer.

• To use Robocopy to copy files, but you will notice that after the initial backup, it ignores the unchanged files, but I don't want it!

  Hello

  I use robocopy in Windows Server 2008 R2 operating system.

  Here #1

  I would like to use Robocopy to copy a disc (z) files on an external drive (f) and want to "full backup" every time regardless of whether the files have been modified.

  How do I do that?

  I tried to use the command

  Robocopy z:\ketchup f:\ketchup/e

  It works very well if there is nothing in this record, but once the initial order has been executed. It will skip all files of unchaged but I want yet it backs up to the top anyway.

  Want to #2

  I would like also to add a unique name that includes the date and time I'm it backup (in essense a new backup folder name that contains the date and time).  Hoping to place it under scheduled tasks as soon as I get going.

  Thank you

  Jess

  Hi Jess,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Microsoft Windows Server public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• After the preloader, so what?

  Hello
  I learned to create simple preload and then put a large image in the layer of 'content' after the last image of the preloader (eg. box 5). All preloaders work very well during a test, and the image appears as it should after execution of the prloader. However, when I then proceed to add additional content in the layers later (eg. starting in a keyframe at frame 20), additional content does not appear or work. When I debug the film, everything he says is "the Flash Player is paused for the Breakpoints can be adjusted. Click on continue to start the movie. » .. .whatever that means. That I am I hurt and how go ahead and build the film main Flash so that the preloader is running, then the main stage/film starts? My tutorial book is useless in this regard, and all web tutorials complete as soon as the big picture of content is displayed. Nice, but not very useful then to build a web page. Any help would be greatly appreciated.

  Ok
  Thank you sticker code - here's what you had to do:
  gotoAndStop (5);

  This indicates the playhead to go to section 5 and stop. All you had to do was to change 'stop' to 'play '.

  gotoAndPlay (5);

  Scenes do NOT exist in the compiled SWF file. All the scenes are merged with 1 chronology.

  Chris Georgenes
  Animator
  http://www.Mudbubble.com
  http://www.keyframer.com
  Adobe Community Expert

  *\^^/*
  (OO)
  <---->

  playz123 wrote:
  > Thanks a lot Chris, for taking the time to answer.
  >
  (> a) code for the preloader (thanks to Laukamaras.com for adults
  (> preloader tutorial):
  >
  > stop();
  > loadingBar._xscale = 1;
  > var loadingCall:Number = setInterval (preloadSite, 50);
  > function preloadSite (): Void {}
  > var siteLoaded:Number = _root.getBytesLoaded ();
  > var siteTotal:Number = _root.getBytesTotal ();
  > var percent: Number = Math.round(siteLoaded/siteTotal*100);
  > loadingBar._xscale = percentage;
  > percentClip.percentDisplay.text = percentage + "%";
  > percentClip._x = loadingBar._x + loadingBar._width;
  > bytesDisplay.text = "loaded" + siteLoaded + "" + siteTotal + "bytes."
  > If (siteLoaded > = siteTotal) {}
  > clearInterval (loadingCall);
  > gotoAndStop (5);
  >
  (> b) it seems that the line of code that was at the origin of the 'problem' was the
  > very last... so we can ignore basically everything, if I understand right now
  > what they're doing. Since I posted it first, I changed the code of the action above framework
  > 2 rather that frame a as described in the tutorial, deleted the last line of the
  > code above (IE. "gotoAndStop (5);"), labeled frame 5 (where the main movie).
  (> begins) as 'Start' and my scene of main movie as "intro" instead of "scene 1", and ".
  > Add another line of the script, so the end of the preloader script is now:
  >
  > clearInterval (loadingCall);
  > gotoAndPlay ("intro", "start");
  > }
  > }
  >
  > All now 'works' when the film is responsible for test, but I know that that last bit
  > the script isn't quite right yet. If the film is not completely loaded by
  > the end, I want it to do something else until it is. Since I'm only learning
  > action script, could I use something like:
  >
  > If (_framesloaded > = _totalframes) {}
  > gotoAndPlay ("intro", "start");
  >} else {}
  > gotoAndPlay ("intro", 1);
  > }
  >
  > I guess, in short, my problem lies in properly "binding" a preloader with
  > the main film/stage following frank...
  >
  >
  >

• U400 cannot start after the initial start of lenovo screen

  Hello
  I got my 400 U since May and it was great before that. I close the lid of my computers to sleep, but I accidentally moved.my wireless mouse. I opened it to put it to sleep again when I was greeted with a screen that I recognize not so I restarted the computer. Now, he can't move before the initial startup screen Lenovo. It says to press fn + f2 to set up or fn + f12 for.multiboot. No command works. The recover button, which brings me to the screen as well. What should I do? PS I have Windows 8 if it's important.

  Worse, he seems to have resolved itself.