normal and high volume settings

Similar Questions

• Satellite A500 - on the screen and the volume of media keys control the normal behavior

  Hello

  On my laptop Satellite A500, I have no screen 'volume bar' when I use the media keys of volume (located between the speakers). I find this odd, like many other phones that I use (including the Toshiba) have this feature. In addition, the volume bar between the - and + media symbols of the keys never lights upward.
  Could someone please confirm that those are normal behaviour? (Note that my Fn keys, utility eco work and so on).

  Records,

  ARAMYS

  Aramys salvation,
  I don't know if this is normal (showing no volume bar on screen)
  but as I read your message just the funktion is ok...

  Maybe you need to reinstall + keys +.
  Maybe some pictures are corrupted and therefore not included...

• Volume of the Satellite A200-1 DR is going higher and higher

  Whenever I try to turn the volume down, it does not work and the sound goes higher and higher (up to be maximally).

  I tried to change the configuration in the Control Panel, but it did not work.

  The only thing that I can do is to use the icon of audio (in the toolbar) but is quiet boring! what I could do to make the sound of moletes buttons work wheel again?

  Thank you!

  I hope that this is not a matter of mechanical volume control.

  I recommend you first update the BIOS.
  You should know that after installing Win XP, you must update the BIOS to version XP!

  After update BIOS to reinstall the driver of its new!

  Last but not least recommend reinstalling the driver for Toshiba controls and then Toshiba controls

  Welcome them

• How can I get my settings to save a window opening in Middle normal and maximized.

  Original title: cannot get windows size to save.

  How can I get my settings to record with respect to the windows that open in normal and maximized parameters.

  I did the right click on Solution Explorer icons and maximized value, but they open into small windows.

  Thank you

  Here are some instructions I've done for people who have this error message and are sometimes a little nervous about editing the registry:

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\system\currentcontrolset\control\windows]
  "ErrorMode" =: 00000002

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fix13.reg

  After you save the file, close Notepad.

  Locate the file fix13.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fix13.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fix13.reg file when you are finished.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Anyone know if where I can download the keyboard screen on again once... my normal keyboard broke, and some how I enlarged it on screen one and cant end settings or information to do little new... its takng upward all over my screen :(

  Try this:

  Ctrl + alt + delete > bottom left on the Page, click, accessibility > uncheck, magnifying glass, keyboard

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• How do you choose a clip that has track mixer volume settings?

  I feel stupid here. Volume adjustments were made to one of my tracks in the timeline. Now, I can't click to select one of the clips in this way. First is locked as being set to make adjustments to key frame. I can't select the real item.

  Other audio clips in different tracks in the timeline are completely 'selectable '. However, the difference here is that these clips are not defined to make volume adjustments. They have this little "FX" box in the upper left corner.

  How can I say first to return to the "normal" and not put it to add or adjust the keyframes of the mixer of tracks?

  I see nothing in the sequence settings. Nothing in the timeline view settings.

  You must set keyframes audio back to clips, not the track.  Expand the audio track header until the icon for this show.

• 6.18: others can not hear me after a minute of a call on Skype versions 6 and higher

  I went back to version 5.10.0.116 as for versions 6 and upwards, I can't talk. After about a minute of a call, I hear others without a problem, but they can not hear me or hear me in staccato (and it's the same for calls to Skype-to-Skype and Skype for phone calls). My computer runs on Windows 7, I have Norton internet security. I checked and re-checked the firewall settings and Skype is on his list. And I did it for each new edition of Skype 6 and higher version, as I had the same problem with all of them. Messaging works very well.

  Now, I received the message that the 5.10 version is removed... If I can't fix the problem with the version 6, I will not be able to use Skype, which is great annoying.

  Hey kerojarun,

  I join the diagnostic file, still do not have have a chance to make headlines. The attachment is a zip file containing the diagnostic log. I had to rename it to jpg, Portal refused to tie it as a zip, saying that the type of file did not match the extension.

  Regarding the log files, do I understand correctly that you would need to log version 6.18, not those of version 5.10 I currently use?

• High volume = video jerky on my P300-31i

  Hope someone can advise.

  I copied a few videos from Sony (Mini-DV) camcorder via the Firewire connection on my machine.

  Image and sound quality... usually brilliant!

  However some scenes include high volume music (in a case from a choir in a church and the other a 'disco' with a load of children dancing). In both cases, I noticed that the volume has increased the video began to become jerky and freeze periodically. At first I thought that the problem was with the files but I found if I turned off the volume on my computer has become smooth image with no stutters at all (by chance). Then I found that I could increase the volume up to 30-40% and the image was reasonably smooth with only the odd momentary gel.

  In conclusion, nothing wrong with the files (avoid in any case), but something wrong with my computer (or at least it has a severe limitation) that I can't play those avi files at full volume.

  I'm not a fan of computer, so all I could think to do was watch CPU useage while the video I did played by using the Task Manager - while the video was in use between 9 and 12% CPU.

  Grateful for any help that I can enjoy the full glory of these videos on my machine, especially choral bits.

  Concerning

  Lindsay

  Hope someone can advise.

  I copied a few videos from Sony (Mini-DV) camcorder via the Firewire connection on my machine.

  Image and sound quality... usually brilliant!

  However some scenes include high volume music (in a case from a choir in a church and the other a 'disco' with a load of children dancing). In both cases, I noticed that the volume has increased the video began to become jerky and freeze periodically. At first I thought that the problem was with the files but I found if I turned off the volume on my computer has become smooth image with no stutters at all (by chance). Then I found that I could increase the volume up to 30-40% and the image was reasonably smooth with only the odd momentary gel.

  In conclusion, nothing wrong with the files (avoid in any case), but something wrong with my computer (or at least it has a severe limitation) that I can't play those avi files at full volume.

  I'm not a fan of computer, so all I could think to do was watch CPU useage while the video I did played by using the Task Manager - while the video was in use between 9 and 12% CPU.

  Grateful for any help that I can enjoy the full glory of these videos on my machine, especially choral bits.

  Concerning

  Lindsay

• mouse control, LCD Brightness and sound volume

  Hi, I am designing a VI that allows people with disabilities (with no hands) to use the PC-control with the mouse, the brightness of the LCD screen and the sound volume through several sensors. I found how to do to control the mouse but still cannot find how to control the brightness (using setdevicegammaramp) or volume (using waveoutsetvolume). can someone help me with these two functions please?

  Try the attached VI. I don't know if it will work for your configuration, since other factors are involved in the brightness setting, such as the controls of the monitor and video card settings.

• COUNSULTING JET 6700 / after forest in the eprint centre and ranging in settings exploitation, I

  COUNSULTING JET 6700 / after connection to the eprint center and going into settings I filled the email from authorized users to send print jobs. Next time, I'll check authorized users only two of the five I entered are present.  Why are others deleted?

  If you have problems with ePrint Center (EPC) don't save contacts to the list of senders, I would use this process to try to get the account to save contacts.

  1. connect to ePrint Center

  2. click on the list of senders and add a normal user.

  3. click on Save after adding the address - do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer, disconnect and then come back in ePrint center and check the list of senders.

  If this above process does not work, it would seek to remove web services and adding it back.  This would cause one to lose their email address and need to reprint the code printer and set up the printer on the account again to the EPC.

• "$RECYCLE." BIN"and"System Volume Information"hidden folder created in each drive

  I got 15 HP r014tx Notebook in which "$RECYCLE." BIN"and"System Volume Information"folder created in each player automatically hidden name. It didn't get deleted if I try to remove it. I use McAfee Anitvirus come with pre-installed with 30-day track.

  I want to know how to remove this folder "$RECYCLE." BIN"and"System Volume Information"hidden folder name.

  rhl_yadav,

  It is IMPORTANT that you do not delete these files. They are very important to the operating system.

  Instead, you can hide:

  • Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options.
  • Click the view tab.
  • Under Advanced settings, make sure that "Show hidden files and folders" and "Hide protected operating system files ' are not checked, and then click OK.

  * TechWars *.

• by default changed to high contrast settings

  I have the high contrast settings and can turn them on by using ALT + SHIFT LEFT + print SCREEN.  With some of my students, somehow the computer chose the default high contrast setting.  I don't know how it happened, and he can't go back to the default setting.

  Hello

  1. what happens when you try to change the default settings? If you receive an error message and then, after return the exact error message.
  2. How are you trying to change?

  If you have not tried turn off high contrast so try:
  a. click Start, click Control Paneland then click Accessibility Options.
  b. click on the view tab, clear the use high contrast check box.
  c. click OK.

  For more information, see the following articles:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/access_highcontrast_turnon.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/access_highcontrast_settings.mspx?mfr=true

• Is short boot fail reason (error 1000-0146) Office of glitter and high cpu?

  Dell inspiron 6000. Windows xp professional sp 3. Three weeks ago, my computer started loud beep on startup and sparkle of the desktop icons. The touchpad has stopped working for a while, but most of the time which is fixed. I installed malwarebytes' eliminating about four Trojan horses and tried to update all the drivers. I did a restore of the system about 3 times. When I ran a test drive, there was a failed test short boot 1000-0146 error. When my app icons start to Flash my cpu jumps to 100%. Pressing any key usually stopped for a bit. Is this a compatibility issue with my software or the failure of short boot is the cause. Help!

  Hi Nutmeg30,

  • Did you the latest changes on the computer?
  • You have security software installed on the computer?

  Learn more about the test of startup failures see link below on the Dell site and check if it helps.

  Pre Boot System Assessment (PSA) Diagnostics and Error Codes for Dell computers

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_300428&isLegacy=true

  It is possible that some third-party programs installed on the computer is causing the flickering and high CPU utilization issue.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Error message when turn on computer so very strong and high beep for a minute, already entered in the password box and typing of characters is uncontrolled.

  When I turn on my computer an error message flashes but it's too fast to read, after which there is a strong and high slope beep. Then he'll ask me if I want to start my computer on Vista or run the memory diagnostics. When it gets to the entered password there are already characters and trying to type at other times the space key is out of control.

  I have run memory diagnostics and the computer to the factory settings of disks that I made, but it has not worked and I was just wondering if anyone knew how to fix?

  Thank you

  http://www.helpwithpcs.com/upgrading/post-beep-codes.htm

  http://www.computerhope.com/beep.htm

  If sounds like you have a hardware problem.

  Check the links above to find an explanation for the error "" beep ".

  See you soon.

  Mick Murphy - Microsoft partner

• Beats Audio disappeared and low volume

  Hi all! I recently bought a new laptop: HP Envy dv7 (product number: COT81EA-#ABZ) with Windows 8.

  The other day my audio just stopped working. He said that no output has been installed. So, after looking over several forums, I reinstalled the driver by using the Recovery Manager. Now the volume has started to work again, but it is much lower than before. So I wanted to open Beats Audio and see the settings, but it disappeared completely! I've looked everywhere for it. I even tried Recovery Manager, but it's not there either.

  Can someone help me please?

  Hello Bianca92,

  I understand that your sound does not work very well.

  Go to Device Manager and uninstall the IDT audio.

  Here is a link that will show you how to enter the Device Manager.

  Go to HP.com and update the audio.

  Here is a link to your driver updates. You will need to put in your product number and your location.

  You can also update the BIOS.

  I would like to know how everything goes.