Norton Ghost HD picture not start correctly

Similar Questions

• 6 Lightroom does not start correctly

  LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.

  There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.

  The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?

  What should do? Help!

  Hi bjomb,

  You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.

  This would create a new catalog.

  check if it opens the new catalog, and it passes under the background processes in the Task Manager.

  If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.

  Kind regards

  Claes

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Mac does not start correctly

  Hello, my Imac does not start correctly. When he plays the macsound boots but only half of the load of the boot. Then it restarts.

  What I have done:

  (1) unplug everything and held the power button for 10 seconds.

  (2) held the shift key--> after that I have a few bluish vertical lines

  (3) held cmd + option + P + R-> after I have a few vertical lines bluish, but bigger

  (4) held the c key

  (5) very slow D

  (6) CMD + V-> it's fast to read and to search for errors

  After all these different things, randomly I these bluish vertical lines and sometimes a few flickers on my screen.

  Can someone help me?

  If I need to reinstall I can recover my data?

  I appreciate your help and thanks for your help.

  I solved the problem! I googled a lot and I found that it was the GPU was down. Well, I searched and found the solution...

  I think that apple don't want to hear or see. But if you are a little technical or handyman, Cook your GPU in the oven. Yes, bake your GPU in the oven! See the link: https://www.youtube.com/watch?v=9vPM41ZmLos

  I warn you all, be very patient and very carefully, or you can destroy your beloved mac. The case may go to an apple store workshop.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Flow: Not started correctly

  My phone ran into a cycle and does not start. He goes along and always ends the automatic repair screen with the message "your PC is not started correctly.

  Hey @elmarcano,

  Before I provide documentation for troubleshooting that you can use, I would like to take a moment to welcome you to the HP support community!

  Note: Make sure that the AC adapter cable is not plugged into a power strip, surge arrester, or secondary power source. It should be directly into a wall outlet. Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You have beep codes or flashing LEDs?

  If you have no flashing caps lock Num or Num Lock LED, how many times it flashes in each interval?

  Did you do a BIOS reset?

  Have you tried to do a hard reset?

  If the computer is turned on, you hear the fan running?

  If the computer is on, but the screen remains blank, please see computer starts up but screen remains blank.

  Do you have the recovery disks?

  You also mentioned that you see, "Your PC is not started correctly". You can try to repair your laptop by a refresh:

  • Click on Advanced Options
  • Click on solve problems
  • Click on reset this PC
  • Click on keep files

  Once done, please see if you can get into your operating system. If this isn't the case, you can only solve the problem by performing a recovery of the system, which can, unfortunately, erase your data. This YouTube video can show you the steps of troubleshooting involved.

  Please NOTE: you may lose your files on your laptop. The copy of files from command line option may not work for you when reloading the operating system.

  If you need assistance, I would be more than happy to help! Please let me know the detailed answers/results of troubleshooting above. If this answer resolvesyour issues, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution at the bottom of this post.

  To simply say thank you, please click the Thumbs up below!

  Thanks for joining the community of support HP!

  Have a great day!

• My computer blocked at crcdisk.sys and do not start correctly.

  Original title: my computer does not start correctly

  my computer does not start up correctly it keeps stuck on the pilot after \crcdisk.sys on windows 32 - bit home premim

  I have the productkey

  Hello

  1. you start your computer in safe mode? If Yes, it works very well when you start your computer in normal mode?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can start your computer in last good known Configuration mode.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2

  We can repair the startup of the system recovery options.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3

  You can perform system recovery options system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Post your answer for you help in this matter.

• Computer will not start correctly even after rebooting.

  1. repairs to start but the same problem occurs again the next time the computer is turned on.

     OT: Startup Repair work and its working properly and then works the next time its switched on. but more often the computer will start up again and the restart process everything must be done again

  Hi David,

  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Method 3
  I suggest you try the steps from the following links:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

• Sidebar gadget / whenever I connect I get an error message indicating that google desktop did not start correctly

  I have a side bar to the right of the office, the problem is, whenever I try to click on an icon on the toolbar at the bottom, a vertical translulent [box, rectangle, border?] appears in the sidebar and the items on the toolbar at the bottom, me disabling click on the items on the toolbar.  Is it possible to resize or remove the [box, rectangle, border?]?

  ALSO, whenever I log in, I get an error message indicating that google desktop did not start correctly.  but I have not found a solution to this problem.  can someone help me?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use the Progam below to remove annoying boot for her entry to the problem of Google:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• How fix the Application could not start correctly (0xc0000142)

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Hi, JTS,.

  First was working fine until I did the last update today. After update, I clicked on the shortcut for the first and got the application could not start correctly (0xc0000142). So I uninstalled and reinstalled and got again. The tool clean adobe and still got it. Erased from my computer and a new downloaded installation creative cloud and installed first again and still got the error. Anyone had this problem with the new update?

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• The application could not start correctly (0xc000007b) hearing CC last fix? Teacher of Win7

  A different user name, password,..., control given to the creative cloud, install hearing... then

  "The application could not start correctly (0xc000007b)" in the hearing of the CP. So re-installed. I offended want to spend hours trying to get Adobe software to run.  It's my download trial application to see how it worked. And he does not. And there are a lot of messages with advice complicated... ending by - go looking for someone to chat support. And they are not available. aaaaggggghhhhh

  I am now worried that installing any other application of dnuee may cause problems on my PC with Adobe's other SW.

  What is the newest way (and hopefully simple) to get this program to run?

  I have no ilivid,

  I: CS5, teacher of Win 7, installed through some Soft Adobe dnuee who told me to install and use to manage your CC account,.

  Grateful for all who can wand.

  Especially linked gave this soln:

  1. Please try to download a DLL https://drive.google.com/file/d/0B4eWI-NGpmnuTUxPQVIxYThSNlE/edit?usp=sharing

  2. the package contains the msvcr100.dll and msvcr80.dll files. Extract the contents of the package at the following location:

  ....

  I copied the 2 files DLL in the folder C:\program files\Adobe\audition cc 2014 and it worked. SIMPLE! YEH.

  Thank you

• Satellite A10 - does not start correctly

  I have a Satellite A10 and I can't start even last known good configuration or in safe mode does not work and if it starts it will take much time but a blue screen appears and indicates that an error has occurred and prevent any damage on the hard disk.
  I put in the recovery cd, but I do not have the cause of xp, it is said start windows 98 but im on a xp pro I got when I bought the laptop. So, if any of it can help?

  HI Johan,.

  If you are unable to boot from your hard drive, then your only other option will be to boot from a CD-ROM.

  Most of the commercially available backup utilities (Norton Ghost, Acronis True Image, etc.) include such a bootable CD. Supplied with your laptop product recovery CD is very probably a stripped down version of Norton Ghost, which is specifically designed to format your hard drive and then restore an image of 'Phantom' of the original OEM software.

  It is quite possible for your hard drive to be damaged and have still LED lights when it is accessed. The damage might be the physical mechanism of the player, or the lining of the surface of the platters etc.. A CD bootable one of backup utilities will probably include a version of CHKDSK, you can run to test the integrity of your hard drive. Norton, for example, include a copy of Disk Doctor.

  If you have a copy of the original Windows installation CD, you can boot from that in the recovery console and try to repair what is damaged on your hard drive, assuming that the problem is that the damaged or missing files. In principle, you can use the XP Home Edition CD to do this only if the damaged files are not specific to XP Pro to which cases they will not on HE drive.

  HTH