Computer will not start correctly even after rebooting.

  1. repairs to start but the same problem occurs again the next time the computer is turned on.

    OT: Startup Repair work and its working properly and then works the next time its switched on. but more often the computer will start up again and the restart process everything must be done again

Advertisement

Hi David,

Method 1
Step 1:
I suggest to start the computer in safe mode and check if the problem persists.

Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

Method 2
I suggest you try the steps from the following link:

What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

Method 3
I suggest you try the steps from the following links:

Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
http://support.Microsoft.com/kb/927392

Tags: Windows

Similar Questions

  • Restarted during the update of windows, computer will not start correctly

    I recently formatted my computer and reinstall all updates. Recently, I accidentally shut down the computer during the beginning of an automatic update. I restarted the computer and it starts up to the circle of windows vista, made some noise, but then the screen flashes and turns off every 5 to 10 seconds. The hand sign and a symbol of loading can be seen through.

    In addition, the sound stops for a moment and then continues. It seems broken.
    I did restore the several points system and system repair, and nothing helps. System restore failed and system repair said everything was fine.

    I recently formatted my computer and reinstall all updates. Recently, I accidentally shut down the computer during the beginning of an automatic update. I restarted the computer and it starts up to the circle of windows vista, made some noise, but then the screen flashes and turns off every 5 to 10 seconds. The hand sign and a symbol of loading can be seen through.

    In addition, the sound stops for a moment and then continues. It seems broken.
    I did restore the several points system and system repair, and nothing helps. System restore failed and system repair said everything was fine.

    =======================================
    You try to run Safe Mode system restore?

    Windows Vista - start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Also try the last known good Configuration.

    Windows Vista - using the last good known Configuration
    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  • Stuck on the web page.  Will not be closed, even after rebooting.  How to do this?

    Went to a web page, in what I thought was the correct user name and PW.  Would not accept it.  Tried a couple of times and then click Cancel.  Don't cancel.  Finally stopped MAC, waited a few minutes and restarted.  When again I opened Safari, web site and PW always ask here.  Can't get out of it.  What can I do?

     in the menu bar and choose "force quit."

    Select Safari and click "exit of strength at the bottom of the window to Force Quit.

    Hold down the SHIFT key and launch Safari.

  • Computer will not start correctly.

    When power on it will display the pentium inside the emblem and the name of the gateway, then goes to just a dash or underscore in the top left corner of a black screen. We cannot go further than that. Can you help me?

    I think we can have fried the Processior? I opened to check the conections and found that all fans have pluged with excessive increase of wet dust. the processior had got so hot that it melted the seal between the cooling plate and the processior. If someone has a sugestion to make sure what is wrong and how test it would be verry much apreciated.

  • AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

    AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

    Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

    Hi BrianJ641,

    Follow the steps in the article.

    http://support.Microsoft.com/kb/307545

    Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

  • Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

    Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

    Hi ipitedafoo,

    You can check if this article helps.

    Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

    See also:

    Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  • Computers button just flashes and the computer will not start

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Hey Bowers

    you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

    otherwise, it would seem that you have a hardware problem

    Contact the manufacturer of the computer or a local reputable computer repair workshop

    Walter, the time zone traveller

  • Vista - computer will not start without the disc

    loaded vista on my computer - now computer will not start without the disc

    Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

  • I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

    I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

    How can I fix it? Nothing in help or on the Site.

    Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

    That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

  • After installing windows XP Pro my computer does not start correctly

    After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

    PA bear,

    Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

    Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

    HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

    If your computer hangs on reboot 'loop', see if this info. HP will help you:

    The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

    If you have had problems with XP updates, including service pack 2 or 3, try this page:

    Before you install Windows XP service pack 3

    Please pass on to other similar issues.

  • computer will not start with the disc

    I use vista and my computer does not start because of a corrupted file.

    I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

    I changed the bios to boot from the cd as first choice but still no results.

    can anyone help?

    Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

    I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

    Any help would be greatly appreciated.

    If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

    The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

    What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

    Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

  • Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

    After the updates of this week, the system will not load anything.

    Hi Juliet,

    Thanks for asking the question in the Microsoft Community forum.

    From your description, I understand that after Windows Update, you can not load Windows.

    To better understand the question, please answer the following questions:

    1. What is the version of the Windows operating system that is installed on your computer?

    Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

    2. what happens when you try to load the system? You receive an error message?

    3. what application or anti-virus security suite is installed on your computer?

    4. you remember after installation of update, you are facing this problem?

    Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

    If you are using Windows 7 and Windows Vista, follow the mentioned methods:

    Method 1:

     

    If the computer does not start in safe mode, perform the last known good Configuration.

    Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

    Note: Link above also applies to Windows Vista.

    Question remains always use same method 2.

     

    Method 2:

     

    Try to perform the Startup Repair and check.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

    If you are using Windows XP, follow the mentioned methods:

    Method 1:

    Perform the last known good configuration.

    http://support.Microsoft.com/kb/307852

    Method 2:

    How to fix a computer that does not start

    http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

    Hope the above information is useful, if you have any question back to us, we are happy to help you.

    Thank you.

  • Computer does not start correctly

    When turn on/off windows update 3/3 is displayed, then stops. Will not start in safe mode, just continuing to show the update then stops and restarts repeatedly

    If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~]

    If the problem persists:

    Windows Update Forum:

    This is the Vista operating system repair and recovery Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • My computer will not start - ntoskrnl.exe is missing

    Original title: my computer does not start upp

    my desktop does not load upward. I turned on and the following message appears.

    Windows didn't start because the following file is missing

    corrupted:

    Windows root>\system32\ntoskrnl.exe.

    Re - install a copy of the above file.

    is there something I can do?

    I don't have the boot disks.

    There were no power failure, etc.?

    The system is equipped with a CD/DVD player?

    I suspect that AVG has quarantined (effectively deleted) your way of thinking of ntoskrnl.exe file the file has been afflicted (it's perhaps), but there are copies on your system in other places, so you can simply replace the missing file.

    I would normally say that make you a XP Recovery Console bootable CD that you can create (no XP media required), but since you have XP Home Edition, which can frustrate you if you do not know the XP administrator password.  We can do the part later because it would be a good CD to have.

    Make a Hiren boot CD, boot your system on this CD and find your XP installation boot drive for a copy of ntoskrnl.exe and copy / paste the file into the c:\windows\system32 folder where it belongs.

    Places to find backups of critical files on the XP system are:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    Answered in the affirmative if invited to replace the existing file.

    If that's all you need to do to get there, you should consider broadening your horizons beyond AVG antivirus antimalware if you do not have this or similar problems.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.org/

    On the left, click on download, scroll down, choose the most recent version

    The download link is a little difficult to see and find, for some reason, so here are some ideas (they seem to change around for a reason, but that might just me my interpretation).  If you can't understand it, let me know so that I can update my copy/paste route.

    On the page for the version the most recent are information pages on what has changed in the latest version.  Look to the bottom of the page and you will be on page 1 of a number of pages (1 of 2 of 9, 9, 9, 3)...  The link to download the ZIP file is on the last page that is now for version 12, page 9 (or click on the end button).

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.

    More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Maybe you are looking for

  • My WGR614v10 router will not connect to internet

    When I connect my computer directly to my modem I have a fast internet connection, but when I try to connect through my router I can not to surf the Internet. MY router was working fine two days ago.

  • Pavilion g6 1202-TX: driver problems after update to 8.1 Windows

    Hello I've recently updated my product to 8.1 of Windows and even if I have material for a sound SRS surround, I can't find the software patches necessary to return my sound quality to its original levels of Dolby. I have already installed the IDT au

  • Unable to connect to NOAA.gov, but OK on all the other sites... WRT54Gv6

    I can not connect to the public site weater NOAA.gov and weather.gov, but have no problem connecting to other sites, private public. I have the following information: WRT54Gv6 wireless with v1.02.08 firmware (5 October 2009)... the most recent. 3 dev

  • Interference WRT400N Wireless Router problem.

    Hello!  I would be grateful if someone can help me with my problem.  I live a mile on a mountain.  When a vehicle comes to the top of the mountain at a certain point, we get interference which causes the computer programs and the internet to freeze u

  • keyboard not available during a conversation

    Hi allI own a Z3 someday.When I received a phone call, the keypad is disabled (it is not), when I try to use Chrome or even if I want to send an SMS. Does anyone have an idea? Thanks in advance


HashFlare