Cannot start after the formatted NTFS partition

Similar Questions

• Cannot start after the blue screen "page in the nonpaged area failure."

  My sons laptop has got to me.  There the error page blue to come with "failure page in the nonpaged area." There is a chain of technical info of numbers, but this changes a little at each attempt.

  I tried all F8 options, without success.  I did a restore disk from the laptop of my other son (which is the same) and that has not worked and I also downloaded a file of system restore on the internet who do not.  I ran diagnostics memory on the scope option and who found nothing.

  No matter what I try, always the fails to start after the first screen with Microsoft Corporation at the bottom and the small lights of scrolling!

  I would be grateful for any suggestions that anyone can have.  I wondered if I should try to borrow a disc of Windows Vista from someone and try from there?

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• a1720n cannot start after the installation of the DVD from LG GGC-H20L drive

  I installed the unit and connected to the second channel SATA (blue) and the computer would not start.  Disconnected and the system returns to normal operation.  It appeared that the system was able to read a correct reader type in the BIOS.  I couldn't find any instructions online documentation SATA configuration.  I will apprecaite the ideas or the BTDT there!  Thansks!

  Thanks for your quick responses!  I advanced and tried to just connect the drive again and the system booted properly.

  When I said that the system does not boot, it would go beyond the BIOS screen but should restart after trying toload windows.  Subsequently an any a GUI recovery came, ather than aloowing system to restore from an earlier time, I told him to try an automatic recovery.  This process was then several minutes before failing.

• Cannot start after the administrator or power on password screen

  When I try to start to get to where I can fix the computer I start on a back screen which asks for administrator password or power. Don't remember what I put it in the bios. 3 strikes you're out, and you see the message screen 56631584 "prevent the system." hP laptop DV 4 2140US pavillion entertainment notebook running win 7 premium home edition. How can I make this page? Will try to find the used bios and try the a passwords bios generic. Any other suggestions. Feel pretty stupid as I did for myself one night later, change the password. I always
  Tell people to stay out of the bios and does not. Take my own advice. Have a backup in the secondary drive and restore files on the partition on the computer. Any help make me it past this screen would be most appreciated!

  Try > 49799500

• Cannot start after the running virus scan

  I have anti-virus protection McAfee suite through our cable company.  I got a message from windows, my computer has virus.  I did a scan of McAfee and he said everything was fine.  After rebooting my computer, the monitor is just a white screen.  What can I do?

  Hi kahw,

  ·         Did you try to start in safe mode?

  ·         You receive a message during startup?

  You can check if the following is useful.

  Method 1: Use the last good known Configuration in the Advanced Start menu and check if it helps.

  Method 2: Try to start in safe mode and check the number.

  Just reply with the results.

• Dell Dimension 8200 windows xp cannot start after the replacement of old CD drive by mounting drive DVD LG GDR-H30N

  Hello guys please help!

  I tried to mount the new drive & replacing the old CD player... the new player can work, but windows xp does not start... It's just a black screen...

  Please advice, thank you!

  Message edited by Don86 on 07/21/2008 04:41
  
  

• U400 cannot start after the initial start of lenovo screen

  Hello
  I got my 400 U since May and it was great before that. I close the lid of my computers to sleep, but I accidentally moved.my wireless mouse. I opened it to put it to sleep again when I was greeted with a screen that I recognize not so I restarted the computer. Now, he can't move before the initial startup screen Lenovo. It says to press fn + f2 to set up or fn + f12 for.multiboot. No command works. The recover button, which brings me to the screen as well. What should I do? PS I have Windows 8 if it's important.

  Worse, he seems to have resolved itself.

• BlackBerry Z10 my BB Z10 does not start after the no shutdown reason cannot go home screan

  Dear expert

  pls help my problem

  My BB Z10 does not start after the no shutdown reason cannot go home screan

  How can I save my data and contact if I reload / back up the operating system how ever my phone cannot start and go home screan

  Thank you...

  Dear expert

  Thanks for your reply, but recognized link bb cant he showed a black berries knowledge so the transferdata button is impossible / cannot click. so I can't back up my files and data if I reloaded the OS. are there\s any idea/way of backing up my files if my phne was frozen?

  Thank you

• Cannot logon after the start because just passing simple / 8.1 Windows logon is not displayed

  It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.

  I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.

  What alternative should I solve the problem?

  Find a possible solution:

  -Press ESC to HP connection icon

  -Choose F11 and follow the instructions to start Windows in safe mode

  You can then use the system restore to solve the problem.

• Mac cannot start after el captain

  Cannot start after updating mac

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

• Satellite M40 - 129 stops starting after the Toshiba screen

  Hello
  My M40 continues sometimes to start after the Toshiba screen. He stops and all I see is the blinking cursor. No Error Message or something else and normal boot from the HARD drive. Boot from CD (for example. Œuvres of Knoppix). This problem sometimes occurs and traceable for me isn´t.

  Best regards
  Spoony

  Hey Spoony

  Unfortunately on this path, it is not easy to say why this is happening. Each user has a specific configuration OS and we don t know how your operating system is configured.

  You can boot OS in safe mode? If Yes check what the problem may be a little. If there is anything you can do I recommend you save all your data and preinstall unit using rescue media. If you do this I recommend also to create two partitions.

  Don t compare WXP and Linux startup procedure. As you know that Knoppix using just the RAM and no HARD drive for the race.

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• space missing after the process of partitioning failed. I lost 500 GB and can not get it back.

  Hi, space on my hard drive disappeared after the process of partitioning failed. I interrupted the process, and after my boot drive lost 500 GB that I wanted to use it to boot camp. Now I can't get it back. Used diskutil resize the volume, but get the error message about the wrong size on cs and advice to make any repair. : Basic storage logical volume supplied has an incorrect size. You must run repair disc-set

  Help, please.

  pavadebo wrote:

  Hi, space on my hard drive disappeared after the process of partitioning failed. I interrupted the process, and after my boot drive lost 500 GB that I wanted to use it to boot camp. Now I can't get it back. Used diskutil resize the volume, but get the error message about the wrong size on cs and advice to make any repair. : Basic storage logical volume supplied has an incorrect size. You must run repair disc-set

  The message is correct. Start Internet recovery (command + Opt + R during startup) and click on utilities-> disk utility, click on the outermost disk and click first aid or repair.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027