Norton said autochk.exe is corrupt

Similar Questions

• boot critical file c:\ntoskrnl.exe is corrupt

  Every time I do windows update and then restart, when it configures updates that does not have the login screen, then on my laptop restarts and goes to startup repair. She does every time after that the update and I think it restore my laptop to a working state, because sometimes my files are missing, although she said that no change will be to your files. I used registry booster and there was problems 226 rate was high. When I had repaired problems I installed service pack 1 manually since it wouldn't do it through windows update. When he was made to install the same thing happens again. The problem was boot critical file c:\ntoskrnl.exe is corrupt. From start of the repair, I looked for booster registry to see if he can repair the file, but for some reason it was not on my laptop.

  "Windows NT did not start... Ntoskrnl.exe error message.
  http://support.Microsoft.com/kb/124550

  http://search.Yahoo.com/search?p=Ntoskrnl.exe+is+corrupt&EI=UTF-8&FR=HP-PVDT

• Trying to opening session c:windows\system32\lfass.exe is corrupt or unreadible error message

  When you try to log on to my DELL Dimension 3100 (Windows XP) I get an error message C:wINDOWS\SYSTEM32\LFASS.exe is corrupt or unreadible. Please run the Chkdsk utility.

  What I'm doing, some items suggest running the recovery disc but these models do not have a disc in standard?

  Any assistance accepted gratfully?

  Thnaks

  Scott

  Hello

  1. are you able to boot into Normal mode after receiving this error message?

  2. the problem occurs in safe mode?

  3 have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to perform disk error checking in Windows XP: http://support.microsoft.com/kb/315265#method2

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Method 2: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  (Try all stages except the upgrade on the spot)

  Hope this information is useful.

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• My Java disappeared and I get an error saying "fx - runtime.exe is corrupt".

  Hello

  Can anyone help me please with Java? I got it on my computer and for some reason, when I saw the update to version 7 of my Java is gone and I'm left with a message saying fx - runtime.exe is corrupted (I didn't go all the way to this) please please help?
  I tried to look around after you follow the path
  thankful to you
  Angie
  original title: Java p-roblem

  It is better for you if you are looking for Java expert advice in Jave community forum:

  Java Help Center:

  http://Java.com/en/download/help/index.XML

• whenever I start my PC security guard windows popping up and tells me runll32.exe is corrupt

  original title: help with rundll32.exe

  whenever I start my PC security guard windows popping up and tells me runll32.exe is corrupt and has won, t let me not do anything just guard telling me that I've been infiltrated with a virus and I try to open all of the files are corrupted. What can I do to stop this?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Vista Ultimate does not start: c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  All of a sudden I started my laptop and Windows does not load.  I received a message "failed to nobulate".  I searched in the help forums and found that I could create a boot CD (because the OS came preinstalled on Dell INspiron 1720 laptop computer).  I tried to perform a Startup Repair 11 times.  The repair details show:

  Boot critical file c:\windows\system32\ntkrnlpa.exe is corrupt failed error code = 0 x 2

  I also tried to visit the advanced repair and selecting to restore from an earlier point in time, but I relieve error that no previous points are detected.

  Help, please!  I '; ve been against a week and need back up and going.  Thank you!

  Sue

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon

  Mick Murphy - Microsoft partner

• Norton said that the component Base filtering in my windows 7 is missing.

  Norton said that the component Base filtering in my windows 7 is missing.

  A restoration will help or you can give me any advice?

  Original title: basic element

  http://community.Norton.com/T5/Norton-360/base-filtering-engine/TD-p/634385

• I get alerts from Norton about "updater.exe". Is Firefox updated itself?

  Recently, I decided to use Firefox instead of IE9, so I am new to how it operates. I noticed that whenever I use it for the first time in a session, I get an alert from Norton to the effect that "updater.exe" has been downloaded and that it is safe and reliable & ch...

  Is this normal? Is - this Firefox updates and apply them? All the virus/malware controls were negative.

  Visit this link

  • http://www.iobit.com/exedll/Norton-update-exe.html

• Ehrecvr.exe.MUI corrupted in windows media center

  The last two days my computer was unable to shut down properly. It will get to the screen that says it stops but then actually turn off and I have to press and hold the power button. I got some tips to scan a full record to see if all the programs were blocking the process of closing, so I tried it and found that I had a corrupted file ehrecvr.exe.mui in Windows Media Center. I am running Windows Vista. Unfortunately, I don't have my original vista windows disc to replace the corrupted by a correct file.

  I'm not sure how to proceed from here. Any advice would be great!

  Hello

  ·         What is the brand and model of the computer?

  ·         What is the complete error message you get?

  I suggest you follow these methods and see if it helps:

  Method 1:

   

  Try the following steps to register some of the important Media Center files and check if it helps.

  (a) click on the start menu, choose run and type cmd and press ENTER.

  (b) execute command regsvr32.exe atl.dll

  (c) run the command %windir%\ehome\ehrecvr.exe /unregServer

  (d) run the command %windir%\ehome\ehsched.exe /unregServer

  (e) run the command %windir%\ehome\ehrecvr.exe/service

  (f) run the command %windir%\ehome\ehsched.exe/service

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3:

  I suggest to perform the clean boot on the computer and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• WinRelauncher.exe - file corrupted

  The file or directory X:\Windows\System32 is damaged and unreadable. Please run the Chkdsk utility. I get the above message on my laptop when it boots, I have windows vista

  Hi DenisJames,

  1. you remember to make changes to the computer before this problem?

  2. are you able to boot into Normal mode?

  WinReLauncher.exe error always occurs when the corresponding WinReLauncher.exe file of the operating system is deleted, corrupted or infected with the virus.

  You can try an advanced boot options startup repair and check if it helps.

  a. restart your computer and keep pressing the F8 key. This will open the screen that says "Advanced Boot Options".

  b. click on 'Repair your computer' and press 'Enter '. Select the keyboard layout and click "next".

  c. type the user name and password and press the OK"" button. This takes you to the menu"System Recovery Options".»

  d. click on "Startup Repair". You need a few options that the system will suggest. During the boot process, your system may need to restart to make the necessary repairs.

  If you are unable to do the repair to start the advanced startup options, and then try to start from the full version of Windows Vista installation disc.

  Check the link for more information:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HELP: chkdsk.exe file corrupted

  I ran a program the other day I was told to run once a week on here to check the virses and after I ran it, I turned off the computer and the next morning, when I turned the computer back on he rode that the chkdsk.exe file is corrupted and then today he rode that one that starts with a j is damaged... and it won't let me download anything to try to fix it so what do I do?

  Have you tried the system restore and repair system recommended in my first post?  If this isn't the case, you should do it.

  SFC is not finished which means that there is serious on your system corruption - if serious program cannot even fill.

  CHKDSK does not work so we can identify or repair damage to the hard drive (and it seems that corruption is the reason why it will not work).

  You cannot download files for diagnosis or repair efforts (have you tried in SafeMode with network start-up and pushing the F8 key repeatedly until you get the menu, and then selecting this option?).  There is a hard drive diagnostic program I want you download and run to test the hard drive.  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.  If necessary, download with another computer and transfer it to computer problem with a flash drive and then install and run it (if you can - if you can not, after return).

  You have a disk for Installation of Windows Vista genuine or only a recovery of the manufacturer of the computer disk (or no disk at all, except perhaps that you could by my instructions to do the Startup Repair and perhaps even restore system - can be done from the disk)?  You have a recovery Partition on your computer with maybe an order of keyboard to activate (and do you know what this command)?  If you do not know the answers to these questions, you can contact your computer manufacturer to get the answers, because it's about the next step in troubleshooting.  If you can get your hands on a real disk Installation of Windows Vista, then that would be great because otherwise, the only option is a clean install, none of us choosing.

  We are running out of options.  It seems to me that you have a problem with bad corruption on your hard drive which is the root cause of all these problems.  It's maybe fixable or you may need to replace the drive.  This is the reason for the above - listed diagnosis program check it out.

  I look forward to your reply.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 2 important messages Virus Protection and Firewall network (important) in the toolbar below. Norton said his race and active, but windows is not see it there.

  After I updated from vista to 7, I noticed this little flag at the bottum of my screen. 2 important messages. Protection against viruses and network firewall. When I flip to Norton, he said that his active and aware? But the Windows Action Center shows that he is not on... Don't understand. Everything else seems to be doing well after the upgrade. I even did the updates (12) after the upgrade...

  Hello

  Rrefer these links:
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Action-Center-check-for-problems

  http://Windows.Microsoft.com/en-us/Windows7/security-checklist-for-Windows-7

  http://Windows.Microsoft.com/en-us/Windows7/what-is-action-center

  It will be useful.

  Steve.

• Norton said that they have updated their toolbar for ff 27 but I can't enable

  Since Firefox updated to version 27 of the Norton Toolbar will not work. I checked and I don't have the latest version of Norton. The Norton site says that they have applied a fix for 27 FF. I have Firefox open and closed several times and restarted my computer several times. What should I do to activate the Norton toolbar?

  My Norton IS 2014.6.5.1 toolbar (Firefox 27.0.1). The toolbar had been there & work but now gone instead shows only as "OPEN BOX". The vault is only providing 1 connection sites & I am unable to choose other accounts/connections of the vault. I ran Live Update several times & rebooted PC (WIN 7 Starter) several times. Have also tried to disable reboot which allows you to restart the Norton Toolbar in Firefox. Nothing helps.
  ETA: So strange. Less than 1 hour later and the toolbar is without any operation of additional troubleshooting.

• I get requests to update Firefox, but Norton said that there is a problem

  I thought that Mozilla Firefox automatically updated itself when it is used. However, I constantly get a white
  Block bottom right of my screen telling me to click it to upgrade to a new version of Firefox.
  When I tried this Norton claims that there is a danger in doing that, so I'll stop.

  You probably downloaded the stub installer that needs to download additional files from the Mozilla server and some security software identifies this version as a threat.

  You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  Download and save the complete Firefox installation program on the desktop and start the installation with a double click on the desktop icon.