Norton Security: install Windows 10 on HP probook 640 g1 with Norton security

Similar Questions

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• Should I install windows 7 64 bit on Ideapad Z460 with 2 GB ram?

  Hello world!

  I use Ideapad Z460. Chipset: Core i3 M380, 2 gig of ram. I use windows 7 x 86 (32 bit). Should I upgrade to the 64 bit version of windows 7? And my computer runs faster after the upgrade?

  Thanks in advance!

  Thanks for your comment!

  Already, I have installed windows 7 64-bit. It works very well. Specifically, I think it's really faster when I install applications. I use as a 4 GB USB DRIVE for readyboost.

• Install windows 7 on a new laptop comes with windows 8 and keep 8

  So I just bought a HP Pavilion g7 that's installed with windows 8. I want to install windows 7 and keep 8 so I don't lose the ability to use 8. short of wiping the HARD drive, how can I install windows 7 next to windows 8 and dual boot?

  Hi mikerob1976,

  I found this post on the forums of Windows which gives details on how to do it. http://goo.GL/zYJTc

  Take a look and let me know if that helps.

• After installing Windows 7, the option to dual boot with my Windows XP already installed is not available.

  PROBLEM TO DUAL BOOT XP AND 7... 1 XP

  I have 4 partition one my h/d. in win xp (S.P 2) c drive is already install. now I install win 7 in d. disc 7 victory is also insal smouthly. but when I restart my computer, startup bual option not shown... only xp boot otometicaly... why?

  EasyBCD to add Windows 7 in the start menu. Note: after you have installed Windows 7, you should have a folder located in the Windows XP partition named C:\Boot (BCD store) that's what Windows 7 and XP boot build to start with. Easy BCD will list each operating system in the BCD store and also allow you to add an additional OS (in your case, Windows 7) and set the default OS after a 30 second delay.
  http://NeoSmart.NET/DL.php?id=1

  J W Stuart: http://www.pagestart.com

• Install Windows XP as a second operating system with Windows 7.

  I am trying to install Windows XP Home Edition on a second internal hard drive with Windows 7 Professional on drive C as my main OS. When I try to install XP, it will start to load up and then I get a blue screen with a message that a problem has been detected and windows has been closed to bottom to provent damage your computer, if it's the first time, restart your computer if this screen appears again, follow these steps. Check to see you have enough disk space, if the pilot is identified, disable drivers or updated drivers or try to change video cards. Check with the hardware vendor for any BIOS updates. ect. I have monofamille this computer about 6 months ago, which has a mother Intel DX58SO with the I7 processor, WD VelociRaptor 150 GB Sata Hard Drive, Seagate Barracuda 500 GB SATA HDD, 6 GB Corsair Dominator memory cards, MS Wireless 6000, EVGA GeForce GTX 260 video card keyboard/5000 mouse, Lite-On DL Sata burner DVD and a Samsung LCD screen. Could someone give me a solution to install Windows XP as a second operating system on the second hard drive.

  Hello

  Why not use Xpmode with Virtual PC, both are free. (You will have to use XP 32-bit SP3.)

  Make sure you that have enabled in bios first virtualization.

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Slan go foill, Paul

• Install Windows 7 on the new hard drive with USB operating system recovery?

  I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

  While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

  So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

  TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

  The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

• Re-install Windows 7 from Dell reinstallation DVD fails with "cannot configure Windows for your hardware.

  I have to do a ground up to Windows 7, re - install media re-installing Win7 provided, due to the failure of the hard drive (so no available recovery partition).  The machine is a XPS 9000 (circa 2010).   The first phase (partitioning, file copy and extraction) works very well.  However, when I restart in Windows for the first time since the hard drive, I get a message that Windows install can not configure Windows to my hardware.  The only option is to recognize and to restart (which gives the same message).  Subsequent reboots just to say that the Windows installation cannot be completed and restart to install Windows.

  Clues to this topic?  I have no new hardware in the machine which would be incompatible with this disc to re - install (admittedly old and probably non - SP1).  I wonder if the drive is missing in fact support that they put in the installation image factory.  My next step is to get a Dutch Win 7 installation disc (probably with SP1) to see if it works.  Other thoughts?

  Belarc Advisor only gives you the product key of the registry which, for installation OEM Dell will be a SLP key. This will be different from the key on the COA and can be activated manually by entering it during installation.

  The key on the certificate of authenticity can be introduced during the installation and this activation requires a call to Microsoft.

  Key/OEM SLP activation can be applied to a retail facility without a product key by using the program and cert ABR files which I saved for installs with the Dell reinstallation DVD:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Microsoft-product-activation/the-activation-backup-and-recovery-program-Windows-Vista-7-version/

  Although Windows view (s) and begins to install it on the hard drive, it could be an art of hiccups the end with the HDD and loading SATA drivers can always solve this problem.

• Is it possible to install Windows 7 on my PC that came with Windows 10?

  Original title: version of Windows 7

  Hi, is it possible to install Windows 7 on my PC? I already have Windows 10 but the thing is, I'm updating, I bought my PC pre-installed with Windows 10. Given that I have not upgraded, I can't downgrade. Is it possible to install Windows 7 on my PC without having to buy new? I've already paid for Windows 10 and the reason why I want to go back because 10 Windows is so buggy. I know not to download the ISO of Windows 7 images, but my product key does not work with it. Or y at - it a way to transfer windows 7 from my laptop to my desktop Windows 10? Please help and have a nice day!

  Option 1:

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  Option 2:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  In both cases, you will need to provide your own license.

• Try to install windows 7, the process stops at 98% with the error 0x8007045D code in a file dialog box

  I'm building a new computer. Motherboard Intel DZ77BH - 55K, Intel i7 - 3770S. I load files terabyte disk WD Caviar, 16 GB Coarsaur vengeance DDR3 1600 RAM, Windows 7, but hangs up on their expense. What should I do to complete the installation of Windows 7?

  Hi Larry Hamerman,.

  Thank you for writing to Microsoft Communities. I understand that you are unable to install the Windows 7 operating system on the computer.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. you try to perform a clean installation or upgrade?

  2. What is the full error message do you get?

  3. from device you are trying to install?

  Make sure that the Windows 7 disc is clean and Unscratched exist. Unplug all external/USB devices before installing.

  If you try to upgrade Windows Vista to Windows 7 operating system, then I suggest you to run Windows 7 Upgrade Advisor.

  Windows 7 Upgrade Advisor: http://windows.microsoft.com/en-US/windows/downloads/upgrade-advisor

  What is a Windows 7 upgrade compatibility report, and what the results mean?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-Windows-7-upgrade-compatibility-report-and-what-do-the-results-mean

  Note: The hard disk must have at least 3 GB of free space on the disk for the Windows 7 installation files. The hard disk must have at least 16 GB of additional disk space to install Windows 7. For more information about system requirements for Windows 7, see the Microsoft Web site at the following address:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  For your reference: Windows 7 installation problems: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-7-installation-problems-frequently-asked-questions

  Installation of Windows 7: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Installing-Windows-7-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• Install Windows 8 on a partition fresh bootcamp with license but not DVD

  If my hard drive MBPro renounced me, and I replaced it with an SSD. The old drive was a Bootcamp partition with a legal license of Windows 8 Pro (I guess that 64-bit), I updated to a version of Windows 7 DVD online. Now, I want my rear windows. My DVD player given me another year, so there first installation that Win7 is not an option. [Insert joke Apple here.] No idea how I can legally re - install Windows 8.0 or 8.1 my bootcamp partition? I think I need a .iso to install on a USB drive throughout OSX.

  Thank you

  WARNING:

  To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8.

  Aside from that, if you must. ISO for Windows 8, you will need to download it to a Windows-based PC using the upgrade wizard, the computer must be running Windows Vista or Windows 7/8/8.1

  http://techingiteasy.WordPress.com/2013/02/14/how-to-obtain-64-bit-Installer-and-create-install-media-for-Windows-8/

  Another option is to download the trial of 90 days of Windows Enterprise 8.1, which is provided as one. ISO file and install it in Boot Camp and use it to facilitate the download of the. ISO for Windows 8, which then allows you to do a clean install on the Windows Enterprise 8.1 90 day trial.

  http://TechNet.Microsoft.com/en-us/evalcenter/hh699156.aspx

  Resources:

  http://arstechnica.com/information-technology/2012/11/no-support-no-problem-installing-Windows-8-on-a-Mac-with-boot-camp/

• Hard disk formatted, freshly installed Windows 8, but it does not work with the old key

  I had bought a Lenovo Z570 two years back, with Original Windows 7 Home Premium.

  When Windows 8 released in November 2012, I had bought and upgraded online for her.

  I had used the Windows 8 since then. Yesterday, due to various problems, I had to format my hard drive, and when I finally managed to install Windows 8 on my laptop again, it does not allow me to activate windows 8 using my normal key (he says that this key did not work)

  It was the key in the email from the seller, and I have an e-mail, which has a Bill to prove.
  I guess this could be due to the PC 1 by purchase clause, however, it's the same PC (more like laptop). So I do not understand why I would not be allowed to activate the software I used earlier on the same laptop still on the same laptop after installing it.

  Please get to me as soon as possible if there is a solution.

  Thanks in advance.

  Hey! Thanks for your help, but I had refreshed my windows 8 in the meantime and connected to the internet after that. and then when I followed your instructions and run slui.exe, it says that windows is activated. so I guess that the problem is solved.

• Install Windows 10 days not enough disk space with 9

  Hello

  As a fan of Firefox, I got my XP Pro machine die. New construction with Windows 10 creates a volume of questions that it is difficult to take.

  In need of a mail client, move from Outlook Express, I decided on Thunderbird. When I try to install it in a location of my choice on one partition other then C:, it says 9 GB of free space, which need 80 MB and told there is not enough space.

  Can you help me?

  Well well, OK then, I answer my own question:

  It was a very simple solution. Get the current version (which is in my case 38.2,0 - while I got the error with 38.1.0 that I had gotten a few days earlier, I think). Works like a dream.

  And look so cool (white).

  And in the case where you need help: click on top bar somewhere, ask to customize, and then find the calendar icon. Drag it to the top and voila, all of a sudden you also schedule above tab.

  Everything just great, thank you, Peter

• XP Pro ~ not connect to the internet and try to install Windows 8, CD player does not work with discs of 32 or 64.

  I have Windows XP Professional as the operating system.

  The computer used to be connected to our network of offices. My wife brought her home computer, and to my knowledge because the computer was not connected to this network for several months, there is a security problem that will not allow it to connect to the internet. To connect to the router, it will not provide access to the internet.
  The computer sat for several months, as it was useless to do not be able to connect to the internet.
  We bought Windows 8 as a solution to overcome this problem we are not computer scientists.
  We strive to use the disc drive is a Sony CD - RW disc. It works fine with any disc in there BUT NOT disks of 32 or 64-bit.
  The disc of going just in and nothing else, I can load it, cannot Explorer, nothing. It's like nothing is there.
  Any help would be huge, 1) either you connect back or 2) get the installation to work.
  I wanted to make a clear 100% boot, but I do know and am confused about ISO / ZIP bootdisk stuff with no internet connect.

  Hi Chris_556,

  I suggest you to refer to the help article and check if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For you reference:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Can not install Windows 8.1 store as it fails with the error message "fails to install.

  Original title: Surface Pro Windows 8.1 update slice pro

  Hey guys can someone answer my question:

  I have update problems to Windows 8.1 pro it say fails to install I am downloading form the app store of windows 8?

  Someone know the answer

  Hey sorry for not responding for a while. I found the problem, it was the language and the country usa.  It was changed to nz and the update worked.