NOT A VALID ADDRESS

Similar Questions

• Am200 refuses a valid local (public) ip address (local ip address is not a valid address)

  Hi there, having some problems with my current ADSL line and planned on the secondary use of the am200 as a dsl modem to check if she behaves better under the adsl2 +.  But when I go to enter the desired local IP (94.30.x.x), subnet mask (255.255.255.248) turn off the dhcp server and click ok, I gives me the error 'local IP address is not a valid address' and unable to continue.  He of course will allow me to use private IP addresses, but this modem will not connect to my firewall/web server (i.e. 94.30.x.x + 1) I like the modem to be an imaginary ip address, but a real, routed.

  Before making a request for official support of linksys (now cisco), I thought I would check to see if someone has a possible solution.  I've just updated firmware for 1.19.02 and it still gives the same error.

  Thank you.

  Please delete this thread, using another firmware, I was able to select a real IP address.  I hope that linksys (cisco) will be realease an official firmware to solve this problem, but in the meantime, thanks for the work Geremia!

• sbconsole: throw javax.servlet.ServletException: < host >: < port > is not a valid address

  Hi all

  I did a new install of Weblogic 12.2.1 with BPM Suite 12.2.1, Portal Webcenter 12.2.1 and OSB 12.2.1 products. I configured a domain with an admin server and managed server three for each product, i.e. a BPM, one for the BSO and that for Webcenter with jdk made reference to all current jdk1.8.0_65 to run in the same machine.

  Everything works fine except that every time I try to meet the BSO console (sbconsole) url - http://< admin-server-hostname >: < port > / sbconsole

  It throws an error 500 with the newspaper below:

  < 4 December 2015 12:18:37 IST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" in the module "Module-FMWDFW" with severity "Notice" on the server "AdminServer" released December 4, 2015 12:18:37 IST. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  WatchData: MESSAGE = [path specification: null ServletContext@378433619[app:service-bus module: sbconsole-version: 3.1], request: [weblogic.servlet.internal.ServletRequestImpl@4c6c2f09

  GET /sbconsole HTTP/1.1

  Connection: keep-alive

  Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8

  Upgrade-insecurity-requests: 1

  User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/46.0.2490.86

  Accept-Encoding: gzip, deflate, sdch

  Accept-Language: en-US, en; q = 0.8

  Root cause]] of ServletException.

  javax.servlet.ServletException: 192.168.1.131:7101 is not a valid address

  at oracle.soa.sb.console.servlets.SBConsoleRedirectServlet.doPost(SBConsoleRedirectServlet.java:91)

  at oracle.soa.sb.console.servlets.SBConsoleRedirectServlet.doGet(SBConsoleRedirectServlet.java:38)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:687)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:286)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:260)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:137)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:350)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:141)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:649)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:124)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:232)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:94)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:224)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:78)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3654)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3620)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:326)

  at weblogic.security.service.SecurityManager.runAsForUserCode(SecurityManager.java:196)

  at weblogic.servlet.provider.WlsSecurityProvider.runAsForUserCode(WlsSecurityProvider.java:203)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:71)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2423)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2280)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2258)

  at weblogic.servlet.internal.ServletRequestImpl.runInternal(ServletRequestImpl.java:1626)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1586)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:270)

  at weblogic.invocation.ComponentInvocationContextManager._runAs(ComponentInvocationContextManager.java:348)

  at weblogic.invocation.ComponentInvocationContextManager.runAs(ComponentInvocationContextManager.java:333)

  at weblogic.work.LivePartitionUtility.doRunWorkUnderContext(LivePartitionUtility.java:54)

  at weblogic.work.PartitionUtility.runWorkUnderContext(PartitionUtility.java:41)

  at weblogic.work.SelfTuningWorkManagerImpl.runWorkUnderContext(SelfTuningWorkManagerImpl.java:617)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:397)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:346)

  But when I access sbconsole url by using the url ( http://localhost:7101 / sbconsole ) of the machine running the administration server, the sboconsole opens perfectly.

  
  

  I am not able to understand what could go wrong?
  

  
  

  Thank you!
  

  Kind regards

  Nishant.
  

  Hi Nishant,

  Looks like your instance of weblogic admin area got the address look settled at "localhost". Remove the "localhost" address of the listening and then restart your instance of admin.

  Login to the Admin console-> servers-> Admin-> General-> address listening server.

  Hope you may now be able to connect on sbconsole using localhost and the IP address. It will be useful.

• I tried to respond to an email from tech support and he said that it was not a valid address

  my computer model is a dv8t-1000

  Hard to tell unless you post the address of problem in the form supportDOTsomethingATdomainDOTcom. I suspect it's a fraudulent email, especially if it was not requested. Are you lucky that accused had failed!

• F &amp; G Committee &lt; ' F &amp; G Committee' &gt; is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

  Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?

  Read this.
  https://support.Mozilla.org/en-us/questions/1019019

• How to fix: after upgrade to 31.1, using the list of group name does not, gives the messages this name "is not a valid email address."

  Before the upgrade, I often type in the group alias in the address box, and fills the name of the group. But now when I try to send the message, I get an error that the name that appears "is not a valid email address" and then details how to train the appropriate addresses.

  I deleted the list of my address book personal and recreated to address in my CAP, but the error persists. I have to manually add individual addresses.

  I tried selecting the group from the list in the Contacts pane instead of typing the alias, no change.

  I'm doing something wrong?

  -Mike

  I have new information on this subject.

  It looks like this bug. If you have a Bugzilla account, it would be useful to vote for this issue.

  It seems that lists with a description that includes several words have this problem. The bug report suggests to replace whites "" between the words in the descriptions of these lists with an underscore "_".

  If you don't want to change your descriptions, the other workaround provided still works.

• Inscription: How could it be pretty darn difficult. The site says: "your email address could not be validated; "Make sure your email is correct and click on register below. I have never validated. S, I register without the possibility to validate. What th

  I tried to register with support, but:
  "Your email address could not be validated; Make sure your email is correct and click on register below. »
  Action: I did.
  Answer: The same. How the H box you confirm if this was not possible.

  This has happened

  Don't know how many times

  is now

  Sign up here and you should be sent a link to the email you provided. If you have not provided an email address valid or an email that has not been used to create a.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• Help! Could not resolve the address of the server: the requested name is valid, but no data of the requested type was found.

  Hello

  So I started with a Horizon view, so I apologize if this is a noob question. I wanted to try to put a security server in our DMZ, but before I put it in the DMZ I wanted to test whether customers would be on our network. So here's my setup:

  Overview of VMware View Administrator 5.3.2 generation-188719

  Same version for security server.

  Windows Firewall is activated 'On' on all profiles on security and the server connection. (this might be important later)

  Laptop with Horizon installed Client, Version 3.2.0 build-2331566

  IPad Air2 with Horizon Client Version 3.2.0 build-2331566

  On the Administrator display > display Configuration > Security servers > change on the Security Server

  I PCoIP Secure Gateway set to the IP address of the Security Server (say its 192.168.1.10:4172)

  Connection servers > edit on the login server

  I also have the Security server defined as PCoIP Secure Gateway (192.168.1.10:4172)

  Yet once I wanted to test it before I put it in the DMZ

  So when I connect with the iPad, it works fine, I can connect, see all my connections and connect to just fine.

  On the laptop, when I try to connect, I get the login screen where I put my user name and password (correctly, I might add ) and when I try and I get a connection error.

  "Error: could not resolve the address of the server: the requested name is valid, but no data of the requested type was found."

  I found the article KB VMware goes around the question: KB 2085365 (without help)

  I changed the Secure Gateway on both safety and the connection to the server at each IP I can think of, but it still does not work.

  Can someone give me an idea what can be wrong?

  What is my firewall to connect to the server? (I don't remember if I had turned on firewalls when I installed the login server while they could not properly configured summer when I install?)

  Any help would be amazing!

  Thanks for reading!

  I found the problem, it turns out that the network port to the Security server has been set for public and not private in the firewall. Thanks for the help!

• I use home to get on the net and there dncp but I get an error not a valid ip address

  I have through my husbands computer network and there srt dhcp upward on his we have a special, but I can't get my computer to connect to the internet through its it is not a valid IP tried everything

  Hi Sallie,
  Follow step 1 in this guide: http://www.selectrealsecurity.com/fix-internet-connection
  If you have any questions, just ask. Let me know if this helps you.
  Brian

• WiFi is not a valid ip address, complete solutions, but question configuration is not fixed

  I have recently moved into a new place and have problems connecting to the new wifi. Troubleshooting reports "wifi is not a valid IP configuration." He asked me to reset the wifi adapter, obtain new TCP/IP settings for the wifi card and investigating problems of router or modem. I have completed these tasks, but the issue is still not fixed. What should I do?

  Please download this app (minitoolbox)
  Run it with 'select all' checked
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• MSIMN.exe.image is not a valid windows image

  I think I have a virus problem or a worm.  Whenever I start the computer, everything fine until I try to enter my password to connect.  I get a popup with: a big red X in the upper corner and a message similar to "the application of the dll c:\windows\system32\futunide.dll is not a valid windows image.  I can click ok and it goes away but comes right off.  It will disappear after a few clicks, and then when I sign and try to go to another program he keeps send me windows pop up but with carrying messages, like "MSIMN.exe.image is not a valid windows image file.  "or" firefox.exe.image is not a valid windows image file.  I ca keep closing popups and eventually get on the internet.  Once on the internet popups leave while I am browsing.  I don't know if this is due to the blocking of popup windows or not.  I tried to restore the computer to an earlier date, but he has failed everytime I tried, with the message "restore was not complete, your computer could not be restored to the 01/11/2011", or whatever the date, I tried.  I tried to find these popups and error messages nothing helps.  I use free avg as an antivirus and it cand find any infection when I do a scan.  I have malwarebytes on my computer, but when I run it, I can't update the last definition file.  I t gives me an error.  When I run it as it is that there is no infection.  Also, I googled the 'futunide.dll' nothing works.

  If anyone knows or suspects the proplem is I'd really appreciate the help.

  Thank you.

  Jim Humphreys

  E-mail address is removed from the privacy *.

  Thank you L_C_S:

  Thanks for the quick reply, I appreciate it.

  I got it.  First I did a complete scan for malware and remove a Trojan horse. Upon restart, the popup is back.  I found the futunide.dll in msconfig/startup and in the system32 folder.  I could not find any link to anythimg for this dll.  I have internet google and several windows windows including etc. forums support and could not even get an identification or even a success on it.  I have renamed in the system32 folder and disabled in the commissioning.  I have not rebooted the machine and 'Wala' no popup more and everything seems to work perfectly.

  Still, I would like to know the origin of the futunide.dll, and therefore totally unknown I can't finde out.

  JimH

• Error when you click icon: the application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image.

  Not a Windows image is valid. Help!

  At the start of my PC, and whenever I click on any icon I get the error message:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  At the start there are several, each with a file name of a program in the blue bar, i.e. "firefy.exe - bad Image" followed by the above statement. After you click the only option, 'OK', the system works well, but the message will continue to re appear after clicking on any icon on the desktop or the start menu.

  I need help with the removal of this question. I have not installed or run new programme before the start of last week. Thank you.

  3/15 - installed, updated and ran Ccleaner and Malwarebytes. Restart the pc after a successful run of each. Same question:
  The application or DLL C:\Windows\System32\ccfgnt32.dll is not a valid Windows image. Please check the Setup disk.
  Help please. Thanks in advance.

  CRR
  E-mail address is removed from the privacy *.

  Hello RRC633,

  I suggest that see you if you have corrupted system files.

  Click Start
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files. It may take some time to run.

  Reboot your system.

  The KB Article ID: 310747 - Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  If that comes back without any problems of integrity, then I would check the event viewer for errors in the application or system event logs.

  The KB Article ID: 308427 - how to view and manage the event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Please answer back with an update.

  Marilyn

• error code while trying to open the photos include JPEG and BMP files: C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!

  If you open a directory of photos and go to the thumbnail view in Explorer, they display the thumbnails correctly?
   
  I think that you need to reset the file association for programs that open the image files.  Try a right-click on a jpeg file and go to properties and click on the button to edit, and then designate PS elements 8 as the top program open with, and then see if it works very well.
   
  You can also check the settings in the registry for the types of image files.  Seewww.oehelp.com/noimg.aspx , which deals with a related issue.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I withdrew just a very good old scanner which apparently couldn't handle the recent installation of Windows XP Service Pack 2 or 3, and went with a rather nice Epson V330 Photo.   I uninstalled all old software, want my images to JPEG and BMP to open in Adobe PhotoShop Elements 8 for editing and development.  It is my job and my hobby and means of photography technique.  I reinstalled the scanner by removing the Arcsoft software with which it has been furnished, which is not really suitable for what I do.

  Now, I can not open JPEG in PhotoShop Elements 8.0 and here I get the error message:

  C:\Documents and Settings\Jim\My Documents\My Pictures\img005.jpg is not a valid Win32 application

  It seems to have something to do with the hack with the folder options after that I spilled the Arcsoft as any kind of primary program.

  BUT I have to open JPEG files, and it MUST be in PhotoShop Elements 8, I bought.  I can see, overview and could open to the limited capacity of some of the ArcSoft stuff, but I'm not interested in distance using that.

  How can I get these files/folders to open in something useful?  I was able to create JPEG on the new scanner, but now my computer opens not those or 'old' of my files.   See the warning message.

  I'm trying to uninstall all the software now and do not reinstall the stuff of Arcsoft, which would not be useful for me in any setting.   But I do not think that this will be the solution, as my computer can not open these key files in PhotoShop Elements 8.0.

  I think it's something I did during the passage, but I did system restore and NO RESULT.  NONE!