Not able to restore the childs in latest changes

Similar Questions

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Someone can help me when closed Firefox randomly it deletes all cookies and cache, and I'm not able to restore the lost tabs...?

  For some time now, Firefox stopped randomly for unknown reasons. Sometimes, windows reports the error, but not always. When I launch Firefox upward once again, it does not restore my tabs. Also as a bonus, it deletes the cookies and cache, and I don't know why. In addition, this event became more frequent. Just in the last hour along before writing this complaint, Firefox crashed three times that I have change user, but not every time I went. I'm a taboholic, addicted to the tabs, sometimes 70 +, and it's the final straw. This frequency became more important a few days ago. When it crashed first, Windows has had enough let me know the error first one or two weeks ago. It has become the scourge of my internet browsing very. Someone please help, or I have to renounce my allegiance to Firefox and switch to the dark side which is Crome.

  ... or I have to renounce my allegiance to Firefox...

  There is no oath of citizenship involved by the use of Firefox, it's a piece of software.

  Look, if Firefox is not generate incident reports, more likely to have an operating system or a hardware problem. If Firefox generates incident reports, you can retrieve this information and display numbers report here.

  https://support.Mozilla.com/en-us/KB/Firefox+crashes#Getting_the_most_accurate_help_with_your_Firefox_crash

  Type of Subject: hangs in the URL bar and press ENTER.
  Click on the hyperlinks to display the pages of the Crash report and copy' only paste the URL of each of these reports in the message here box. Let's see if we can help figure you out what is causing those who fails to happen.

• Not able to restore the entire video.

  This happened to me before, and I had to abandoned the other projects because I couldn't find answers to this.

  Problem:

  When I go to restore, it will make the first two clips and music, but when it gets to the main part of editing the video, he refuses to return. I can't find the error he gave me, but it was something you need 2 or more images to display, so that an error saying something about my publication size and too big or too small. I followed the tutorials, but nothing works for me. I will provide you the screenshot to show my problem.

  

  The red line is where it stops to make.

  Without any error message or of a more complete description of your workflow and your computer you'll first of all your model of troubleshooting. Here is how to do this.

  The first thing we do is to select all the layers that extend on the timeline when the rendering fails. It seems to me like the solid black and the two adjustment are the only layers that are active when the computer breaks down. With these selected layers, press U twice to reveal all the modified properties of the layers. It seems that you have Magic Bullet Looks applied for the adjustment layer that has a few properties revealed. There must be something inside your comp or something I do not understand is happening with the solid black. You didn't do a very good job to label your timeline so anyone can understand what is happening.

  When you have all changed properties revealed try setting your workspace to begin just before it fails and then end just seconds after these layers of problem start and run a test rendering using just the work area if you get another failure and then start to turn off the effects or reset the properties one by one until you find what is the cause of the problem and then report. It could be anything.

  If you do not get a failure of rendering with the shortened work area, and then something happens in the first part of the timeline that is gobbling up your memory. You will find the changed each layer properties and start turning things at once to find out what is happening.

  Yet one thing and this should have been my first comment. Make sure that the AE and all your belongings are up-to-date.

• error of Tivoli storage manager... not able to restore the file using rman

  Hi all
  
  I have one using AIX 64-bit os and oracle database 10g LF. I also use BR * tools and Tivoli Storage Manager for backup and storage. During the restore operation, I'm more error.file not restored to the Library Manager server...
  
  
  
  ERROR:
  Interface between BR * tools and Tivoli Storage Manager
  -Version 5, exit 4, change 0.1 for AIX 64-bit LF -.
  Version: 304B updated January 15, 2007
  (c) Copyright IBM Corporation, 1996, 2007, all rights reserved.
  
  BKI2027I: TSM-API version 5.4.0.0 using (compiled with 5.3.0.0).
  BKI2000I: Connected to the ProLE on port tdpr3ora64.
  BKI0005I: Start of the program at: Thu Dec 20 14:05:31 PAKST 2011.
  
  
  -Settings-
  Input file: / tmp/eaaBLimie
  Profile: /oracle/PEP/102_64/dbs/initPEP.utl
  File: /oracle/PEP/102_64/dbs/initPEP.bki
  Manual sorting file: disabled
  Trace file: disabled
  TraceFlags: disabled
  Parallel sessions: 2
  Multiplexing of files: disabled
  Compression of RL: disabled
  Output error: disabled
  LOT: disabled
  Buffer size: 131072
  Mode copy buffer: SIMPLE
  Redologcopies: disabled
  Release management: disabled
  Backup type: unknown
  Logs TSM server: disabled
  TSM server: 192.168.100.147:PPLTSMSRV with 2 sessions configured
  The TSM client node: PEPSRV01
  For the backup days: Mon Mar sea game Fri Sat Sun
  Backup mgmt class: MDB
  Class mgmt Archiv: MLOG1 MLOG2
  
  
  BKI5016I: Time: 20/12/11 14:05:42 new TSM session created: MGMNT CLASS:, TSM-Server: 192.168.100.147:PPLTSMSRV, type: SIMPLE
  BKI0027I: Time: 20/12/11 14:05:47 subject: 1 current 1: /oracle/PEP/sapbackup/behjszif.aff size: 67,991 KB, MGMNT-CLASS: MDB, TSM-server: 192.168.100.147:PPLTSMSRV.
  BKI0101I: Please enter 'c [have]' to continue or [high] "to cancel.
  s
  BKI0102I: Your answer: of '.
  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  * (RC = 14). *
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.
  
  #ERROR /oracle/PEP/sapbackup/behjszif.aff
  BKI1215I: Average transmission speed was 0.000 (0.000 MB/sec) GB/HR.
  BKI0020I: End of program: Thu Dec 20 14:07:27 PAKST 2011.
  BKI0021I: Duration: 01 min 56 sec.
  BKI0024I: Returns the code is: 2.
  BKI0024I: Returns the code is: 2.
  Press ENTER to continue...
  
  
  
  I am bit confused which... Why this error coming... for no matter what eror (RMAN) database... or due to an error of tivoli. Help, please...
  
  Published by: dbaforu on December 21, 2011 12:22

  Read the error message carefully
  especially the first line

  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  (rc = 14).
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.

  Not an Oracle error. IBM also has support forums.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Not able to restore the backup of the files.

  Original title: windows vista backup and restore

  When I did a recent windows backup on the backup windows and restore on my windows vista-based computer, it completed the backup without problem. But when I open several of these files, they show a zip file and when I open these zip files open on the windows photo gallery.

  It never happened to me before. All previous backup files were normal backup files.

  my previous posting of this question, certain we tried to help me with this problem. I tried what they suggested, but the problem is still there. Could someone help me with this problem to why this is still happening. As I have said that I have no problem making a backup to backup and restore windows, now the new backup file is a zip file and try to open up on top of the windows photo gallery

  Thank you

  I discovered that I had a number of virus on my computer. has taken my computer repair and solved my problem to backup windows.

• Not able to restore iphone6 due to error code "latest version of itunes is not installed", however the latest version of itunes is installed.

  Not able to restore the iphone 6 due to the error "latest version of itunes is not installed", however itunes version 11.4 is installed.

  11.4 is not the latest version of iTunes.

  12.4.3 is the latest version of iTunes.

  It requires Windows 7 or later or OS X 10.8.5 or higher.

• Not able to access the parent instance variable in outside of the methods in child

  Hello
  
  I don't get why I am not able to access the instance variable parent class apart from the example of the child class methods.
  

  class Parent
  {
       int a;
  }
  
  class Child extends Parent
  {
       a = 1; // Here i am getting a compilation error that Syntax error on token "a", VariableDeclaratorId expected after this token
       
       void someMethod()
       {
            a = 1;  // Here i am not getting any compilation error while accessing parent class variable
       }
  }

  Can someone let me know the exact reason for this, and what about the talks of error?
  
  Thank you
  Uday
  
  Published by: Udaya Shankara Gandhi on June 13, 2012 03:30

  You can only put assignments or expressions inside the methods, of the builders or the initializors class, or when you declare a variable.
  It has nothing to the child which stretches from Parent.

  class Parent {
      int a = 1;
  
      { a = 1; }
  
      public Parent() {
          a = 1;
      }
  
     public void method() {
         a = 1;
     }
  }
  

• Mini Mac does not connect to restore the iPad 2

  I work in a public library, and we have several iPad 2s who lend us out for our guests to use. Between each user, restore us the iPad to factory default with a mac mini, then reinstall our applications from the iTunes backup. Since we have upgraded to iOS 9.2 a month ago, we had trouble getting the restore process of working part. When we try, we get this error message: "there was a problem downloading the software for the iPad. The requested resource is not found. »

  The mini connects to iTunes and can surf the web without any problem, we do not have any anti-virus installed on it, and we tried to connect via our LAN and WiFi. We have the latest version of iTunes and the latest iOS on the mini. We rebooted the mini many times. I checked the file hosts, in accordance with the instructions from apple, and apparently is not the issue. I am able to restore the iPad on a Windows PC and then move them to the mini to apply the settings of our saved backup, so I think the problem is with the mini itself, although it now occupies about 3 times more time to reinstall the applications as before.

  We've been ready ipads in recent years without any major problems and have made no changes to the default settings of the mini otherwise to update the iOS. Restore the iPad is the only thing we use the mini for. I would appreciate any advice.

  What OSX version and what version of iTunes?

  You say Mac mini Mac OS X (10.7.5)

  The last OSX is 10.11.2 and iOS 9.2 requires at least 10.8.5 to get the required iTunes version

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• "Firefox is not able to display the toolbar. Reinstall the toolbar"how to re - install Toolbar?

  Up above Google on the toolbar, it says "Firefox is not able to display the toolbar. Reinstall the toolbar"I do not know how

  == I have installed the latest version of Firefox now and restarted my computer

  You don't say which toolbar, but if need be "re-installed", this means that it is not part of Firefox, but an add-on. So I guess that you are referring to the Google toolbar. In this case, you will need to go to the page of the Google toolbar and install it from there.
  http://www.Google.com/toolbar/FF/index.html

  If you did not originally install it yourself, then my guess is that you're somewhere other than Mozilla Firefox. In the future, make sure you download Firefox from the Mozilla site. www.Mozilla.com

• SECURITY UPDATE for SQL SERVER 2005 SERVICE PAK (KB970892) FAILURE CODE 7358__I am not able to complete the update above.

  UPDATE OF SECURITY FOR SQL SERVER 2005 SERVICE PAK (KB970892) HAS NO CODE 7358
  WINDOWS _00007358 WINDOWS UPDATE _dt000 UPDATE

  I'm not able to finish the update above.  When I try to turn off my cell phone, that the process is delayed because the computer tries to update and it is frustrating to wait the update complete error 7358.

  Can it be fixed or can I delte this update to stop the delay to stop him?

  See the section "How to get help" of http://support.microsoft.com/kb/970892

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Security customer includes home links page free security update support, too
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• I'm not able to access the help and support on my xp based computer.

  I have Windows XP Home Edition. I deleted some old programs using Add / Remove button in the control settings.  Also installed an antivirus program.  I noticed that the I help support button is unresponsive and I'm not able to access the system restore.  How can I solve this problem?

  Hello

  1. have you made changes on the computer recently?
  2. what happens when you run the system restore?

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry