Not able to update IE8 too 11 IE in windows 7 64 bit

Unable to upgrade IE8 to 11 IE in windows 7 64-bit OS

Hello

Please contact Microsoft Community.

I understand that you are faced with the question on the update of Internet Explorer.

I will definitely help you with this.

I suggest you go through the links below:

Method 1: Run Windows update convenience store

Here is the link for the execution of a troubleshooting Windows Update tool:

http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

Method 2: Reset the Windows Update components

Here is a link to reset the Windows update components:

http://support.Microsoft.com/kb/971058/en-us

Method 3: Run system update tool

Here is the link to download the system update tool:

http://support.Microsoft.com/kb/947821/en-us

Note: Check if your system is 32-bit or 64-bit and download accordingly.

To find out, right click on computer and click on Properties.

System Properties page will show you the configuration of the system.

If this does not work, follow the next method.

Method 4: Run System File Checker tool

Here is the link to execute:

http://support.microsoft.com/kb/929833.

If the above given steps also did not help, then try to disable the antivirus (Mcaffee) and try to manually install Internet Explorer 11.

Here is the link for the download of Internet Explorer 11.

hthttp://Windows.Microsoft.com/en-us/Internet-Explorer/IE-11-worldwide-languages

Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

Still, if you face any problem, try to uninstall all updates of Internet Explorer 9 from Windows Update.

This link will show you how to uninstall an update:

http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

Even if the problem persists, follow the steps below:

In order to uninstall Internet Explorer 11 follow the steps mentioned below:

1. open administrator command prompt.

2 copy and paste below command and press ENTER.

FORFILES /P Microsoft-Windows - IE - %WINDIR%\servicing\Packages/m * 9. * .mum /c "cmd /c echo uninstalling @fname package & start /w pkgmgr /up:@fname /norestart.

Now, try to manually install IE11:

http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-11-worldwide-languages

See also the link given: http://support.microsoft.com/kb/2872074/en-us

Try the above steps and let us know the results.

We will be happy to help you.

Tags: Windows

Similar Questions

not able to update, it says: error WindowsUpdate_8024402f please help

not able to update, it says: error WindowsUpdate_8024402f please help

http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80244016-8024402f-or-c80003fa>

UTC/GMT is 17:37 on Sunday, May 13, 2012

Not able to update the drivers

I'm not able to update my drivers for hp support assistant-maintain-refresh, my warranty has expired there is nothing to do with it.i can't seem to connect to the servers of hp but download the updates

Connecting to the servers of Hp-Pass

Download of updates in case of failure

Collection of information in the event of failure

ANI system in case of failure

Preparation action list-Pass

Could someone help me...

Try to download the latest version of the wizard help here: http://goo.gl/yQ5DJ

If this does not work, you can go to this link http://goo.gl/PIzE4 and select your operating system and then manually download drivers and other updates that you may need.

Please let me know if it helps.

I forgot to package ID, not able to update the app World! Help, please

Hi guys,.

As the title says, I forgot the package ID, and I'm not able to update the app World! whenever I submit a press release I get an error indicating that the package what ID does not match. Please suggest me what I can do? How to find the package id? Thank you very much. See you soon.

Goto the BB forum and ask the question. BB has the ability for you to create a new token of dev and map it to the original. I had to do this recently. MShom was the one who did it for me.

I'm not able to update my credit card. Change the payment does not appear next to my plan for

I'm not able to update my credit card. Change the payment does not appear next to my plan for

A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

-Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

repately not able to update the update CS5 illustrator, also FW and FL. Any ideas?

repately not able to update the update CS5 illustrator, also FW and FL. Any ideas?
Bridge of drweaver InDesign and wil Photoschop update however
Work on pc, win 7
someone at - it a nail?

Peter,

Have you used it?

http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

I am trying to cancel my subscription, you need now to an upgrade of system of use of the services. I am not able to update at this time and your cancellation instructions do not lead me anywhere it is useful.

I am trying to cancel my subscription, you need now to an upgrade of system of use of the services. I am not able to update at this time and your cancellation instructions do not lead me anywhere it is useful.

Hi Scott,.

I checked your account details. There is no active member under your email address.

Please try to connect with the correct email address. You will find the option of management plan.

Concerning

Megha Rawat

I am not able to update creative cloud (error 1 and 2), what to do?

I am not able to update creative cloud (error 1 and 2), what to do?

Hello

Please check the help below document:

Error: "unable to install". Creative cloud office

Creative office of cloud has failed to update. (Error code: 2)

Kind regards

Sheena

I'm not able to add a shared printer on a Windows XP client computer.

original title: network printers

I'm not able to add a shared printer on a Windows XP client. One, printers

Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print

Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux

machines on the same network. They are all able to print. The only one who does

not working is a Windows XP client. This machine has also win 7, Vista installed

on different hard drives. they are able to print to shared printers. I have

cammot access to a printer by using the UNC path. I can see the shared

printers in Favorites network but I can not connect. If I use the add printer

Wizard to add a network printer, the printer appear in the book: but

Yet once, they will not connect the error message I get is:

"Unable to add the printer connection. Either the typed wsa printer name

incorrctly, or the specified printer has lost its connection to the server. »

I checked the permissions for the priners and I am logged in as one

administrator when I try to add the printer. I also checked the group policy and

everything seems to be oK. I also deleted and added the printer to the

Server, that I managed to install them as local printers on the affected XP machine

using the \\server_name\printer_share_name port. The priner name and the

share name are the same for each printer. They have all worked last week that

network printers. I'm curious to know what is causing this weird behavior. Any

help would be greatly appreciated.

Thank you

John

Hello

Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

Hope that helps.

I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC.

Original title: upgrade

I am operating Windows Vista. I was not able to find the instructions for upgrade to Windows 10. The upgrade site says to buy a new PC. Any advice?

Hello

You buy Windows 10, as there is no free upgrade to Vista 10.

https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

"FAQ Windows 10.

http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

See you soon.

I'm not able to download Adobe Edge reflow to my Windows 10. It is said there download on the web page, and the seams do something on the cloud adobe creative (but that's all). I don't see that she has actually download the apps tab and tried remained

I'm not able to download Adobe Edge reflow to my Windows 10. It is said there download on the web page, and the seams do something on the cloud adobe creative (but that's all). I don't see that there actually download the apps tab and tried to restart my computer, but nothing works.

Has managed to understand me. Right-click on the icon "Adobe Creative Cloud" and click "Properties" and click on the tab "compatibility". The decline of the antipodes 'Compatibility Mode' select 'Windows 8 ', click on 'Apply' then 'OK'. You should be able to go back and re - download the Adobe Edge reflow, by going to tools and software Responsive Web design | Download Adobe Edge reflow CC (Preview).

Please help, I am not able to update windows: error code 0x80070005

This is my result

HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base

HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm

HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005

HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter

HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005

HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.1800

Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

Please check that you are logged into an account with administrative privileges.

Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.
1. Download AccessChk (Sysinternals). This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services. Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx
2. Save the file on your desktop zip and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.
  
  Therefore, you should see a folder called AccessChk on your desktop.
3. Open the folder AccessChk
4. Hold the SHIFT key and right-click in the window. Select "open here command prompt.
5. A command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >
6. Type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.
7. Close the command prompt window. Open the Accesschk folder on your desktop (if it has been closed).
8. Double-click Accesschk.txt (text file), it should open Notepad.
9. Copy and paste your results with a new question in the forum of Windows Update. (Make sure that you write 0x80070005 in the subject).
Reference1

If this is not enough: -.
1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
  
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
  SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.
2. Please, go to the desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.
5. Copy the following commands, and then paste them into the opened Notepad window:
  
  off @echo
  
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

@Echo =========================
Completed @Echo.
@Echo =========================
@pause
After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
View the desktop and right click the reset.bat file, then choose "Run as Administrator".
You will see a window of type BACK treatment.

NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

I was not able to update my windows via windows update. Help?

Whenever I get a notice to update or install windows updates, I click on the taskbar icon to install the updates. But the problem is that I did not install the updates successfully. How can I fix this. I have windows vista Home premium 64-bit. My computer is barely a year old, and this problem started quite recently (as in the last 3 months). Help!

Hello

It's probably something you have installed about three months ago. Probably a program of safety of a certain type. I would like to begin by turning off your antivirus and third-party firewall programs. After that they have been disabled, reboot and see if you can install updates.
FYI: You can usually find software security running through an icon in the flight low corner... the task of Notification bar. Generally, it can be accessed with either a left or right mouse click.

I hope this helps Mark <> Microsoft Partner

Windows 8 is not able to update after update to 8.1

I have a Sony Vaio laptop all in one office, i5processor, svj202 13cxw, 750 GB Hdd and 4 GB of ddr3 ram memory, which came with a stock of windows 8.

I've updated to 8.1 windows when they are available.

I got errors and my video driver continued to plant, so I did a system update,

(where it UN-installs all programs I installed, but keeps all my personal documents).

This brought me to windows 8, not the 8.1 which I was previously on.

Then my computer would not start because of the bootloader windows losing a file, cause of grub 2, if

I then did a System Restore ( option in mode Assist based computers Sony laptop/desktop computers).

When I did this, I now return to normal, so I've updated all over 'Sony updates' to go to windows 8.

but when I try to Update windows, it just stays on, the download of updates to 99, but nothing does ever download.

I then used Update utility Troubleshooting window, which displays 3 errors, Microsoft where 2 say where fixed and the other

says repair of missing or damaged files (see attached copy).

I then ran CMD in administrator mode, typed in [sfc/scannow], without square brackets, and it came with.

""Windows resource protection did not find any breach of integrity. ". " So I got no corrupted files repair.

I just want to go back to windows 8.1 and windows not in store and I said, he used up all of my updates are processed.

Please help me and if I re - install Windows 8 entirely on my own, Download load an iso and reformat and reinstall, how I can activate when

I don't have a serial number for one that came with my office. In addition, this computer is only 2 months and still under warranty from Sony, but

They claim that it is a software problem, not hardware. They do not provide that reinstall all the software that I am available and trying to talk on the phone

was a headache. Please help if possible or just reply that you don't know what to do and I'll continue my work until I have understand something.

Here's what I got after I ran Microsoft Windows Update troubleshooting utility:

Problems found

Search for the missing or corrupt
files

Check
for missing or corrupted files

Detected

Fix missing or corrupt files

Completed

Windows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)

Windows
Update error 0 x 80070057(2014-03-09-T-01_51_39P)

Fixed

Store data to reset Windows Update

Completed

Recent installation problems
updates

Problems
installation of recent updates

Fixed

Fix Windows Update

Completed

Potential problems that have been verified
Environment of Windows Update the variables are incorrect Windows Environment variable update are incorrect	There is no question
Some security settings are

missing or changed

Some
security settings are missing or have been modified

There is no question

Registration for the service is missing or damaged

Service

registration is missing or damaged

There is no question

Windows Update Services are not running

Windows
Update Services are not running

There is no question

Encryption services components are not
registered

Cryptographic
service components are not registered

There is no question

Problems found

Detection
Details

Search for the missing or corrupt
files

Detected

Fix missing or corrupt files

Completed

Output of the SFC

Output:	Windows resource protection did not find no integrity These violations.

Windows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)

Fixed

Reset Windows Update data

store

Completed

DataStoreAndWULogFiles.zip

18.77 MB

Name of the file:	DataStoreAndWULogFiles.zip

Recent installation problems
updates

Fixed

Fix Windows Update

Completed

Windows repair
Update of services and
dependencies

Potential problems that have been verified

Details of detection

Windows Update environment variables
are incorrect

There is no question

Some security settings are missing
or have been changed

There is no question

Registration for the service is missing or
Corrupt

There is no question

Windows Update services are not
running

There is no question

Encryption services components

is not registered

There is no question

Details of detection

Error report

RootCause:	RC_DataStore
Error code:	0 x 80070057
TimeDetected:	2014-03-09-T-01: 51:39 P

Collected files

Name of the file:	CheckSURLog.cab

The service status

Problem with the BITS service: the requested service has already been
has started. More help is available by typing NET HELPMSG
2182.

Collection information
Computer name:	THEDARKNIGHT
Version of Windows:	6.2
Architecture:	x 64
Time:	Sunday, March 9, 2014 01:50:24 PM

Publisher details

Background Intelligent Transfer Service
Find and solve problems that can prevent work background downloads
Package version:	1.2.1.20131113
Publisher:	Microsoft Corporation

Windows Update
Find and fix problems with Windows Update
Package version:	8.1.1.20131113
Publisher:	Microsoft Corporation

http://Windows.Microsoft.com/en-AU/Windows-8/why-can-t-find-update-store

Why I can't update in the store?

Although the Windows 8.1 update is downloaded and installed from the store, your Windows PC needs updates, 2871389 KB and KB 2917499, until Windows 8.1 is available in the store.

You must refresh the content in the store.

Implementation error "the application BTTray.exe does not able to initialize properly" soon after connecting to Vista Premium 32 bit. Same error when you try to connect to Citrix, "the wfcrun32.exe application could not initialize correctly.

On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
Is could someone please help me get rid of these annoying errors?

I came across a similar story, while answering a different question, earlier today. It seems to involve Dell machines and a corrupt file of the MFC80.dll. If it's useful to you or not, I'm not sure, in any case, you would like to read this link.

2.0 secure Local data RMCPlg.exe and BTTray.exe errors
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en

The previous post, I referred to was this one.

The Groove application error
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c

Not able to update IE8 too 11 IE in windows 7 64 bit

Similar Questions

Maybe you are looking for