Windows 8 is not able to update after update to 8.1

Similar Questions

• Windows install is not able to install updates Java

  My windows installer is not able to install the java update can help you?

  * original title - new update for java could not install and suggesested I ask you to help with Setup *.

  Download and install the stand-alone version: Windows 7/XP/Vista/2000/2003/2008 Offline (32-bit)

• My computer (windows vista) is not able to check the updates of windows, anyone able to help?

  My computer (windows vista) is not able to check the updates of windows, anyone able to help?  I get the following error message

  Hello

  What error message?

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum, INCLUDING the error message

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• not able to update, it says: error WindowsUpdate_8024402f please help

  not able to update, it says: error WindowsUpdate_8024402f please help

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80244016-8024402f-or-c80003fa>

  UTC/GMT is 17:37 on Sunday, May 13, 2012

• Downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108

  Original title: update windows

  I downloaded windows 10 but not able to install that, due to a problem. now m by downloading again n it's show error 80010108. pls help me.

  thanku

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• repately not able to update the update CS5 illustrator, also FW and FL. Any ideas?

  repately not able to update the update CS5 illustrator, also FW and FL. Any ideas?

  Bridge of drweaver InDesign and wil Photoschop update however

  Work on pc, win 7

  someone at - it a nail?

  Peter,

  Have you used it?

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

• Not able to update the drivers

  I'm not able to update my drivers for hp support assistant-maintain-refresh, my warranty has expired there is nothing to do with it.i can't seem to connect to the servers of hp but download the updates

  Connecting to the servers of Hp-Pass

  Download of updates in case of failure

  Collection of information in the event of failure

  ANI system in case of failure

  Preparation action list-Pass

  Could someone help me...

  Try to download the latest version of the wizard help here: http://goo.gl/yQ5DJ

  If this does not work, you can go to this link http://goo.gl/PIzE4 and select your operating system and then manually download drivers and other updates that you may need.

  Please let me know if it helps.

• I forgot to package ID, not able to update the app World! Help, please

  Hi guys,.

  As the title says, I forgot the package ID, and I'm not able to update the app World! whenever I submit a press release I get an error indicating that the package what ID does not match. Please suggest me what I can do? How to find the package id? Thank you very much. See you soon.

  Goto the BB forum and ask the question. BB has the ability for you to create a new token of dev and map it to the original. I had to do this recently. MShom was the one who did it for me.

• Windows startup is not full, and then after a few seconds that the starting ends.

  windows startup is not full, and then after a few seconds that the starting ends.

  Original title: boot of win7

  Yes, it's the way it happens. All the other stuff are load - computer office, drivers, anti-virus, etc.
  It takes longer is that you have a lot of programs that load with Windows.
  and is faster if you have Windows on a SSD instead of a disk hard standard tray.
  Win7 also much faster than XP load, anything.

• I'm not able to update my credit card. Change the payment does not appear next to my plan for

  I'm not able to update my credit card. Change the payment does not appear next to my plan for

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -Credit card https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-cr creative - cloud.html

• I am trying to cancel my subscription, you need now to an upgrade of system of use of the services.  I am not able to update at this time and your cancellation instructions do not lead me anywhere it is useful.

  I am trying to cancel my subscription, you need now to an upgrade of system of use of the services.  I am not able to update at this time and your cancellation instructions do not lead me anywhere it is useful.

  Hi Scott,.

  I checked your account details. There is no active member under your email address.

  Please try to connect with the correct email address. You will find the option of management plan.

  Concerning

  Megha Rawat

• I am not able to update creative cloud (error 1 and 2), what to do?

  I am not able to update creative cloud (error 1 and 2), what to do?

  Hello

  Please check the help below document:

  Error: "unable to install". Creative cloud office

  Creative office of cloud has failed to update. (Error code: 2)

  Kind regards

  Sheena

• Windows Vista will not install new updates after installing SP2

  Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

  I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

  I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

  Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

  Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

  You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

  Let me know if you still need help, and I will respond with what I've done.

• Please help, I am not able to update windows: error code 0x80070005

  This is my result

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005

  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.1800

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. Save the file on your desktop zip and extract the file:
     -Right-click on the file and select extract all...
     -Click Next when prompted for the Destination.

     Therefore, you should see a folder called AccessChk on your desktop.

  3. Open the folder AccessChk

  4. Hold the SHIFT key and right-click in the window.  Select "open here command prompt.

  5. A command prompt window should open a similar message:
     C:\Users\\Desktop\accesschk >

  6. Type the following command and press ENTER:
     "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
     Tip: You should be able to copy and paste the command into the command prompt.

  7. Close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. Double-click Accesschk.txt (text file), it should open Notepad.

  9. Copy and paste your results with a new question in the forum of Windows Update.  (Make sure that you write 0x80070005 in the subject).

  Reference1

  If this is not enough: -.

  1. If please download the subinacl.msi from the following link and save the patch to installation on the desktop:
      
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
     SubInACL (SubInACL.exe)
     SubInACL is a command line tool that allows administrators to get the security information on files, registry keys, and services, and the transfer of information from one user to another, from local or global group to and from a domain to a domain.

  2. Please, go to the desktop and double-click on the downloaded file.

  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. Click the "Start" button in the "Search" bar, type: "Notepad" (without the quotes) and press ENTER.

  5. Copy the following commands, and then paste them into the opened Notepad window:
      
     off @echo
      
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
• After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
• View the desktop and right click the reset.bat file, then choose "Run as Administrator".
• You will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

Reference2

This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

• I was not able to update my windows via windows update. Help?

  Whenever I get a notice to update or install windows updates, I click on the taskbar icon to install the updates.  But the problem is that I did not install the updates successfully.  How can I fix this.  I have windows vista Home premium 64-bit.  My computer is barely a year old, and this problem started quite recently (as in the last 3 months).  Help!

  Hello

  It's probably something you have installed about three months ago. Probably a program of safety of a certain type. I would like to begin by turning off your antivirus and third-party firewall programs. After that they have been disabled, reboot and see if you can install updates.
  FYI: You can usually find software security running through an icon in the flight low corner... the task of Notification bar. Generally, it can be accessed with either a left or right mouse click.

  I hope this helps Mark <> Microsoft Partner