Not able to use moving backward with Quiz?

Similar Questions

• Norton and 35 of Firefox are not compatible... I ran Norton Live Update... If Norton is up to date. Why am I not able to use my Norton with Firefox toolbar...

  Why am I not able to run my toolbar on Firefox version 35 Norton. I ran Norton Live update... don't give me good results. I have been using an older version of Firefox... Norton is compatible for a while and all of a sudden become compatible... is not acceptable. I don't usually update FireFox immediately due to problems of this kind in the past, but Firefox likes to take over...

  I'm at the point where I feel like forget Firefox and switch him permanently on explore...

  So frustrating.

  I have the same problem. Norton Support just spent 1.5 hours trying to get v35 to accept it is the latest toolbar (v 2014.7.10.12) on my computer that they - Norton - say IS COMPATIBLE WITH the V35. They suggested that I have than uninstall/reinstall Firefox, which I did. It made no difference.

• I have an old Dell computer with Windows XP Prof installed including service pack 1. All of a sudden, I'm not able to use my password to connect.

  I have an old Dell computer with Windows XP Prof installed including service pack 1. All of a sudden, I'm not able to use my password to connect. I'm sure that the password is typed correctly, but it does not accept it. Now what?

  original title: password problem

  Hello

  Please try some of the suggestions provided in the following article:

  http://support.Microsoft.com/kb/321305

• When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  Most likely, the images are 16-bit/channel.

  Go to Image > Mode and click on 8-bit/channel and see if that solves the problem.

• I would like to delete a short gray border of two images. I need help because I'm still not able to use PhotoShop. Could someone kindly help me with this?

  I would like to delete a short gray border of two images. I need help because I'm still not able to use PhotoShop. Could someone kindly help me with this?

  In order to change a part of an image as needed here, I would use the "Liquify" filter See below, it is quite easy. You just move the lower lip to be more elegant and not like the guys are salivating.

  

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• RN204: TB 2 x 4 and 1 x 2 and 1 x 3 TB - not able to use the full capacity

  OS: 6.4.1

  Hello

  I spent many hours up to now to gather without success. The calculator RAID netgear said 8.16 TB in X-Raid and Flex - Raid 5 with my combination of hard drives, but I'm not able to put in place. As I want to use the encryption I started with a Flex - Raid 5 with 4 hard drives, resulting in a volume< 6="" tb="" (4x="" 2="" tb="" as="" raid="" 5)="" and="" i'm="" not="" able="" to="" use="" the="" capacity="">

  What is the right way to configure the system with full capacity of 8.16 TB (perhaps with several volumes)? I do not know more what to try and to reset the system and let X-Raid decide will not work because you cannot configure X-Raid with encryption.

  I think that to use the entire space, we need something like:

  RAID 5 on all 4 hard drives with 2 TB = 6 TB of usable capacity

  RAID 5 on 3 hard disks with a capacity of 1 TB = 2 TB

  RAID 1 on 2 hard drives with a capacity of 1 TB = 1 to

  But HOW? Don't see no way to add a volume because all HDDs are 'blue', they do not serve at full capacity!

  Here my current situation started with all the devices that have been installed since the beginning (it is not a HARD extended drive configuration).

  

  It is excactly what I expect it works when buying the RN204. But this device is now on its way to Amazon and my new QNAP 431 + initialization of disks now!

  Thanks for all your help!

• Not able to use my MSN browser windows vista upgrade to sp3

  Original title: windows vista upgrade to sp3

  I want to upgrade Windows Vista sp1 to sp3. Kindly ping me as soon as POSSIBLE because I'm not able to use my MSN browser. I have problems of compatibility with IE 7. Waiting for your quick response.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install the Service Pack.

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

  MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Not able to do a scan with Microsoft InBox Driver

  Hello

  I am not able to do a scan with the Sub parameters of analysis, using Inbox Driver Scanner Scan & Fax application in vista PC [32bit_Vista X 86 SP2] client (WIA 2.0)

  Source: Feeder

  LongueurSource: A4

  Color: gray

  Format: XPS

  Resolution: 100

  The same combinations work with the driver supplied by the manufacturer, but with the drivers Microsoft InBox, I am not able to do a scan with this combination.

  I was getting the error message below "ERROR applying settings to Driver".

  Kindly let me know, it of because of a inbox driver or not.

  If yes give me your comments on this to solve.

  If there is no problem with the driver supplied by the manufacturer, by all means use this driver instead of the Microsoft Inbox driver (whidh is perhaps not as common or may have other issues).  If the other driver has resolved the problem, then be happy that you have a solution and use it.  Forget the driver that does not work well and just throw it away.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Mr President, I put in my window 7 Professional which I totally forgot the admin password, I'm not able to use my computer, is it possible to recover the admin password?

  Mr President.

  I got the admin password in my window 7 Professional which I totally forgot, I'm not able to use my computer, is it possible to recover the admin password?

  There is no way to retrieve a forgotten password. However, you can do this:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point until you have changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I

  Since the last refresh of my payment for Adobe enjoy cloud data, I was not able to use the software, not Eve open one of the applications, even the payment has been made and saved to my banck account. I have been a month without service and I've not found a way to communicate directly with any responsible for Adpbe, nor received any satisfactory support of any kind. How can solve this problem? Is it possible to have a personal contact to have a personal support, instead of a jungle of pages on the web that will lead you to more of the same pages?

  The CC is waiting for bank payment, if payment is declined then CC will be suspended.

  Concerning

  Stéphane

• My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat. I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine. How can I go on the validation of the software not

  My OS has been upgraded to Windows 7 at 10 without disabling the software Adobe Acrobat.

  I am currently not able to use the serial number. to validate the (Acrobat 9.0) software installed on the machine.

  How can I go on the validation of the software now?

  Try contacting the Adobe Support via chat and ask them to reset your activations - don't ask more than that or they are likerly tell you to look on the forums for help (where no one can help with reset).

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp