Not allowed to log on.

Similar Questions

• Account not allowed to log on by using the current workstation

  Is this a bug in ACS 5.3.0.40.4?

  We have some AD user accounts that are allowed to connect on some computers. I am able to connect to computers are allowed with the AD-account, but the 802. 1 x fails and the client cannot obtain a network connection. It's on the vlan right, but he cannot ping the default gateway and is not set to the guest VLAN. In the ACS journal, we see the error "" EAP session expired: 24441 account not allowed to log on using the current workstation".

  I checked it by testing another user. I limited the user to only connect to a single computer. I then logged on this computer, and shortly after I lost the network connection and the same error in the log.

  This means that the 802. 1 x fails if you try to limit which computers a user account can connect to AD. If anyone has experienced this before?

  I know that he is two years, but we just encountered the same problem, but with ISE 1.2.  ISE and ACS MUST be added to the list of computers that are allowed for the user.  Which does not require that the ISE or ACS is in the same domain as the users, which would be a problem for the person who started this chain.  The "current workstation" in the error message "account 24441 not allowed to log on by using the current workstation" refers to the ACS or ISE, not end machine, as explained above maldehne.  This is because, for the most part, the user logs in ACS or ISE in order to authenticate against AD.  Not directly, but it's how 802. 1 X.  Added once ACS or ISE, authentication works perfectly (as long as everything else is correct.)

• Not allowed to log on when the domain is not available

  Hello world

  I have setup a T500 on the area of the company and when I try to log on to the laptop when a connection of field is not available for example from home. I get "you are limited to using fingerprints only to connect. But the fingerprint system is currently unavailable. Please contact your administrator"pop up message box. However I have not enrolled in the connection of the fingerprint.

  Thanks for any help on this.

  Rhys

  Have found the solution. It's easier that I thought it would be.

  I logged the area. Open the lenovo fingerprint software. entered my password, which allowed me to go into the options and uncheck the box "logon of fingerprints only", and then closed the lenovo fingerprint software. Then I disconnected and disconnect all network connections and could open a session with just by typing the user name and password.

  Hope this helps someone else.

  Rhys

• You are not allowed to log on the server: windows vCenter server 6.0 R2 2012

  Hi all

  I installed vCenter server 6.0 on windows server R2 2012 successfully.

  version of vCenter: VMware-VIMSetup-all - 6.0.0 - 2656757.iso

  Windows 2012 R2: en_windows_server_2012_r2_with_update_x64_dvd_6052708.iso

  vSphere client 6.0 standard

  But after that I can't use vSphere client 6.0 standard to connect to vCenter Server.

  Message posted on vSphere client: "you don't have permission to connect to the server vCenter 6.0.

  

  If you have solved that problem before, or if you have the solution for this problem,

  Welcome to ideas, someone else knows this problem.

  Thank you very much.

  Use more details

  username: [email protected] (where vSphere.local is your UNIQUE authentication domain, if you have changed the name of it, use the one that you set during installation)

  password:

  This will allow you to connect.

  = You can also try to use the web client in Google Chrome or Mozilla Firefox

  https:// /vsphere client

  logon even powers only above

• 38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  38.0.1 updated to does not allow me to log into G-mail. I know that my user name and password, cookies are enabled and clear history information. I am able to Safari.

  Thank you. I could sign G-mail in Mode safe, so I "refreshed" Firefox and that took care of him. Appreciate your quick response and helpful instructions.

• Log on to the method not allowed on this computer

  original title: Error Window Vista.

  You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information. This is the response I get when I try to log on my Windows Vista computer on a domain. I removed all the newspapers deny on policies affecting the comments. Always the same. Can anyone help.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department.

• Microsoft Remote Desktop does not allow users to log on simultaneously

  Original title: problem with Microsoft Remote Desktop not allowing users to log on simultaneously

  I am currently using a MAc to connect to a desktop running windows 7. Recently, when I try to access the computer with Microsoft Remote Desktop it will launch all users on the computer. He was not used to do this, does anyone have an idea what could have caused this and how to fix it?

  Hi Bert,.

  Thanks for posting your query in Microsoft Community Forum.

  The question you posted would be better suited in the TechNet Forums. However, we can refer to the articles below and check if the problem still persists.

  Configure the remote desktop on Windows 7 systems

  Connect to another computer using Remote Desktop connection

  If the problem persists, I recommend posting your query in the TechNet Forums for the best support.

  Hope this information is useful. Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

  Thank you.

• my screen does not allow me to log "user profile registered failed the newspaper."

  my screen does not allow me to log in, it says "profile servce has no log in the user. User profile cannot load.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• My user profile Service is not allowing me to log in. "Could not load."

  Suddenly, I now get a message that says, "service user profile Service does not have the log on." User profile cannot be loaded.  This happens when I get my password (never changed in 3 years) when I try to log in.  When I try to resolve through changes in the user profile, it does not recognize the password.  Don't know how to solve the thi8s.

  Rich

  Try this:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you just created

  See you soon.

  Mick Murphy - Microsoft partner

• Why Firefox is not saving my log in info after that I used the option "Remember Me"?

  Why Firefox is not saving my log in info after that I used the option "Remember Me"?
  Whenever I get on a frequently used site where I have already indicated on the Firefox browser to save my log in info, I still need to manually connect. The latest versions of Firefox are not like that. I am running Firefox on both my Imac (OS 10.5.8) and on my Mac Book Pro (Snow Leopard), and on each machine, the latest version of Firefox does the same thing. I don't have this problem with Safari, but I prefer to use Firefox then please let me know if there is anything I can do to solve this problem.

  This has happened

  Each time Firefox opened

  Is two months ago

  If you register your name, and your password in the password manager and then having no other effect that Firefox can fill these name if necessary.
  Firefox is not automatically a session you.
  Many Web sites may use a cookie to remember you, you do not need to open a session.

  Websites to remember you and automatically log you are stored in a cookie that you must allow: Firefox > Preferences > privacy > Cookies: "Exceptions."
  Also make sure that you do not use the delete, search and download Firefox browsing history to erase "Cookies" and the "Site preferences" "browser history".

• Winows xp 2 is not allowing to install all software

  I use windows xp professional 2. is not allowing any software to install. I tried running anti virus but it does not work, and also my system restarts automatically when the system is idle. After the reboot automatically checks the file in the disk. What can I do? What is the problem.

  What is Windows XP 2?

  What version of the operating system Windows am I running?

  Assuming that it's just Windows XP, 32 - bit...  And this isn't a HARDWARE problem...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• modem internal not allowing not computer go into sleep mode

  My internal modem will not allow my computer to enter the mode 'sleep'.  I tried to disable the modem completely because I do not use it, but this has not fixed the problem.  Also sometimes my monitor will enter a screen in economy mode and will not come out of it, the computer does not respond when I move the mouse.  I have to turn it off completely for a response.  I don't know if the two problems are related.  What can I do?

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Update is not allowed to download due to the regulations?

  Windows 7 Edition using Home Premium.  For several weeks I can't download files, even from Microsoft.  They appear to download successfully, but I can't run or save them, nor can I find them in the downloads, Desktop, anywhere.

  Looking at the Windows Update log, I find several times: "update is not allowed to download due to regulations."  Is it an idea of why NO file is allowed to upload?  What should I do?  I've tried many 'solutions' proposed in the online forums, including this one.  Thank you.

  Assuming that you can use the "Win7 upgrade disk" to do the clean install, you MUST perform an "Advanced (custom) installation" of Win7 (which will format the HARD drive in the process, hence the need for the backup of your personal data).

  'Personal data' for me = the content of the current My Documents folder, e-mail Client (for example, Outlook;) Data from Windows Live Mail), favorites of IE. You pouvez want to backup your user account settings, as well.

  You can locate your backup on an external drive, Yes. If I had to, I would format the external drive first (since external readers who were connected to the computer may be infected, too).

  You do NOT want to restore the backup DATA until it is scanned by your application anti-virus/anti-spyware installled and (in MY opinion) at least an analysis online "on-demand" (e.g., http://www.eset.com/us/online-scanner).

  If you need additional help with the fresh install of Win7, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-system

  If you end up having to do a clean install of Vista, post in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Good luck!

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• (Browser) clientless SSL VPN access is not allowed.

  I'm trying to set up an additional Anyconnect vpn profile.  I have one that is working properly but this news will not.  When I try to log in to download the client or try to connect with a computer that already has the customer I can not.

  The client side receives this error: "access (Browser) Clientless SSL VPN is not allowed."

  On the ASA journal:

  4 May 10, 2010 11:42:17 722050 group user <> IP <10.12.x.x>Session is over: SVC is not enabled for the user
  4 May 10, 2010 11:42:17 group 113019 =, Username =, IP = 0.0.0.0, disconnected Session. Session type:, time: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: unknown

  He does reference the main our ipsec connection group name.  I think it's very strange.  Here's the part of my config that treats the ssl client.

  tunnel-group type SSL - RDP remote access only
  tunnel-group SSL-RDP-Only general attributes
  address pool SSL_VPN_Users
  authentication-server-group FUN-LDAP
  Group Policy - by default-SSL-RDP
  tunnel-group SSL-RDP-Only webvpn-attributes
  enable VPN_FUN group-alias
  allow group-url https://64.244.9.X/VPN_FUN

  internal SSL - RDP group strategy
  attributes of SSL - RDP group policy
  value of VPN-filter RDP_only
  VPN-tunnel-Protocol svc webvpn
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RDPonlyVPN_splitTunnelAcl
  WebVPN
  list of URLS no
  SVC request no svc default
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389

  mask of local pool SSL_VPN_Users 10.12.20.1 - 10.12.20.100 IP 255.255.255.255

  Post edited by: kyle.southerland

  After reviewing the config, the difference between groups Anyconnect and SSL-RDP-Only is the AAA server.

  AnyConnect group uses the radius for authentication (RAS01) server, while the SSL-RDP-Only group uses an LDAP server for authentication (FUN-LDAP), and the configuration of the FUN-LDAP server, you configure the mapping of LDAP attributes, which is to map the group "An1meR0xs".

  To test, change authentication LDAP aaa RADIUS for the newly created group.

  Hope that helps.