not displayed in the web client vSphere applianced replication

Similar Questions

• VRO v6.01 installation but not displayed in the web client

  I'm having trouble with a clean install, not appearing is not in the Web Client, and I hope someone here can help you.

  I built my house with vSphere Lab 6 now it's GA, and after sunrise vCenter and run, I thought I'd have a look at the latest and Orchestrator (v6.0.1). I have deployed the OVF very well (I used the GUI client such as web client and their tools of 'integration' are all except) and entered the web configuration portal. I finished the tab "vSphere infrastructure" (SSL, authentication SSO, licensing, registration vCenter) who has successfully completed (according to the display messages).

  However, when I go into the tab Orchestrator WebClient service where no server is listed and no workflow is available. I checked the plugin vCenter client is enabled (under Administration > Solutions > Client Plug-ins) and I also tried to register through the client GUI Orchestrator and 'Add a vCenter Server' and 'Save a vCenter Server' workflows running both successfully completed. Still no luck.

  Any ideas how I can get registered with vCenter Orchestrator (I use the VCSA) or if I start troubleshooting? Good to check logs files?

  Thank you

  Ed.

  OK, if you see that the "get started page", this means the plugin vRO has not been downloaded and deployed in vSphere Web Client.

  In 6.x, the binary plug-in are hosted on server vRO and vSphere Client Web downloads and deploys it. How the plugin site is discovered is the URL extension of the VC.

  The first thing to check if if the URL is valid and the plug-in can be downloaded from it. Open the managed object browser, and then clicks ExtensionManager -> "com.vmware.vco" extension-> client -> url. Its value must be something like https://vcoip:8281/vco/vsphere-web-client/vco-plugin.zip. Open this URL in a browser and verify that the downloaded ZIP file.

  If the ZIP file can be downloaded without problem, check the file of newspaper Web Client vSphere (vsphere_client_virgo.log) traces associated with failed to download plugin (you can find the name of the vco-pluginfile).

  If there is nothing associated with vco-plugin in the papers then maybe vSphere Web Client not attempted to download it. I think he's looking for plug-ins at startup, then you can try to restart the Web Client vSphere (in the device, it is named vsphere client , so you can restart it with the command "restart service - vsphere client").

  In addition, you can try to connect to Web Client vSphere with the admin user, then go to Administration -> plugins customerand click on the search of new plug-ins link.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• Manager update is not displayed in the section of vSphere web customer service

  I know component Server Update Manager is installed on VC, but I'm not able to see the Update Manager icon in the 'home' of web client vSphere section.

  I want to set up the frequency of the update of the repository browser and no vSphere client.

  I can see the icon for the Update Manager as well in "hosts and clusters" and "models and virtual computers.

  Update Manager still do not offer web client I believe. You must use vSphere client to use Update Manager

• "Use authentication Windows session" does not work on the Web Client

  When I check "Session authentication using Windows" and click on "Login", I immediately get "username and password are required. I was able to solve the same problem of thick client with KB2050701, but that did not address the web client.

  I opened a ticket - apparently it's a known issue with no current fix or workaround.

• Very slow performance with the Web Client vSphere

  I'm testing the vSphere Web Client, but I find it excruciatingly slow - it takes almost 5 minutes just to open a session, and each click after that I take a good load of 30 seconds before the new page is completed. I think I spent a good 10 minutes to total just go to the screen where I could power on a virtual machine, which is something that can been done in less than a minute using the traditional desktop client.

  Horribly misconfigured web client somehow?

  The following changes improved the performance of the web client of my client. So far, no more hung tasks, navigation in the console of the web client has been improved. We are always monitoring well.

  Has increased the heap size JVM of vSphere Web Client to 3 GB. Used the following KB KB VMware: settings of the configuration in VMware vCenter Server 5.1 and 5.5 Tomcat server

• When I installed the web client vsphere using vcenter server iso, encounted an error that the vcenter server signon administrateu use name and password is invalid

  VCenter server is version 5.1 and this server is a member of the working group.

  It comes to my administrator:

  

  So, I used ISO server vcenter and installed web client pulg-in vsphere, it prompted:

  I've used many ways, but failed.

  usernme:admin@system-domain,

  so, I do not know how to solve, and I only know this administrator password.

  I'm not vCenter sign the only to have another admin, please help.

  

  and another question: how install and configure the data via the vsphere 5.1 customer protection, vsphere isn't vsphere web client.

  You must provide credentials for the user admin@system-domain.

• Type does not display on the Web site

  After I publish my project muse on the web or on my server on catalyst, when the page is initially in place, the type is not displayed. If I refresh the page, it does not appear. (but I can't very well tell my viewers to do to see my site). This must be fixed. (I use a font called WITHOUT opening). This happens in several projects. Someone at - he a clue as to whats going on? one of the sites in question is at http://www.vicontest.com

  I think you use Chrome. If so, take a look at this thread - http://forums.adobe.com/message/6157625.

  Workaround is shown here at the Exchange - http://muse.adobe.com/exchange-library/chrome-33-webfont-workaround-1.

  Thank you

  Vinayak

• Flash .swf content that is not displayed on the Web page

  A flash melted fade on .swf content on a Web page is not displayed online.
  can you help me please?
  Note: works fine offline on my PC and all the targeted links.
  Thank you very much. http://www.ethiosurf.com/aboutethiopia.html

  The code in the HTML to the swf seems to be missing a whole bunch of settings, but I can't point the finger to say that it won't work.

  The best advice I can offer to get started is to use the code in the html page that Flash creates when you publish (be sure to have the html option selected in the settings of publication). You will see two sections of < script=""> and < noscript=""> which places the swf file in the html page and up in the head section will be one or two lines of code related to a javascript file: AC_RunActiveContent.js, you will need to include as well. Also, don't forget to copy the AC_RunActiveContent.js file on the server (Flash adds this file in swf file when you publish).

  See if it works for you.

• I designed a website in Flash CS5 and the .swf file is not displayed on the web!

  OK, I'm very new to Dreamweaver CS5, I created a website in Flash CS5 (it is a model of "coming soon").  I got all transferred in Dreamweaver CS5.  However, when I saw in the browser it works fine, but when it is transferred to my server I see nothing other than the index with the .sfw in her file files.  When I click on it, my coming soon design show! I added an index.html file, but when I do this I get a blank screen.  I tried a file index.swf without success.  How can I get this for a glimpse on the web without displaying the index? I changed the permissions of 644 to 755, still nada. Here is my site www.dallasxplosion.net.  You gurus can help me with this minor problem?

  Hello

  Please try it out.

  Simply save this file "dallasxplosiontvcs.html" under the name "index.html", so your "dallasxplosiontvcs.html" remains in your directory, load the file 'index.html' on your server. Watch Hat happens, I'm sure you will be fine.

  Hans G.

• BlackBerry Torch 9800 smartphones does not display correctly the web pages properly and is healed by a reboot

  The normal display of the torch screen is shortened, the top of the page you are looking at is then repeated at the bottom section. Allow about 3/4 inch

  7, I made a new upward with the desktop software. Then, I removed all the info on the phone, then upgraded to reinstall the operating system. After that, I did a restore my files and programs. After the start, I did a battery pull. I think I can consider the issue RESOLVED because it plays as it should since Sunday

• SWF files are not displayed when the Web page is published to the web

  I was given 5 swf files to add to a Web page. I insert > media > swf and added each swf along the left side of the page. I can read the files when I saw in firefox, ie, chrome, etc. I copied then all the videos, Scripts files and html on the remote server file. When I go to the update page, the page is displayed correctly except for 5 swf files. The page is located here: http://coeh.berkeley.edu/pehsu/VideosC.html.  I use Adobe Dreamweaver CS6. Any help will be appreciated.

  It seems to give the same strange message "the server cannot find the file specified" on any .swf. If you change a the .swf .jpg file, you get the standard message on the server 404 File not found.

  Try to place one of your .swf files in the same folder as your index.html page. Then navigate to it directly http://coeh.berkeley.edu/pehsu/oscar4.swf

  for example and see what happens.

  I wonder if it is not something your server administrator might help you here.

• My gif files are not displayed on the web page

  My web page has some gif images that are not loading

  Your own solution, you probably need to do is clear cache more often. Especially if you work with your own Web pages. As well as the update of your site if it matches what is on your computer.

  • Tools > Options > advanced > 'clear now '.
  • I thin mine at the end of the session as set of tools > Options > privacy

    http://img232.imageshack.us/img232/4928/clearcachew.png

  To refresh a page using "F5" to refresh without cache but use 'Ctrl + F5 '.

  • http://dmcritchie.MVPs.org/Firefox/keyboard.htm
  • https://support.Mozilla.com/kb/keyboard%20shortcuts