Not enough space

Similar Questions

• Time Machine-not enough space error

  Hi all

  I had to unplug my computer and move it to another room and now after all hang up, I get this message "not enough space for full backup". There are about 150 GB to 2 TB disk space as it is filled with iTunes and Time machine backups.

  I guess it's because ever since I hooked everything back up Time Machine think it is made the first backup of everything rather than pick up where he left off when he made the last backup?

  Please tell me that I shouldn't let it save it for the first time again. It took an eternity to accomplish this last time as the computer kept going to sleep.

  Thanks for any help,

  Al

  Start with 18 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• Bad burn on Blu - Ray; not enough space?

  Hi all

  I bought a blu ray burner =:

  http://www.bhphotovideo.com/c/product/1051647-reg/samsung_se_506cb_rswd_sam_slim _exterior_blue_ray.html

  Create the disk opens its doors to about 66% asks me to insert a disc. The project is only about 3 minutes. long.

  Then, at some point, I get the error message; "Not enough space on the startup disk.

  Once the error was; not enough space on the disk, but it's a Virgin blu - ray disc. (BD - R)

  There is plenty of space on the hard drive of my iMac.

  The burner did not come with software to Mac but I chose the burner in the FCX share window.

  Other: When I right click on a movie on the desktop file I see an option for burning, but where can I say it blu - ray?

  Thank you

  Al

  Is the library of the PCF on your startup disk and where the media is stored?

  If you burn a movie from a file in the Finder, it is a data disk and will not readable on a Blu Ray player.

  Russ

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Backup Restore Time Machine: not enough space

  Hi all, I am a neophyte tech so forgive me if I'm not clear. I will try to explain the problem as best I can:

  I have an old MacBook 2009 running Mountain Lion. A few months ago, my brother gave me his old Pro and so my MacBook 2009 fell by the wayside. I used an external hard drive with that old computer as my backup time machine, but as I tried to transfer a lot of documents and photos and update of dropbox and download photos of google and to understand each of these things as I went along, I totally messed up the MacBook. Just... things are weird... nothing was, where it used to be and my photos were gone and Yes, much of this is probably down to me trying to understand a bunch of new programs at once, BUT what I want to do is to restore it to the way it was using a time machine backup.

  So, I googled around and I know when I start it up until I'm supposed to press Ctrl + R and choose the backup that I want, but when it gets to the part where I select a destination and click the only option (the Mac HD), an error message appears with a yellow flag saying "this disc is not enough space to restore your system.

  Now, I don't really know what that means, but what I want to do is to get rid of the current way, this computer is completely and attach it to the way it was when I did the last Time Machine backup.

  Someone help me please... this stuff is so frustrating when I can't figure it out for me and I am sure that there is an easy solution. I read a lot about partitions etc. but I don't know what all of this means that even.

  Thank you in advance!

  Alexandria

  Boot into Recovery now command + R to start. Choose disk utility and erase the boot volume, it should be named Macintosh HD, unless you renamed it. When the erase is quit disk utility and choose to restore from your Time Machine backup. OS X: on OS X Recovery - Apple Support

• Not enough space in Runtime area. Data not available SMBios. Inaccessible BIOS

  Hello, I was trying a restore or Windows 7 install on a p6510y for a friend. Tried going into the bios to select which device to boot from.

  I hit F10, it says enter the bios or enter the configuration..., then it goes to a black screen with a blue bar at the top. The blue bar is bright blue in the middle and it fades to the edge of the screen. It is not animated. I see no text or the cursor blinking either.

  If I do not go into the BIOS, I get the message "not enough space in Runtime area. SMBios data will be unavailable"and if I hit F2 to continue, windows starts normally.

  I stripped the system down to a single stick of RAM, tried a different PSU, graphics card, vga cable, etc.. I removed the cmos battery and flies over the rider for a solid 30 mins. I can not even access the bios.

  It's a machine extremely strongly virused, I was able to install Windows 7 via disk external drive bootable. The recovery partition is still intact, although it seems empty, still too much space.

  I ran sp49851.exe in windows 7 on the machine, the installation has been apparently successfully, but the BIOS always behaves in the same way.

  I am at a loss, have spent many hours in checking these forums of discussion, does not. Is it possible for me to prepare a bootable USB key and manually install the bios? I extracted the contents of the exe to a folder but I don't know what to do next. The computer has a floppy drive port. For any help or suggestion would be greatly appreciated. Thank you in advance!

  I was able successfully to Flash the BIOS manually, and it behaves as it should. Here's what I did:

  I extracted the contents of my bios file (sp49851.exe), using a program called Universal Extractor.

  I renamed the file alo6.09 to bios.rom (this was the only file required)

  I followed this guide:

  http://www.BIOS-mods.com/BIOS-update/

  Make SURE you get the HP USB Disk Format Tool, they provide a link.

  Make SURE you get the BACK image they provide a link for.

  I used AFUDOS for my AMI BIOS, from which the above ROM file extension. (they provide a link to AFUDOS)

  I used the command line afudos bios.rom/p/b/n/c/e/k/q/reboot (EXACTLY) how they said.

  Went straight into the BIOS, was able to make changes. System seems to work fine. It is very important that you read all of this guide and be absolutely sure that you have the good BIOS before updating. Thanks for the help Dave!

• not enough space in my photo library

  Im getting this message "not enough space in the library". How can I safely back up my photos on external hard drive to the top. Thank you.

  Also applies to Photos.

  iPhoto: move your iPhoto library to a new location

• Re: Satellite U500 begins with the "not enough space in runtime area» message

  I have this message at the start of my laptop U500-17: not enough space in runtime area. And after that ask me to press F1 to continue, but nothing happen, and start the windows does not work. I'm trying to get into the Bios, but I have some error and nothing happen. What should I do?

  In my opinion, you need to contact the nearest Toshiba service provider and ask for help. I'm afraid that your BIOS is troublemaker and they should Flash the BIOS of Mr. Unfortunately, you can not do this alone.
  For owners of Toshiba laptop offer updates of BIOS Win only. With other words, it can be started as a small application for Windows operating system running.

• iPod cannot be synced because there is not enough space

  I just got a new computer and I tried and tried to sync my ipod touch, product type is: Ipod 3.1. and iOS 5.1.1. on the new computer. I have all the songs from the old computer and their transfer to the new computer, but I get the error message "Ipod cannot be synced because there is not enough space to hold all of the items in the itunes library (like 55.88 GB required). This computer now has a lot of hard drive to contain this music, and my ipod has a capacity of 57,92. Now, if I think right, it's almost an ipod everything! I'm so confused by the present. I have not added a lot more music. Please explain and help me understand what I need to do to get my ipod to sync. I tried to reduce the bit rate only to get the error saying that I need extra GB 38.65. What happens here? Help, please.

  Now, if I am not mistaken, the songs that you have in the itunes application, is what gets synchronized, I have additional music in other folders, but I don't have them uploaded to the app. Are they still in the library? Please help me not to be confused on this issue. I greatly appreciate it.

  Thanks for any help you can give me.

  Steve

  You try to synchronize too much media to iPod.

  Verify that synchronization of the settings

  iTunes: synchronization of multimedia content for iPod and iOS devices

  Try the synchronization using the manual method

  Managing content manually on iPhone, iPad and iPod

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• HP Jet x 360: not enough space for the full Windows 10 upgrade

  Just got a HP x 360 for my granddaughter stream.  Indicates its eligible for the upgrade of Windows 10.  When I try to install it through the process, but before it ends and the error comes up saying not enough space. I have to add memory and if so, how.

  Monkey,

  The computer may be running out of physical space required for migration instead of memory needed to actually to crunch the numbers and run the migration program.

  The migration process uses more than 10 GB of space on your computer.

  Please take a look on the following document, including the important notes section.

  Specifications for Windows 10

  Excerpt:

  • Latest OS:

    Make sure you run the latest version of Windows 7 SP1 or Windows Update 8.1.

    Don't know what version you use? Click here to find out. Need to download the latest version? Click here for Windows 7 SP1 or Windows Update 8.1.

  • Processor:

    1 gigahertz (GHz) processor or more fast or SoC

  • RAM:

    1 gigabyte (GB) for 32-bit or 2 GB for 64-bit

  • Hard disk space:

    16 GB for 32-bit OS 20 GB for 64-bit operating system

  • Graphics card:

    DirectX 9 or later version with WDDM 1.0 driver

  • Display:

    800 x 600

• Try Powershell Copy-Item, get the message "there is not enough space on the disk.

  I'm using Powershell 2.

  I'm trying to copy a file, not very complicated.

  Copy-item D:\Outgoing\tsc.sqb D:\Incoming

  I get this:

  Copy-Item: there is not enough space on the disk.
  On line: 1 char: 10
  + Copy-item<  d:\outgoing\tsc.sqb="">
  + CategoryInfo: NotSpecified: (:)) [Copy-Item], IOException)
  + FullyQualifiedErrorId: System.IO.IOException, Microsoft.PowerShell.Commands.CopyItemCommand

  If I replace Copy-Item by Move-Item, everything works fine. I didn't ' t want to move the file, however, simply copy it.

  Any ideas? Files is 230 KB or more.

  Hi BarryFreeman,

  You can ask your question in the TechNet next to all the script help forum:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• not enough space on the recovery partition

  I get a balloon saying that I have a not enough space on drive D: I disabled the system restore and monitoring of training. It's the recovery partition and I don't write at all to it. It gets real boring. Any suggestions will be appreciated.

  These articles describe how to remove the warning.    Unfortunately, this looks like an approach all or nothing and cannot be turned on/off by the device.

  'Description of the Notification in Windows XP low disk space'
    <>http://support.Microsoft.com/kb/285107 >

  "How to remove the warning of low disk space.
    <>http://support.Microsoft.com/kb/555622 >

  HTH,
  JW

• Not enough space on XP

  I received a message of not enough space on the local disk C. I deleted many files and programs to free up space, but I still receive the message. And local drive D is empty. I am running XP Edition family.

  Hello

  Thanks for posting in the Microsoft community! If I understand correctly, you receive error disk low space on the local drive.

  1. don't you make changes on the computer before the show?
  2. when exactly you receive error message?
  3. What is the brand and model of the computer?

  Try the steps of troubleshooting provided by the methods and the Coachman.

  Method 1:
  You can perform a disk cleanup and verify.
  Description of the tool in Windows XP disk cleanup
  http://support.Microsoft.com/kb/310312
  Note: When running clean disk you may lose files that are not used for a long time. Microsoft is not responsible for the loss of this data.

  Method 2:
  System Restore takes up to 15% of the total capacity of the hard disk, you can try disabling the system restore and check.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084?WA=wsignin1.0

  Method 3:
  Step 1: Check if the problem occurs in safe mode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode then, you can perform the clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 3 in the article above.

  Method 4:
  You can see suggestions from the knowledge base article and check.
  Description of in Windows XP low disk space Notification
  http://support.Microsoft.com/kb/285107

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

  If you need further assistance, please answer and we will be happy to help you.

• Why I see Runtime Error R6016-not enough space for thread data?

  All of a sudden when I try to launch Google Chrome, I get "error R6016-not enough space for thread data? ' like Chrome stops. Plenty of hard disk, disk defragmented, no viruses or malware. Never seen this message before.

  I think you're on the right track to reinstall Chrome... but they have a method of choice for the best results and that the information is here:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=111899

  Just FYI, running sfc/scannow won't help, but it will waste your time and you will not be able to determine which file is causing the problem because...

  When sfc/scannow runs successfully, you will see a start and complete message in the Event Viewer log system.

  It can take a long time to run and slow down your system.  When it starts and stops correctly you can only see events like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64016
  Analysis of file File Protection Windows has been started.

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64017
  Windows File Protection file analysis completed successfully.

  There is no information about what he did or what he did not.

  Even if sfc/scannow finds something to do, you will not know about it.

  That's why try again more than a waste of time.

• Not enough space for DB - formatted - now FAT is corrupted

  I received an error message after the music to transfer to my Sansa Fuze.  The message indicate that there was not enough space for DB and supposed to free 90 MB.  I have read the instructions on the website and formatted the drive.  Now, I get an error message saying that FAT is corrupted and say to connect it to the PC to get FAT.  I reconnected it to the computer without modification.  Then, I downloaded the firmware zip file and uploaded the file on the disk.  Still no change.  Please notify.

  You can try the player formatting MSC mode.  To connect the player in MSC mode, with the player to the wide, slide the switch down to the locked position (you will see an orange color it), and then press and hold the< or="" back="" button="" while="" you="" connect="" the="" fuze="" to="" the="" pc.  ="" you="" may="" have="" to="" continue="" holding="" the="">< button="" down="" for="" a="" while="" until="" you="" get="" a="">

  If the computer recognizes the player in form through the computer.  If your drive is a one, fornat 2 GB as FAT.  For a 4 GB or 8 GB, formatted in FAT32.

  If it formats correctly and the drive does not operate normally, reformat through the player settings to optimize the memory.

  Another thing, sometimes the 'diskspace for DB' message appears due to a bad music file (s).  You can check the files that you have transferred before the trouble began.