Not found battery

Similar Questions

• T450s - 2nd DIMM shows empty and cache-battery is not found

  Hello

  My Thinkpad T450s of September 2015 not found my second RAM installed.

  For months, everything was fine and the t450s was very fast, but from one moment to the other, it was very slow.

  TIS was a missing RAM stick... She went from 12 GB to 4 GB.

  Also if I supported something ditch USB when the laptop is the turn of and I turn it on, it can not find the installed batteries (even when it is not powered by AC)

  Someone who knows how to fix this?

  Assuming that your machine came with a warranty, a service call.

• Satellite Pro L500-1 t 5 - does not recognize battery

  My new Ii received only today) computer laptop Satellite Pro L500 does not recognize the battery. I can't turn it on without AC. When the AC is turned on, the battery LED lights up orange for 20-30 seconds and then turns off, and Windows 7 says, that there is no battery.

  I read on this forum, that I can put my battery in, while the windows is already happening and I tried, he founded the battery for 20-30 seconds and starts to load, but that she doesn't even once is not the battery. I checked the BIOS version, 1.90. It's a more later, as I understand it, isn't?

  What can I do with it? It's hardware problems and I should post in the service or can I fix it somehow?

  Hi Ponny,

  What happens if you leave the AC adapter plugged in for 24 hours or overnight and then you start the laptop without an AC/DC adapter? On the first charge, it takes a little longer until the battery is fully charged.

  If that doesn t work, you need to contact the store where you bought it or authorized service provider. In this case, you should get a new battery free.

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• HP mini110-3603tu: operating system not found

  Hello.! The problem on my laptop is the following... An operating system not found. Try disconnecting all drives that do not contain an operating system. Diagnostic system says BIOS Application error 501. If I press F11 for recovery system nothing happens.
  Pre intalled windows 7starter then upgraded to windows 10home, then decided to return to windows 7, run a system restore and then the battery went down. So what is happening. Please help, thanks

  Wow, so that's how it is. Thank you so much for the great help.

• Error operating system not found Message notebook Compaq Presario F700 {756CA}

  Hello, thank you for this forum!

  Record: Series of laptop HP Compaq Presario 700 {756CA} 32 Bit OS wireless

  ID # #ABC Serial # under the direction of the security KP027UA

  1 I used a service tech, as a gift, the Dec23/10 online. Problems occurred during the 5 hour session. PC was going well in advance.

  2 on PC Dec25 would not start. Operating system not found message that appears. Used F8, last known 5 times and it no longer works. Put into service on battery 4 times. It no longer works.

  3 a written tests HP for operating system not found {but was for XP and WIn2000}, with drive to test the hard drive. Message adjustment but

  other areas didn't have so not.

  4 related to Vista and Win 7. It's for the boot drive address not found Error Message.

  This message comes not so much waited and did as below.

  5 performed a full scan on MBAM, program no. threats 6 Ran Reimage and 2800 + corrupt or missing files found and repaired. This did not help and used the battery when you restart.

  7 when the open PC Windows updates were parties and 71 had to be installed. Had to use battery or reboot.

  8 new updates have shown, once again. Installed 8 and 1 failed. {Windows PowerShell 2.0 and 2.0 WNRM, optional}.  Could not start on more then ran battery test the boot drive HP fix error.  Test the Test of the Bios and the hard disk does not appear to work correctly according to the instructions, but normally open when you restart PC. I'm afraid to stop PC again.

  Questions: 1. can you please help with the BIOS and hard drive tests for my PC?

  2 HP support assistant has always shows failure of updates, analysis and data collection. Why?

  The downloaded program beginning Jan/11

  3 the event viewer displays error messages for updates and contact HP. examples: 134 CPU device breaks down... server windows could not start the process of some updates. What can we do? It comes after new updates.

  4 I want to uninstall the online tech company and all of its files, etc. Should I use REVO uninstaller. ? Windows Defender shows ports and exceptions for several parts of this program. I have to uncheck them?

  5 my adapter is bent at 45% s. This could be part of the problem?  The light is on.

  Your help is very appreciated. I'm at a loss and a user of learning with hours and hours of reading.

  Best regards, athome34

  athome34 wrote:

  Hi, thank you for having responded to my recovery options questions.

  Now, I realize that I did back up discs.

  Questions: 1 Will the Recovery on my PC option return it a 'new' State of the Vista operating system? Yes

  2 I'll Ineed to write important information from the. August 2010 back up? Yes

  3 Aug 2010 will save the files back of disks, programs and my Anti etc on my PC virus program? Must restore all the files and the settings. You must reinstall the anti-virus first.

  3 are Recvovery HP discs this duplicates what was first installed PC? Yes

  Thanks a lot for your help.  Congratulations!

• Microsoft XP blue screen and message - this applicationhas failed to start because LSASRY.dll was not found, that reinstallation can correct moyenessentiel,

  no disc recovery... on a Panasonic Toughbook CF-50

  Let's see...

  If you see a message like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because lsasrv WITH. DLL was not found.  Re-installing the application may fix this problem.

  Then, when you click OK, you have nothing more than a mobile mouse cursor.

  I seriously doubt that the opinion of the engineer of Microsoft Support for try the last good known Configuration will replace a missing file, so that theory approaches the area of ridicule.    This is not what LKGC, that is not what he does and is not how it works.

  Re-installation of XP is a very bad idea.

  There is also no need get a Windows XP installation CD, because you can create a bootable XP Recovery CD yourself and then see to replace the missing file.

  I understand not all next to a Microsoft representative.  Obviously not tested, won't work, won't help, but there are the necessary links to an article.   It's just another MSE wild-goose chase.

  The lsasrv.dll file should really never be missed, so answer these questions as the best yo can:

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Then at the Recovery Console prompt enter orders to replace the missing file from backup copies that are already on your system:

  Copy c:\windows\system32\dllcache\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Depending on your system configuration, you may need to copy the files somewhere else, so if they are not in the folder dllcache for any reason, enter the command like this:

  Copy c:\windows\ServicePackFiles\i386\lsasrv.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Remove the CD and then type "exit" and restart your system.

• Bluetooth not found

  Hello

  HP envy m6 1125dx, win8 64bits

  I have the pc mentioned above for about a year now and always worked well.

  I recently bought a parrot Zik bluetooth headset.

  I had never used/looked for bluetooth on the pc before today.

  I paired the headset with my phone, no problem at all.

  Then, I tried to pair the headset with the pc.

  The bluetooth icon is not found... and I don't remember ever having seen...

  I go to the control panel > Device Manager > network adapters and I see that there are no installed Bluetooth adapter...

  Then I open the service.msn file and I see that the 'Bluetooth Support Service' is running...

  How can it work with no driver installed?

  So far I have tried:

  1. a hard reset of the pc (power off, unplug everything, pull battery, press the power button for 20 sec, battery in, pc Tower) did not work, still missing a bluetooth icon and in pc settings > wireless the option to enable or disable the bluetooth is not there.

  2 tried to install the following drivers, sp60480.exe, sp58944.exe, sp59207.exe, sp59021.exe and also www.Thomson-Broadband.com SetupBtwDownloadSE.exe

  Once again, no luck. None of the drivers even installed...

  Any ideas on what could be wrong?

  Should I just get an external usb Bluetooth adapter... ??? If so, any suggestions on which one?

  This is a * beep * expensive pair of headphones and I hate not being able to use...

  Don't think it's important, but I bought the pc in the United States but I live in Italy.

  Thank you very much

  Hello:

  According to the specifications of the product on the link below, your specific model does not come with BT that's why nothing works for you.

  If your model comes with BT, then he would have been listed next to the section of wireless connectivity.

  http://support.HP.com/us-en/document/c03489413

  You could either buy an external USB BT adapter or look in your owner's manual for a card combo WLAN/BT to buy support.

  If you decide to do the latter, you can buy only one of the maps in the manual and it must have the HP part # on it or it won't work.

• have the boot device from Windows 7 - laptop screen - black - not found -.

  Compaq Presario screen - Notebook PC - black, start the device not found - install an operating system on your hard drive - hard drive - (3FO)

  Did you try what is called a "Hard Reset"? It is 1. Withdrawal of all devices such as printers. 2. disconnect the power supply input cable. 3 remove the battery. 4 press and hold the power button for 30 to 60 seconds. 5. reconnect the power cable and install the battery. 6. power on and boot mode safe (assuming that the screen comes alive). I read a post from someone who said he had to go through this procedure 3 times before their recovered laptop but I found my laptop recovers with a reset, as described. I have, however, to do this twice

  in recent weeks, but I can't find any explanation as to why this error occurs. If someone can tell me I would be grateful.

• operating system not found vista Home premium

  system won't boot operating text not found on hp dv9715nr go to recovery backup open the window find program called restore7.exe with no editor afraid to use it don't know what it is

  Look here: looks like the system files are corrupt, try KB 927392 to repair startup problems, also, could be the failed hard drive (check the bios sees it) or cmos battery.

  Here is a link to KB 927392, http://support.microsoft.com/kb/927392

  See you soon

• "Realtek network controller is not found" - various measures already taken

  Hello

  GA B75M - D3H Mobo rev 1.1

  Windows 7 Home Premium SP1

  Intel Core i5 - 3570 k @ 3.40 GHZ processor.

  16 GB GSkill ram

  There is no "network card" listed in Device Manager more. I turned it on and it was gone and a not to connect to anything. No other material changes, no software changes, no damage.

  I selected "Show hidden devices", he showed "Realtek PCIe GBE Family Controller". Disable was gray and under properties it says that this device does not work correctly because it is not connected.

  I read online and decided to uninstall the driver with the hope that by restarting the computer would work. He did not. I reinstalled the driver, it says

  The RealTek network adapter/controller was not found.
  If the active deep sleep Mode please connect the cable

  I had initially it say "Findfile failed" but I fixed using separate drivers instead of the ones on my motherboard drivers CD.

  I have:

  Tried to reinstall the drivers.

  "The RealTek network adapter/controller is not found.
  If Deep Sleep Mode please connect the cable"

  Power off the PC, remove the battery CMOS and RAM, power cord unplugged and waited 45 min, pressed the power button, replaced the RAM, the Cmos battery and power cord and return the computer.

  The BIOS to the default value of the optimized parameters.

  Updated the Bios of the site of gigabytes using @Bios. This has been a success, but has not fixed the problem.

  Check the BIOS of the controller. Under device it lists 'Lan Controller #1'. It has been activated. I disabled started, stop and enabled and started. Not more than anything.

  I installed the Realtek Ethernet diagnostic utility - it shows that nothing there so he could diagnose.

  I updated the drivers for chipset provided by Gigabyte and I updated the Intel Management Engine Interface. These were both successful, but has not fixed the problem.

  Note: I don't have anything that is listed under "Network adapters" in the Device Manager. Viewing hidden devices shows a variety of things listed here as "WAN Miniport" and "Card Microsoft 6to4", but none of these are a real network card.

  System Restore is not an option. Thanks for your help.

  Richard

  I don't think that you had corrected the post as the answer. People with the power to do have a bad habit of marking messages as the answer, particularly when the poster is an engineer/Microsoft, when clearly the question was not answered at all.  You may be able to uncheck the post that you are the original poster. You actually answered your own question, and it must be marked as the answer.

  See you soon

• BlackBerry Smartphones module manages 2126 not found

  Hello

  I downloaded the Blackberry World update on my Curve 8900.

  When I try to start it, I get the following message:

  handle to the module not found 2126

  Your help would be much appreciated. Thank you very much.

  Boyar

  Do a hard reset first (remove the battery and sim, replace after 1 to 3 minutes)

  Then try to access the BlackBerry World again.

  Good luck!
  ___________________________________
  Click 'Like' If you want to thank someone. If the problem is resolved to accept it as a 'Solution', so that others can use it.

• Smartphones blackBerry 'not found search location.

  Is anyone know why this dialog box. Search location not found"continues to appear every time I have to travel on my 9670 flip phone? BTW, I know that my phone is old, it is even more figure on the list of the devices on this site; However, I like the small size & I don't "booty-dial" anyone... But this current issue is inconvenient & distracting. What can I do to make it go away?

  It appeared all day July 7, until what I took out the battery & it left aside for a while. Since then, I have not had a problem (weird?). And no, I had not knowingly tried to access all the associated gps apps, at least not during a week before. But thanks for the reply. I hope that this will not happen again.

• Wireless disconnect all of a sudden and then adapter is not found until the reboot!

  I am currently using Acer Aspire 4740 G with Windows 7 Home Premium. Previously, the problem I encountered was that the wireless card is not found when you turn on the laptop with the battery. The problem could be fixed by restarting until the adapter is found, or just plug in the power cable.

  Recently, the problem has gotten worse. Even when it's current alternative, my wireless connection will suddenly shut off and then the adapter is not detected until the reboot. In network connection, the adapter is shown, but it shows disabled. When I click on him allow, the popup notification enabled but in the network connection is still disabled. When I try to uninstall the card and try to install it back, the adapter is gone until I restart.
  They follow methods I've tried.
  -Under the management of the power of the adapter, I unchecked "allow the computer to turn off this device to save power".
  -Using a power high performance
  -Updated my wireless adapter for Qualcomm Atheros AR5B93 v10.0.0.234 (do not know what is the most recent, can anyone verify this for me?)
  The only way to solve the problem now is to restart the laptop. However, the problem will occur again in about an hour or 2, but it's embarrassing!

  Not sure if this helps, because my problem seems to be fixed now.

  I have been uninstalled Tuneup Utilities. I remembered before installing Tuneup, the problem occurs only when my laptop was disconnected and running on battery power. After the installation of Tuneup, this occurs even it is plugged. Looks like than Tuneup messed my network or power management.
  Thank you guys for trying to help anyway.