Not found wireless connection

Similar Questions

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• TECRA R850 - not found wireless network controller driver

  Hello

  I reinstalled my computer, since then it does not recognize a wireless or network device
  here - after part of the result of the Toshiba Diagnostics tool
  Device Manager indicates that:
  "The drivers for this device are not installed. (Code 28)
  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.
  "

  However I can't find the driver, after update of Windows updates, etc.

  Help, please!

  Thank you
  lavver

  Date of 2013/03/15 22:55:35

  [Information on PC]
  Model name TECRA R850
  Part number PT524E-005014BT
  Serial number 4B021792H
  Version of the OS Microsoft Windows 7 Professional 6.1.7600
  Version of the BIOS Version 3.60
  CPU Intel Core i5 - 2410M 2.30 GHz CPU
  Memory8192MB physical RAM
  Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
  Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
  Video version Intel(r) HD Graphics Family = 8.15.10.2291
  Resolution1366 x 768 Pixels screen
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 6.0.1.6271
  Display Audio Intel (r) version = 6.14.0.3074
  Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
  HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
  Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
  Internet Explorer9.0.8112.16421
  IDE Device Hitachi HTS723232A7A364
  CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version

  [Diagnostics results]
  CPU TEST DOES PASS
  MEMORY TEST DID PASS
  Enhanced Host Controller - 1C2D)
  Enhanced Host Controller - 1 26)

  i.LINK TEST IS NOT FOUND

  Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out please.

  This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• module not found wireless (701)

  Please, help me to solve this problem.
  After that I did the diagnostic system, I get message "wireless module not found (701).
  and when starting my laptop, the screen just showed HP logo and start back to the HP logo.

  Hello

  Please try this.

  Disconnect the power sector and battery that no accessories must be connected to your laptop. Then press and hold the power button on your device for 15 to 30 seconds then plug the battery & power checking if the unit works fine.

  If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

• HP 15-d017cl Notebook PC: not found wireless device. No seriously, as * gone * not found.

  Earlier today, I was using my computer to access the internet (was simply looking at Facebook, nothing special) and suddenly my computer crashed.  He had a quick error on a thread in the driver or the device or something like that.  When the computer is restarted, option wireless connections would not pop-up, just ethernet.  So after a lot of Troubleshooting Wizard and pressing this button small adapter wireless without success (the red light was on it all the time, which is routinely), I checked the settings, but while the 'airplane mode' section is very well and has the small cursor to activate, and devices 'Wireless' below says "we found on this PC wireless devices."  Well, of course there should be some.  I tried a bunch of things:
  
  -Went to the Device Manager and clicked on network adapters.  RealTek PCIe FE Family Controller is the only element here, I take it is the connection to the local network, as is anything that works.  Under Human Interface devices, he has HID compatible wireless radio controls and driver HP wireless button.  They are both updated and according to the properties, work correctly.
  
  -Use Windows Update to check for updates, install and reboot.  Nothing new.
  
  -Use system restore to go back a few days.  Nothing new.
  
  Next option I could think would be to restore the driver of HP wireless button (HID-compliant doesn't have the option), and if it does not, an another system restore or reset.  I hope not to have to do, because it's going to take a lot of work and a shopping spree, I have all the pictures of my two years since he was born as well as a whole bunch of programs, not what I think I have the program CD for more (my husband had some items stolen awhile back).  I'd love for more suggestions, I've been working on it for several hours and my brain hurts.

  Hello

  Try to update the Bios and the last pilot wireless from the HP website.

  Where you're comfortable, reinstall the wireless card once to the back side of the device. If these two options do not work, I would say to replace the wireless card as it is may be defective.

• Not found wireless module

  I have usuing a G60 laptop and my product number is VM084UA #ABA and my OS is Windows 7 64 bit. Suddenly, I could get my wireless to work a few hours after using it all morning. Unfortunately, it seems that many people have encountered this type of problem.  The wireless "bars" icon will not be displayed in my taskbar, even with an 'X' through it to show that it is the beginning. I can't find my home network, or any network near the network sharing Center, so I don't see a connection only available broadband.

  I ran the diagnostic troubleshooting and everything he says, it is that I need an ethernet cable, which is quite unnecessary.

  I tried to activate the wireless button blue/orange, Windows Mobility Center and HP wireless assistant. The rest button always orange and has no response. I clicked on all the shortcuts that I could find to access the HP Wireless Assistant, but nothing happens and it won't start. Mobility Center is completely missing the icons located in this FAQ, and the drop-down list HP Wireless Assistant has only 'Settings' and "WLAN off the coast", with "WLAN on" nowhere in sight.

  I have restarted my computer several times, pulled the battery, installed all updates I could find, uninstalled them, restored system, restarted my router (even if other computers are very well pick up wireless), run several virus scans, captured in trawl by statutes wireless on HP support site and a bunch of forums and came up with nothing. When I installed a new version of the BIOS, however, after I restarted my computer, he told me that the wireless module was not found and to access certain parts of the HP site, I was only able to write half until it went off the screen. Then I looked at my drivers and I couldn't find WIFI or Bluetooth anywhere. I have found that the RealTek PCIe FE family controller, which I don't know has nothing to do with the wireless adapter. I feel that it has to do with ethernet, which works very well. I tried updating my drivers, but they took too long to find the updates, so I assumed that there were not all and it cancelled.

  The only step I can think is rip my computer and check if some piece of hardware has melted or something. Is there anything else I should check before resorting to that?

  Thank you.

  Ah, nevermind, I managed to find a solution while watching others around this forum.

  I fixed it by doing a hard reset. Turn off and unplug everything from your computer, and then remove the battery. Press on and press and hold power for about ten seconds, and then restart your computer. Now my wireless is back. Hope it will be useful.

• can not see wireless connection status

  I struggled for the last week. For some reason I'm not able to see the network connection icon in my system tray/task bar. Apart from that, if I click with the right button on the wireless connection in the network connection and try to view the status, it shows nothing. I tried to change the notification in the taskbar area property partners as well as the wireless network connection properties. I think I've looked everywhere. I hope to post on the forum of microsoft would be useful.

  Reference:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_dc_show_icon.mspx?mfr=true

  http://www.TomsHardware.com/Forum/100977-45-notification-area-working-properly

• Computer displays not available wireless connections

  I'm trying to connect wirelessly to the internet but my computer says "windows cannot configure this wireless connection" and it does not show my options for internet connections! "If you have enabled another program to manage the wireless connection using this software" and it gives me code 871122

  Hi JesusMontoya,

  You can read the following article that should help you to solve the problem.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Not found wireless Assistant

  I lost my wireless (Windows XP).  The wireless network wizard is missing.  I have re-installed which and the driver for the wireless connection.  It worked, but then the next day when I turned on the computer they disappeared again.  I tried to reinstall it again, but it still does not work.  A year or two ago what happened and I took it for repair and when it came back, I was told that everything that needs to be done has been hit the letter 'F' buttons on the top line, but I don't remember what "F #" to use and if I need to do something else.  Any ideas?

  Hi Missmelis7,

  Thanks for posting. What wireless network wizard you speak and who makes it? Also can you let me know the make and model of your PC or laptop, so I can locate the latest driver? Finally you can check and see if the network card is detected by the system.

  To do this.
  1. click on start
  2. right click "my computer".
  3. Select 'manage '.
  4. in the left pane of the window, select "Device Manager".
  5. in the right pane, navigate and open "network adapters."
  6. Please let me know what cards are listed here.

  Hope this Helps. I would like to know what are your conclusions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Get an error "unable to locate component: this application has not start becauseATL100.DLL is not found" when connecting to internet

  * Original title: ATL100. DLL PROBLEM

  Please help me I am disabled and do not know much about computers. I just tried to connect to the Internet and there was a connection problem. The message came from mcagent.exe impossible to locate the component: this application has not start becauseATL100.DLL was not found. Reinstalling the application may fix this problem. I have no Internet and I don't know much about computers. I need my pc to take care of me, it's my connection to the world. Please help me. I also continues to receive a message from McAfee that my computer is in danger (real-time scanning is disabled)

  Delete all McAfee software! Then it will not work! Then reinstall the McAfee software. I had exactly the same problem: during the process of removement, I have immediate internet access... Good luck!

• My HP Laser Jet MFP M276 NW 200 6D5D2D will it not ' s wireless connection!

  My HP Laser Jet MFP M276 NW 200 6D5D2D will it not "s WiFi!..."

  I've been thrlough all the doci\umentation but have not found the option to update about it "s".

  ' screen!

  Hi Lee3,

  I understand that you are not able to configure the printer on the wireless network. I can help you with the installation.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• printer is not found when connected to the router with the ethernet cable

  My c6280 used to print wireless (not a wireless printer) because I had hooked to the router.  Now, it won't work - I'm on Mac OSX Lion.  I tried to delete the printer and reinstall.

  Hello

  Please make sure to remove the software completely, because there is no plans for Lion.

  While the printer is connected to your network,

  Go into System Preferences > print & scan and click on the sign more.

  Select your printer and the driver will download automatically the Apple software update.

  For more information, you can follow the document below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails to install Apple servers, download and install the package of the latest version of the HP to Spple printer software:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  After completing the installation, add your printer as explained previously.

• VCSE-VCSC-TMSPE-AD, always get 404 not found for connection movi

  Hi, Experts.

  Location:

  VCS-control: X7.2.1

  VCS-Expressway: X7.2.1

  TMSPE: 13.2.1

  RE: Windows 2K 3

  By VPN, movi user can connect to VCS-C(which integrated with AD, so user authentication in AD), but without a VPN, by VCS - E, movi user cannot connect.

  VCS - E a static NAT to a public IP address with all the necessary ports open.

  VCS - E have minimum configuration to factory default as below:

  1. name, IP address, DNS, NTP

  2. create the SIP domain, enable SIP

  3. create VCS - c TraversalZone, and h.323 and SIP connection was estalished, shown as green indicator

  4. create the link bandwidth needed across all areas

  5. create a rule to search for courses, the target value for any alias traversalzone

  6 political authentication of all areas the value "do not check references" defaultZone, defaultsubzone, traversalzone

  See below for logging I capture VCS Expressway, she always get back with 404 not found error message:

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 448"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 401, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 449" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 401 Unauthorized

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 7ea25e18118002bd

  Server: TANDBERG/4120 (X7.2.1)

  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", stale = FALSE, algorithm = MD5, qop = "auth".

  Content-Length: 0

  |

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Authorization: Digest nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", realm = "TraversalZone", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", algorithm = MD5, uri = "sip: 172.16.5.10:7001;" transport = tls", name of user ="exampleauth", response ="5424b23056e3408bb7c5057ca8921cba", qop is auth, cnonce ="32d6888de492c717c771f89e4b9931e3a4dd3090380a925b76349acf62b7", nc = 00000001

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 453" Module ="network.http" Level = "DEBUG": Message = "Request" method = "POST", URL ="http://127.0.0.1:9998 / identification/name/exampleauth information" Ref = "0x460b500".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.http"Level ="DEBUG": Message = 'Response' Src - ip ="127.0.0.1"Src-port ="9998"Dst - ip ="127.0.0.1"Dst-port = '45146' response =" 200 OK "ResponseTime ="0.003486"Ref ="0x460b500 ".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.ldap"Level ="INFO": detail =" credentials for authentication in identity directory: exampleauth.

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 458"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 200, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 458" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 200 OK

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 2f5366fe32e2f0ee

  Server: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage, path, outbound, gruu

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime =" 2012-11-28 09:22:02, 195"Module =" network.tcp "Level ="DEBUG": ip - Src ="101.85.21.125"Src-port ="51161"Dst - ip ="172.16.5.10"Dst-port ="5061"detail ="TCP connection ".

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 196" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" = "5061" detail = "TCP connection" Dst-port "

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 277"Module =" network.sip"Level ="INFO": Src - ip ="101.85.21.125"Src-port = detail"51161"=" receive the = SUBSCRIBE Request method, Request-URI = sip:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 277" Module ="network.sip" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port "51161" = "

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  Contact: <> [email protected]/ * /: 51161; transport = tls >

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (MCX 4.5.7.16762) - Mac OS X

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.5.7.16762;clientid="7B26CD64-18E7-5443-982A-DD2E496560D2";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  |

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 282"Module =" network.sip"Level ="INFO": Dst - ip ="101.85.21.125"Dst-port ="51161"detail =" send = 404, method = SUBSCRIBE, To = sip response Code:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 282" Module ="network.sip" Level = "DEBUG": Dst - ip = "101.85.21.125" Dst-port "51161" = "

  SIPMSG:

  | SIP/2.0 404 not found

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161; DefaultZone = ingress-box

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />; tag = 709c4dfeda5f3666

  Server: TANDBERG/4120 (X7.2.1)

  WARNING: 172.16.5.10:5061 399 'political response '.

  Content-Length: 0

  |

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 295" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" Dst-port = '5061' = "TCP connection is closed" detail "

  Hello

  you mention that the VCS-E is behind a static NAT. The VCS-E has the option of two Network Interfaces key installed, and if this is the case, do you have properly enabled and configured the static NAT configuration on the VCS itself, on the system > IP page in the web interface of VCS?

  This option key is required when you deploy the VCS E behind a NAT, you can find more information on this in Appendix 4 of the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

• Computer is not identify wireless connections

  Hi I just did a clean install of windows 8. and it's that do not identify the wireless connections. It is just saying 'no connection' when I have a router that is connected to my desktop computer

  I've been through with the network of controllers so that I get wireless... Finally... I just get the 3D and the PCI