Not ios10 blocking VPN PPTP connections through personal hotspot?

Similar Questions

• Devices not recognized unless it is connected through a USB expansion port

  Came to use a scanner that was not used for some time and unrecognized device.  Tried reloading drivers, but still no good. Bought the new scanner/printer combo, but not recognized after loading software.  Finally managed to make it work via WiFi. Thought, I'd better try another material... iPOD touch... "unrecognized ', Sony e-raeder..." not recognized '... panic!  Has finally got the devices to be recognized by the connection via an expansion Belkin 4 port hub.  Any ideas on how to solve the problem of USB ports not recognize my hardware when connected directly.

  Have you tried to update the drivers from the chipset manufacturer of PC or motherboard manufacturers websites?

• ESXi host have not of virtual machines when connected through vCenter

  Hi all

  I am facing a problem with 1 ESXi hosts. All other hosts are working properly.

  All hosts are managed by vCenter 5.1 VM. When I select this problematic host in vCenter and click on the virtual computers tab, it does not display anything other than a blank page. Then, it throws an error saying that the object has been deleted or has not completely created. The screenshot of the error popup is attached.

  However, if I connect directly to the host through the VI client, it does not throw the error and I can see the virtual machines it. If I have vmotion the vms during this host, I do not see these virtual machines via vcenter but I connect directly to the host and I can see the virtual machines. They work very well.

  What could be the cause of this problem.

  Thank you

  AG

  I would try restart the management agent on the host troubled or removing of vCenter and time.

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.

• because no known reason adobe insisted he did not now, I did not recognize my password, I connected through giving my cell phone number and receipt of text with a number of recovery well until I noticed an unknown number of mobile within the message (4477

  LOOK AT THE MESSAGE TO ROY WALTERS, IF YOU HAVE A SIMILAR EXPERIENCE, TRY ADOBE SAY!, IF YOU CAN TELL THE WORLD HOW. R.K.W.

  Hello

  Please see account Adobe ID and login troubleshooting

  Hope that helps!

  Kind regards

  Sheena

• my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

  my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

  Check here > share your Internet connection with Personal Hotspot - Apple Support

• How to disable/restrict personal hotspot without turning off the phone's data?

  Web restrictions work well for iphones for my kids.  We use the circle of disney at home, with the circle of disney GO! product to provide a filtering not at home.  (we also use restrictions to disable Safari and don't allow apps, we know to be installed, otherwise, the app store is disabled.)  We are quite draconian parents.  But it's not important right now)

  Turning on personal hotspot on a phone with the data actually bypasses * everything *.  If kid 2 has a phone with no data, but a browser.  Child 1 to an iphone that has locked the web browser of the restrictions on, and is allowed to have data that it can play Pokémon Go, read some wiki apps, and use the iMessage.

  Child 1 turn on personal hotspot, kid2 connects sound phone (or laptop or other) through it and volia! Unfettered internet access.

  IF, however, there is a way to disable the personal hotspot, the question is carefully disappears.  Yes, you can still play Pokémon Go and iMessage is always turned on, but you can't be sneaky.  (please, no comments about how I should trust my children.  I do, but I was once a male 14yo.  full stop.)

  I could disable data completely, but I want to leave some stuff.

  Web restrictions and the browser crashes are a very good start.  And I would have thought that cell parameters (with the personal hotspot OFF) lock would prevent changes.  Nope.  Allows still flipping the switch independently.

  Am I missing something stupid obvious?  (certainly wouldn't be the first time.)

  Cheers!

  -aaron

  Your cell carrier allows personal hotspot for each phone number. Ask them to turn it off for the iPhone you want to not use it.

• I don't see the option for Personal Hotspot

  Dear Sir / Madam,.

  Please let me know why I can not see personal hotspot in my setting?

  If it is not possible to have this option, how can I share my network with someone?

  Thanks in advance

  Best regards

  Emilie

  Hi Sameneh...

  Follow the instructions in this article to support > share your Internet connection with Personal Hotspot - Apple Support

• iPhone personal hotspot works only with the new Windows 7 PCs

  Old laptop with Windows 7 would always connect iPhone personal hotspot using the USB cable. Tried to do the same with the new laptop and nothing. Tried it on a different laptop using the USB cable with the same phone and connected.

  • iPhone personal hotspot is activated
  • USB cable connected
  • Reset the network on iPhone [according to the suggestion of Apple forum]
  • Tried troubleshooting via Windows
  • IPhone enabled drivers in printers and Windows devices and driver date is 06/21/2006. I have tried driver update and Windows says that the best driver is installed
  • Network discovery is on
  • Public is the profile that I put
  • iTunes was not installed

  How can I fix? Should I delete the current iPhone driver?
  Thanks in advance.

  Installed work iTunes and hotspot. iPhone is a 3G!

• PPTP VPN does not work on Iphone Personal Hotspot

  Hello

  I've just updated to iOS 10 yesterday and now all my devices I use to connect to the personal hotspot on my iphone are not able to establish PPTP VPN connections. I was aware of the PPTP client are disabled in the iOS, but has actually blocked PPTP are not used by devices that connect to the Personal Hotspot?

  Please help ASAP, I know there are many more end-users like me having the same problem.

  Hello

  Apple does not recommend using the PPTP protocol for secure and private communication.

  iOS 10 and macOS Sierra intentionally delete a VPN profile PPTP connections when a user upgrades from their device.

  Apple recommends using another VPN protocol which is safer:

  More information:

  Prepare for removal of PPTP VPN before you upgrade to iOS 10 and macOS Sierra - Apple Support

• A connection VPN (PPTP), who worked previously no longer works.

  original title: VPN works not

  PROBLEM:
  
  I'm running Vista 64 Ultimate SP2, with all Microsoft Updates applied.  My original CD is pre - SP1.
  A connection VPN (PPTP), who worked previously no longer works.
  I think that the problem is related to an installation of Virtual PC or iTunes, but I can't confirm either way.
  Unfortuantely, I do not have a restore point dated to before the problem.

  DETAILS OF THE PROBLEM:
  
  When I'm viewing the network drivers in Device Manager, the following drivers displayed an error:

  Miniport Wan (IP)
  Miniport Wan WAN (IPv6)
  Miniport Wan (Network Monitor)
  Miniport WAN (PPPOE)
  Miniport Wan WAN (PPTP)

  The error for each text is: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  The following drivers do NOT display an error:

  Miniport Wan WAN (L2TP)
  Miniport WAN (SSTP)

  SOLUTIONS ALREADY ATTEMPTED:
  
  Uninstalling Virtual PC has not solved the problem.
  Uninstall device drivers and re - install it as described in the following web pages did not help the problem:

  http://www.chicagotech.NET/NetForums/viewtopic.php?p=988&SID=39aeb8e5e43c459
  http://www.howtonetworking.com/Vista/rebuildminiport.htm
  http://www.experts-exchange.com/software/System_Utilities/Remote_Access/VPN/Q_24291900.html

  In general, I am able to uninstall device drivers, but re-plant fails (sometimes reported as successful, sometimes not).

  I have presented a problem report on the failure of resettlement of Microsoft (including the following in the log files), but have received no solution:

  DMIC8E.tmp.log.XML
  LOGC9F.tmp
  netrasa.inf
  Setupapi.app.log
  Setupapi.dev.log

  I noticed that the device (loser) of WAN Miniport (PPTP) lists two files: 'ndistapi.sys' and "raspptp.sys", of which the first is NOT digitally signed, but the second is.  However, the peripheral Miniport WAN (L2TP) (work) lists only one file: "rasl2tp.sys" which is signed digitally.  This brings me to the question if my netrasa.inf installation file is currupted. (?)

  Any help would be greatly appreciated.  I am technically competent and can deal with editing the registry, etc, but need a plan of attack.

  Thank you!

  -Tad Richard

  Hi Tadrichard,

  Thanks for choosing Microsoft answers Forum.

  Is there an error when they try to establish the connection, if so, what is the error?

  Are there errors in the event logs?

  Forward for you help.
  Kind regards
  Support of yama - Microsoft.

• E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.

  I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.

  I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.

  While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.

  abandoned,

  Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.

  Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!

• VPN connections are suddenly trying to connect through a non-existent modem instead of wireless.

  I have several set up VPN connections that I use for a few months. Today, I tried today to connect to one of them and realized that the dialog box connection said dial instead of connect. It is now trying to connect through a modem, which I don't have.

  I deleted the VPN configuration and set up a new, but I get the same thing. When I go into the properties of the VPN connection, for 'connect using', he says 'deleted Modem - (unavailable device). There is no option to select the appropriate device.

  I have no idea what this happened, but I connect now connect to any VPN because they all are trying to use this modem that does not exist. I can connect to the Internet fine. I can connect to the thin wireless networks. It's just the VPN connections.

  Open IE and make sure the box never establish a connection isCHECKED.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/Neverdialaconnection.PNG

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Block incoming traffic not requested by VPN L2L on ASA5505

  I have an L2L work between two locations. Location A and B.

  Location A: 172.16.16.0/24

  B location: 192.168.0.0/24

  I would like to block any incoming pitch A b location which is not initiated from A location. The block must be done on the ASA5505 location a. location B uses a router ISR G2.

  that is A location can start an SSH session to a server at the point B

  Location B cannot start an SSH session to a server in A location

  I tried to use a VPN on the ASA5505 filter but is not dynamic, I can not pass any traffic during its use.

  Config on my ASA:

  vpn-circulation 172.16.16.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0

  access vpn-local block list extended deny ip 192.168.0.0 255.255.255.0 172.16.16.0 255.255.255.0

  access vpn-local block list extended ip allowed any one

  crypto vpn 100 match address vpn-traffic map

  card crypto 100 counterpart set location-public-IP vpn

  card crypto vpn 100 transform-set esp-aes256-sha

  vpn outside crypto map interface

  Group internal vpn-local-political block policy

  bloc-vpn-a-locales-strategie-strategie of group attributes

  VPN-filter block vpn-local value

  Protocol-tunnel-VPN IPSec

  type of tunnel-group location-public-IP-ipsec-l2l

  attributes global-tunnel-group location-public-IP

  strategy-group-by default-vpn-to-local-blocking strategy

  tunnel-group location-public-IP-ipsec-attributes

  pre-shared key *.

  I also have an AnyConnect VPN for the ASA5505 configuration and it runs 8.2 (5). Any tips?

  Hello

  Unless you already have a lot of VPN connections to use theres also another option other than VPN filter ACL.

  You can globally change the "sysopt permit vpn connection" setting (the default is that this option is enabled)

  If you change this setting to "no sysopt permit vpn connection" every connection from remote site will require an ACL rule on the ACL interface that end the VPN. And it's usually the 'outer' interface

  I find its rules in a way easy and clear of the ACL rules for construction VPN connections also although the 'outside' ACL would now include VPN traffic and Internet. It still beats the use of VPN filter ACL if you ask me.

  The downside activating this later is the fact that if you have no restrections between VPN and LAN connections, you would now determine which must be open before you can change the global settings so that connections don't stop working.

  Here is the section of the overview of ASA 8.2 for the order parameter controls / I do not speak of

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1517364

  If you want to go with VPN filter ACL then follow the earlier instructions of messages while strengthening the ACL rules.

  -Jouni

• iPad 3 will not connect to iPhone 6 personal hotspot

  iPad3 (IOS 9.3.5) does not connect to my Wi - Fi company. My iPhone 6 (same IOS) connects to it (?)

  The iPad has also a very difficult time, connecting to the Hotspot staff Bluetooth on the iPhone.

  I tried to close down, as well, by resetting the network settings, turning Personal Hotspot and Wi - Fi and turn it back on. I can't find anything about it on the support site.

  Hello

  Follow the instructions here:

  Get help with Personal Hotspot iOS - Apple Support