Not like Network Magic more

Similar Questions

• Connected to the internet, but not connected network magic shows

  My network is connect to the internet, both wired and wireless. On the compputer connected by magic cable network shows not connected, but I am connected. Unable to print remotely. Router shows connected but the network card is not.

  Thank you

  After reading your response, I decided to uninstall and reinstall the program. Thought it would be a little easier. I felt that the problenm was that the program had been damaged but hesitate to reinstall it because I downloaded from the internet several years ago and could not find the product key.  I finally found the program cisco and the location of the key and now works. Not as sexy but effective.

  Thank you once again

• Can not activate my Network Magic software after reinstalling

  After a clean install of Windows 8 Pro I installed my Network Magic Software. After installation, I tried to activate my legal version, but it will not accept a connection to save and activate. I discovered that Cisco supports more Net Magic then activation is not possible in the Netherlands. Cisco said that there is no other tool network of Cisco for my WRT-320N replacement and other Cisco devices. Is it possible to activate my Network Magic software in another way (in the United States or in the registry of Windows or Network Magic)? THX Martin

  One of the reasons why software cannot be installed are because of the firewall on your computer or antivirus software. Try to disable the firewall or disable your anti-virus temporarily and activate Network Magic again.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• How do you decommssion a domain controller that has not been on the network of more than 200 days?

  Hello

  in our society, we have an old domain controller has been disconnected for more than 200 days, probably in a State of thumbstone, it still appears in our network. We wanted to know what is the best way of disused this server, we connect to our network and do normal downgrade process.

  How do you decommssion a domain controller that has not been on the network of more than 200 days?

  Could you please write me back to my work email or call me on my work phone? Job information are below.

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• Network Magic is not updated in the computer security software.

  I decided to standardize my security with Microsoft Security Essentials software.  I uninstalled the previous security software (CA Internet Security Suite) and installed Security Essentials on two laptops.  Now, when I look at the Map Network Magic, I have 3 alerts.

  My router is D - Link DI - 624 Rev C Firmware 2.70.  Network magic is c. 5.5.9195.0 - PURE0, version of the 11.2.9195.1 platform.  My cable modem is D - link DCM-202.

  When I discover the details and alerts from a computer, running Vista Home, SP2, it shows that there is no antivirus installed, the spy software is the defender of widows, and firewall Microsoft Windows is installed.  Alerts that I receive from this computer are that the Antispyware is turned off and the Antivirus is not installed.

  When I discovered the details and alerts of yhe other computer, running XP, SP3, it shows that the Antivirus is CA-Anti-Virus, installed no Antispyware and firewall Microsoft Windows is installed.  The alert for this computer, it is that there is no antispyware installed.

  I removed the two computers to my network card, rebooted and re them connected to Network Magic, but the sill of alerts are displayed.

  How can I get Network Magic to report the correct security software installed on both of these computers?

  Hi, MSE was released after 5.5 NM.  Wait for the next update for full support.

• Get codes error like "error 80070005" or "could not access network location" or "internal error" when you try to open Acrobat or itunes or access some Web sites.

  I am doing various codes "error 80070005" or "could not access network location" or "internal error" when trying to access acrobat or itunes or some Web sites or that he was trying to perform certain actions such as uninstalling programs.  Here are some of the problems.  A couple of weeks everything worked very well, now there's something blocking me and it's extremely frustrating.

  Hello

  Make sure that you are logged on as administrator.

  Don't forget to check the antivirus product issues and security as a 3rd party firewall (Comodo, on the one hand, a
  has been known to cause this problem.

  It is a very difficult to solve.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  The problem here is slightly different, although the solution may be the same.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000.
  Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  It is usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I'm trying to uninstall Adobe error could access the network location. I'm not on a network any more

  I'm trying to uninstall Adobe error could access the network location. I'm not on a network any more and need to uninstall it and buy a new

  Hi kristiel49687537,

  Try to use Microsoft Fix it Wizard, available at support.microsoft.com/kb/886549. This wizard updates the Windows registry.

  Warning: Adobe does not support third-party software and provides this information free of charge only.

  If you cannot resolve the problem after using the fix it Wizard see solutions in Error 1606 | Install | Acrobat 8, 9. CS4

  Kind regards

  Nicos

• Network Magic does not recognize Microsoft Security Essentials

  Why doesn't the Network Magic Pro 5.5 recognize Microsoft Security Essentials and how this can be fixed?

  Kind regards

  Johnoni

  Simply apply the button "Ignore that alert" on the alert of the absence of the software Anti-spyware or Antivirus (double click on the alert red see shield in the network on your router image map).

• Network Magic and a network printer

  Hello world.  I have a printer in network (wired, not wireless) and Network Magic (5.5.9195.0 - Pure0) shows this device as something totally different.  See screenshot.  The information is reflected is a laptop that I had before.  The IP address is newly affected (was not in the past).  The printer is a Photosmart Premium printer.  I tried to change the NETWORKLIB. XML file (the entry does not disappear), but the wrong information still appears in the network map.

  Any ideas?  Thanks in advance!

  

  Looks like the NIC may have been impossible to remove the information from your old computer from the network and he attributed wrongly to the printer. to correct the problems of network card, see the article on the basis of knowledge of cisco: of Article ID: 19407.

• Network Magic will work on an Archos Tablet

  Hello

  I'm a # 101 501590 Archos tablet. I want to install Network Magic Pro.v.5.59195 top

  I'll be able to. ?

  I have Network Magic installed on two other computers as computers help a lot.

  Network Magic is a great product to work I am so happy to have found

  Cowan

  I know, the Archos tablet you are talking about runs on Android 2.2 Froyo operating system.  It is not included in the official system required for Network Magic.

  You can try to browse the Network Magic FAQ by clicking here. If you want more information.

• Customization of Network magic

  Hi all

  Is it possible to change/add the device icons. I would like to have icons 'clear' for wired switches and NAS devices. (and something better then 'network device')

  Second: is there a way to customize the network mapped (as in my case, it is false): my network configuration is the following: in the House, I have a few computers/devices connected with a switch. This switch is connected to a switch outside my house and the switch connects with my internet router and some servers. However the card show my central router to my network (with all the devices on it, so I don't see what computers are connected to what switch).

  PS: what I find a great weakness, it's that this Linksys/Cisco software does not recognize one of the devices of his own...

  Greetz

  Geert

  Hi Geert,

  Network Magic does not work with switches, routers only.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• Why would you once on a network appears in the task like network 4 bar and then it turns into network 6,?

  Why would you once on a network appears in the task like network 4 bar and then it turns into network 6,?

  Network 6 is rated a public network. I want only connected to the internet so is that correct or should it be local

  File and printer for microsoft networks sharing has a check in it, it should be?

  One of my grandsons that started a few days ago and I don't know if it is passed something for xbox?
  TKS

  the only shared printer-shows

  Hello

  The number of network cards you have in your computer?

  For example, it might be a laptop computer with wireless card and wireless card, and each of them receives a different number (the number is just a number it does not mean that there are 4 cards more).

  Whether it's a regular network or a public network, must be able to connect to the Internet.

  Public network: connection that may use Public network such as in a coffee with free Internet house safely.

  Jack, MVP-Networking. EZLAN.NET