Not loaded FLV playback component skin

Similar Questions

• FLV Playback component

  Fast forward and rewind on the FLV Playback components buttons do not work as normal. If you have tried to use them, you will notice that they meet a click rather than an event mouse_down event.
  
  By taking a part of the skins, I found that the fast forward clip is forward_mc.
  
  How to create an event listener to the buttons inside the FLV Playback component?
  
  If the instance of my FLV Playback component is called 'film', how it access?
  
  I tried this, but it does not work:
  
  This.Movie.forward_mc.addEventListener (MouseEvent.MOUSE_DOWN, fastForwardDown);
  
  function fastForwardDown(e:Event):void {}
  FastForward film
  }
  
  Thank you

  OK... Thank you. Here's what seems to work.

  If (e.target.name == 'forward_mc') {}
  do what you must
  }

• Start the flv playback component playing mailed paused after n seconds

  I have a component playback flv (vidPlayer) with a set number of landmarks.

  When a cue point is reached the flv playback component stops

  and an externel swf is loaded from the staging. I know that the swf file plays for

  124 seconds. What I would like is for the flv playback component to start

  playing again hence is was suspended at the end of these seconds 124

  [code]

  If (event.info.name == "lit_23") {}

  lit_22.visible = false;

  var Xpos:Number = 94;

  var Ypos:Number = 78;

  var swf:MovieClip;

  var loader: Loader = new Loader();

  Loader.x = Xpos;

  Loader.y = Ypos;

  var defaultSWF:URLRequest = new URLRequest ("colours.swf");

  Loader.Load (defaultSWF);

  addChild (loader);

  component playback FLV stops

  vidPlayer.pause ();

  now start playback position break after 124 seconds

  }

  [/ code]

  Import fl.video.MetadataEvent;

  vidPlayer.addEventListener (MetadataEvent.CUE_POINT, fl_CuePointHandler_3);

  function fl_CuePointHandler_3(event:MetadataEvent):void
  {

  If (event.info.name == "lit_1") {}
  lit_1.Visible = true;
  }
  If (event.info.name == "lit_21") {}
  lit_20.visible = false;
  lit_21.Visible = true;
  }

  If (event.info.name == "lit_23") {}

  var loader: Loader = new Loader();

  Loader.Load (new URLRequest ("smallvideo.swf"));
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, swfLoaded);

  Loader.x = 91;

  Loader.y = 82

  }

  If (event.info.name == "lit_22") {}
  Loader.Visible = false;
  lit_22.Visible = true;
  }

  }

  function swfLoaded(event:Event):void {}

  var loader: Loader = event.target.loader;

  trace ("Loaded")

  MovieClip (loader.content). your_flv_pb_instance_in_smallvideo. addEventListener (Event.COMPLETE, smallVideoFLVCompleteF);
  lit_21.visible = false;
  lit_1.visible = false;
  addChild (loader);
  Loader.x = Xpos;
  Loader.y = Ypos;

  vidPlayer.pause ();
  }

  function smallVideoFLVCompleteF(e:Event):void {}

  vidPlayer.play ();

  }

• Flash FLV Playback component - problem with swf

  Hope someone can point me in the right direction here - try just the FLV Playback component to replace a couple of short videos on a Web site with a version of flash.
  
  I've got the SWF works OK - when I saw in HTML it everything works fine.
  
  However, on the page I have downloaded on my site, it is not and looks like:
  
  link here
  
  Any ideas why not?
  
  I checked, and html, flv and swf files are all downloaded, as is the AC_RunActiveContent.js file.
  
  See you soon.

  Spotted it - didn't know there was a separate .swf for controls.

• FLV playback component problem

  Hello world.

  I have problems with the FLV Playback component in Flash Professional CS5. In particular, I have works perfectly under Flash, I published it and yet when I go to insert the SWF file on my Web page using Dreamweaver CS4 the play with all the controls bar disappears. I am a completely free taught novice so I've probably missed something very obvious, but any help would be greatly appreciated because it is now driving me crazy!

  Thanks in advance

  Let yourself be guided by the server.  It is a random test in DW.

• Possibility of fade the FLV Playback component?

  Is it possible to fade a FLV Playback component? I tried to put it inside a clip, then using the Transition fade in actionscript, but no luck? Is there another way to make the video look like it disappears without using ._visible?
  
  Thank you
  
  
  Julia

  Mind - I got it - never forgot to import the classes from Transition... Sorry...

• Not loading flv movies

  I can't get my flash movies to load my Web page when I upload to my web server. Everything works fine on my machine.
  When I right click on the movie, he said that the film is not loaded and when I click on the error message, it says the following
  line: 121
  Char: 1
  error: 'swfobject' is undefined
  Code: 0

  cjp5555 published in macromedia.dreamweaver

  > I initially forgot the scripts folder. But downloaded from
  > It and then checked as a large part of the code that I could understand
  > and may not know what the problem is. Locally it works fine.
  > The link to the site is
  > spracher.com

  I see not everything related to video on this page. Please provide the
  correct link in the future.

  Digging around, I went to projects.html and I do not see some swfobject
  code at the bottom, but you have no other reference to the video on this
  page. You should be able to remove the JavaScript at the bottom of
  This page.

  And, once I saw your image map link in the code, I went to
  http://www.spracher.com/projects_stunt.html . This must be the
  the page that you are asking about. (this is not an obvious link).

  For example, assuming projects_stunt.html is the page you wanted to see me...

  You forgot to download that and Clear_Skin_1.swf to
  the root of your site. (This should fix project_stunts1.html, too)

  BUT... your server is not set to the correct mimetype for flv files.
  which is a bit surprising for me. Most Apache servers have the flv
  default MIME type. Ask your host to set the mimetype for the .flv
  video/x-flv format files.

  (You may want to recompress at a lower .flv files
  data rate. 1.6 MB/s is quite high for the video channel. You could
  probably get away with 300 Kbps or less.)

  --
  Mark A. Boyd
  Keep-on-Learnine :)

• How do you define the size of a FLV Playback component?

  Here is my code that plays the video:

  Fl.video import. *;
  
  var myVideo:FLVPlayback = new FLVPlayback();
  myVideo.source = "video.flv";
  }
  
  addChild (myVideo);

  How to set the size of the video? I tried "myVideo.videoWidth = 400;" but it gives me an error.

  Thank you!

  If you are the name of the flvplayback component is myVideo, use:

  myVideo.setSize (444,400);  444 corresponding to the width and 400 is the height.

• Stop the flv playback when you exit the current image

  I searched countless forums (here and other sites) and have yet to find the solution I'm looking for (if all goes well, if it exists).

  I have an flv file is loaded by the flv playback component.  Everything works except that the video (and audio) continue to play even after you leave the frame on which is the instance of the component.

  I found a solution that stops the audio using: SoundMixer.stopAll ();

  But the video is still streaming and affect the performance of the site.

  I want to stop the audio and video, which means using the: playbackInstance.stop ();

  However, all of the solutions I've met basically say to add the stop function to all buttons that potentially could borrow the framework with the instance of reading.

  This seems completely tedious and bulky, especially because I have visible navigation buttons from my 'main' swf and MULTIPLE instances of reading I have are found within a swf loaded with its own navigation as well.  By the nature of the design, instances of reading will not always be on the scene calling references will probably trigger errors.  Of course, there are ways to do this with conditional statements, etc.  But it just seems like a waste of time.

  Is there a simple way to call playbackInstance.stop () to navigate away from the current image?  An event to listen to?  I forget one obvious answer?

  I really want to think that there is a more elegant solution than adding so much in bulk to each eventHandler for button on my site.

  Add an event listener for the removedfromstage event.

• Sound does not stop if I released a pre-loaded FLV movie

  I loaded as a "video with playback component rear exit" FLV video in my Flash site. It works great, even fast charge regardless of its size of 15 MB. The video located on labeled section which has a ' X' button that closes this section and takes a user to the page with all the sections of video. However, once closed the section labeled with the video sound is still playing.

  Does anyone know how to stop if the section with the video has been stopped?

  To display this effect please visit my site at the www.888acolyte.com/acolyte24.html

  Go to the how-to section, then click the link "here" for the show 'The Arrangement', it will take you to the section with the video loaded as a "video with playback component rear output" in my Flash site.

  If you use a component FLVPlayback instance (for example, with instance name flv), you can use the text next where the flv is created:

  flv.addEventListener (Event.REMOVED_FROM_STAGE, stopF);

  function stopF(e:Event):void {}

  FLV. Stop();

  }

• Auto/hide with Flv playback doesn't work with javascript lightbox, need help?

  Hello world
  
  I've created a few swf loading an flv file in flv playback and check on the parameter auto/hide. When I test the movie, it works fine. BUT, in my site, I put these swf files in Lightbox (javascript based) and when the mouse passes over the flash video, it shows the Player skin and when the mouse goes off, the Player skin stays on the video! Why? Does anyone has an idea on how to force the parameter auto/hide in this case?
  Thanks for your help
  
  Orlenka

  Found this post while searching for an answer, but not found much elsewhere so I will post my solution quick and ugly here. I'm sure it can be improved, but I didn't have much more than 5 minutes. Note: .visible affecting false just finished what causes the transition from autohide to happen again and again, to remedy this I'm just temporarily spend the whole sprite off the screen.

  (AS3, using the CS5 component... Note that 'player' is the FLVPlayback instance):

  # force "Auto hide" what inactive mouse

  var: timer = new Timer(1500, 0);

  timer.addEventListener (TimerEvent.TIMER, onTimer);

  Timer.Start ();

  var skinSprite:DisplayObject;

  var prevMouseX:Number;

  var prevMouseY:Number;

  function onTimer(e:TimerEvent):void {}

  get skinSprite if have not already

  {if(!skinSprite)}

  var child: DisplayObject;

  for (var i: Number = 0; i< player.numchildren;="" i++)="">

  child = player.getChildAt (i);

  If (i == 2) {//this is the skinSprite

  child = skinSprite;

  }

  }

  }

  Check if the mouse has not moved since the last event of the timer

  If (skinSprite & mouseX == prevMouseX & mouseY == prevMouseY) {}

  skinSprite.y = - 1000;

  }

  prevMouseX = mouseX;

  prevMouseY = mouseY;

  }

  stage.addEventListener (MouseEvent.MOUSE_MOVE, stage_onMouseMove);

  function stage_onMouseMove(e:MouseEvent):void {}

  {if (skinSprite)}

  skinSprite.y = 0;

  }

  }

• I just uploaded a clip of mpeg streams but tells me I can't use it without a mpeg-2 Playback component.  Can you recommend what to buy?

  I just uploaded a clip of mpeg streams but tells me I can't use it without a mpeg-2 Playback component.  Can you recommend what to buy?

  You can use Streamclip for most cases, but to play MPEG-2 files, like. VOB files, and to convert them to other formats, you should buy the reading component QuickTime MPEG-2 for Mac OSX, you can get online from the Apple Store for $19.99.

  However, I am under El Capitan like you, and when I tried to install the MPEG-2 component, I got a message that it could not be installed on my

  disk because the app was for an earlier version of my OS.  I don't know if others have had this problem, but I thought that I could

  mention it to you before you passed the $20.00.

• NB100 recovery disk won't load no-mistake 32768 file PEBASE could not load

  I have a NB100 and when trying to start I get Windows could not start because the following file is missing or corrupt: System32\Drivers\Ntfs.sys

  I have connected a DVD player with the recovery disk GMR400882EN0 product inside and turned on, the start-up, I keep F12 button and I get the options to boot from the CD/DVD key USB HD FDD, I put it to boot from the CD/DVD

  When loading, it can upload image RAM I get error 32768 PEBASE ISO file would not load.

  I suspect the defective recovery disc? and a new a £29.99? But the laptop is under warranty but they told me to do.

  My daughter has an Asus 904HD and once she had a problem... She doesn't have poor support to go and do it yourself... Asus has sent a letter of selection very fast-confirmed by return text-fixed-delivered confirmed drop out of text within 5 days!

  > I suspect defective recovery disc? and a new a £29.99? But the laptop is under warranty but they told me to do.

  I doubt s a defective recovery disc.
  Error message: missing or corrupted: System32\Drivers\Ntfs.sys could be caused by hardware or other component defective HARD drive.
  In your case, I recommend contacting the Toshiba ASP for the verification of the material with the new installation of the OS. The laptop is under warranty (as you suggest in the display above) and so everything should be done for free because it s covered by the warranty

  Good bye

• LabVIEW, could not load library blockdataapi.* &amp; quot; BlockgetIOReferenceByModule:C on

  Hello

  After copy of project and re-Assembly, I fell into a large number of problems. LabVIEW is suspended, MAX crio error, no communication to my cRIO-9074, etc.

  I formatted the drive and re-installed the software Labview and now at least MAX has no errors, IP adr. Ok.

  Deploy my application VI gives (as before); LabVIEW could not load library blockdataapi.* 'BlockgetIOReferenceByModule:C on the device target RT.

  VI does not run.

  How can I fix this problem?

  Greetings, Frank

  Hi Frank,.

  It looks that your VI using the NI Scan Engine Advanced IO access API (http://zone.ni.com/devzone/cda/tut/p/id/8071)

  This component is not installed by default, you must add it as you have formatted your cRIO.

  The excerpt below if the link above with installation instructions document:

  «Support for the API to access IO advance must be installed on the objective of the measurement and Automation Explorer (MAX).» Expand the target under remote, devices right click on softwareand select Add/Remove programs. Select custom software installation and install the component called NI Scan Engine Advanced IO access 1.0. »

  I hope this helps!

  Kurt

• Could not load the connector pane

  Has anyone else had this error before?  I asked tech support, but they had not seen anything like that either.

  System:

  Windows 7 Professional (64-bit), LV2010 (10.0f4 v, 32 bit)

  The repro steps:

  (1) create a new VI (any method)

  (2) right-click on the icon and select 'display the connector '.

  Expected result:

  Connector pane appears

  Actual results:

  Error message - "LabVIEW: cannot load the component connector.

  

  Workaround solution:

  Click OK in the error message.  The connector pane then charge and everything works fine.

  This happens only the first time that I open the component connector on a VI; It does not happen after that I have opened (even after the backup, etc.).  Technical support had me try the f4 patch, reinstall/repair of LV2010, and I even made a compilation of mass for good measure.  It is not a real problem (I just click OK on the error and go about my business), but I'm curious to see if anyone has seen this kind of behaviour before.

  -Daniel

  So if you have an archaic line in your file LabView.ini (maybe since way back in the days 6/7/8.x and it is simply copied to after each upgrade, then copied on new computers) and it looks like this:

  defaultConPane = 4185

  

  Then you could try to load a connector component that does not exist.  It should perhaps have been 4815, or something else.  In any case, delete said line and everything is fine.

  http://digital.NI.com/public.nsf/allkb/279F064F0688C114862570900057678C