Possibility of fade the FLV Playback component?

Similar Questions

• Start the flv playback component playing mailed paused after n seconds

  I have a component playback flv (vidPlayer) with a set number of landmarks.

  When a cue point is reached the flv playback component stops

  and an externel swf is loaded from the staging. I know that the swf file plays for

  124 seconds. What I would like is for the flv playback component to start

  playing again hence is was suspended at the end of these seconds 124

  [code]

  If (event.info.name == "lit_23") {}

  lit_22.visible = false;

  var Xpos:Number = 94;

  var Ypos:Number = 78;

  var swf:MovieClip;

  var loader: Loader = new Loader();

  Loader.x = Xpos;

  Loader.y = Ypos;

  var defaultSWF:URLRequest = new URLRequest ("colours.swf");

  Loader.Load (defaultSWF);

  addChild (loader);

  component playback FLV stops

  vidPlayer.pause ();

  now start playback position break after 124 seconds

  }

  [/ code]

  Import fl.video.MetadataEvent;

  vidPlayer.addEventListener (MetadataEvent.CUE_POINT, fl_CuePointHandler_3);

  function fl_CuePointHandler_3(event:MetadataEvent):void
  {

  If (event.info.name == "lit_1") {}
  lit_1.Visible = true;
  }
  If (event.info.name == "lit_21") {}
  lit_20.visible = false;
  lit_21.Visible = true;
  }

  If (event.info.name == "lit_23") {}

  var loader: Loader = new Loader();

  Loader.Load (new URLRequest ("smallvideo.swf"));
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, swfLoaded);

  Loader.x = 91;

  Loader.y = 82

  }

  If (event.info.name == "lit_22") {}
  Loader.Visible = false;
  lit_22.Visible = true;
  }

  }

  function swfLoaded(event:Event):void {}

  var loader: Loader = event.target.loader;

  trace ("Loaded")

  MovieClip (loader.content). your_flv_pb_instance_in_smallvideo. addEventListener (Event.COMPLETE, smallVideoFLVCompleteF);
  lit_21.visible = false;
  lit_1.visible = false;
  addChild (loader);
  Loader.x = Xpos;
  Loader.y = Ypos;

  vidPlayer.pause ();
  }

  function smallVideoFLVCompleteF(e:Event):void {}

  vidPlayer.play ();

  }

• FLV playback component problem

  Hello world.

  I have problems with the FLV Playback component in Flash Professional CS5. In particular, I have works perfectly under Flash, I published it and yet when I go to insert the SWF file on my Web page using Dreamweaver CS4 the play with all the controls bar disappears. I am a completely free taught novice so I've probably missed something very obvious, but any help would be greatly appreciated because it is now driving me crazy!

  Thanks in advance

  Let yourself be guided by the server.  It is a random test in DW.

• Stop the flv playback when you exit the current image

  I searched countless forums (here and other sites) and have yet to find the solution I'm looking for (if all goes well, if it exists).

  I have an flv file is loaded by the flv playback component.  Everything works except that the video (and audio) continue to play even after you leave the frame on which is the instance of the component.

  I found a solution that stops the audio using: SoundMixer.stopAll ();

  But the video is still streaming and affect the performance of the site.

  I want to stop the audio and video, which means using the: playbackInstance.stop ();

  However, all of the solutions I've met basically say to add the stop function to all buttons that potentially could borrow the framework with the instance of reading.

  This seems completely tedious and bulky, especially because I have visible navigation buttons from my 'main' swf and MULTIPLE instances of reading I have are found within a swf loaded with its own navigation as well.  By the nature of the design, instances of reading will not always be on the scene calling references will probably trigger errors.  Of course, there are ways to do this with conditional statements, etc.  But it just seems like a waste of time.

  Is there a simple way to call playbackInstance.stop () to navigate away from the current image?  An event to listen to?  I forget one obvious answer?

  I really want to think that there is a more elegant solution than adding so much in bulk to each eventHandler for button on my site.

  Add an event listener for the removedfromstage event.

• Flash FLV Playback component - problem with swf

  Hope someone can point me in the right direction here - try just the FLV Playback component to replace a couple of short videos on a Web site with a version of flash.
  
  I've got the SWF works OK - when I saw in HTML it everything works fine.
  
  However, on the page I have downloaded on my site, it is not and looks like:
  
  link here
  
  Any ideas why not?
  
  I checked, and html, flv and swf files are all downloaded, as is the AC_RunActiveContent.js file.
  
  See you soon.

  Spotted it - didn't know there was a separate .swf for controls.

• FLV Playback component

  Fast forward and rewind on the FLV Playback components buttons do not work as normal. If you have tried to use them, you will notice that they meet a click rather than an event mouse_down event.
  
  By taking a part of the skins, I found that the fast forward clip is forward_mc.
  
  How to create an event listener to the buttons inside the FLV Playback component?
  
  If the instance of my FLV Playback component is called 'film', how it access?
  
  I tried this, but it does not work:
  
  This.Movie.forward_mc.addEventListener (MouseEvent.MOUSE_DOWN, fastForwardDown);
  
  function fastForwardDown(e:Event):void {}
  FastForward film
  }
  
  Thank you

  OK... Thank you. Here's what seems to work.

  If (e.target.name == 'forward_mc') {}
  do what you must
  }

• Qosmio G30-163: is it possible to get the HDMI by component

  Hello

  It seems that I'll be stuck with my Qosmio back to its own screen whenever I turn off my LCD TV. So what to do?
  I have a box of multiple component entry from another manufacturer. Is it possible to get the HDMI / component?

  While I listen to my signal through that?
  The only other option is for me to leave my TV in all of time...

  Hello

  Hmm, to my knowledge the HDMI / component is not possible.
  The HDMI-DVI adapter is known to me. Also the "cable DVI-component.

  In any case, I don't think that it is a large and serious issue. You can use the FN + F5 combination to toggle the display if the image switches to the internal display of the laptop!

  Best regards

  Goodbye ;)

• How do you define the size of a FLV Playback component?

  Here is my code that plays the video:

  Fl.video import. *;
  
  var myVideo:FLVPlayback = new FLVPlayback();
  myVideo.source = "video.flv";
  }
  
  addChild (myVideo);

  How to set the size of the video? I tried "myVideo.videoWidth = 400;" but it gives me an error.

  Thank you!

  If you are the name of the flvplayback component is myVideo, use:

  myVideo.setSize (444,400);  444 corresponding to the width and 400 is the height.

• Not loaded FLV playback component skin

  I have a list of FLV files and want to see the ot an instance for each of them in a scrollpane.
  
  I put an instance of pane to scroll on the stage. Assign a content to a clip path in the library. In this clip, I placed as a result of lines of code
  
  //========================================================================
  courses of water = new Array ("d:/work/flv/audio1.flv", "..") / flv/audio2.flv ','... / flv/audio3.flv ','... / flv/audio4.flv ','... / flv/audio5.flv ','... / flv/audio6.flv ','... / flv/audio7.flv ','... ("/ flv/audio8.flv");
  thisObj = this;
  streamCount = streams.length;
  for (var i = 0; i < streamCount; i ++) {}
  thisObj.attachMovie ("FLVPlayback", "p" + i, i);
  eval("thisObj.p"+i)._height = 50;
  eval("thisObj.p"+i)._width = 420;
  eval("thisObj.p"+i)._x = 0;
  eval("thisObj.p"+i)._y = 50 * i;
  stream = eval("thisObj.p"+i).contentPath;
  }
  //===================================================================
  
  now I see all eight instance of the flvplayback component. But I can't see the loaded skin. It's so not to play, pause, volume and seekbar button. the "ClearOverPlaySeekMute.swf" is also in the same folder.
  
  Help, please.
  

  If eval("thisObj.p"+i) does not work... then you must add

  eval ("thisObj.p" + i). Skin = "ClearOverPlaySeekMute.swf";

  alongside others after your attachMovie

  I think that the component's x and y properties _x and FLF and method setSize (w, h) - which may give better results if you hit problems with sizing and positioning of the way you do now.

• I can zoom the flv video, playing in my swf?

  I can zoom the flv video, playing in my swf?

  Hello

  I have a FLV video that is related to my SWF file (he plays inside a flvplayback component in my movie). I would like the flv to zoom (because it plays) when the user will fly over to it. Is this possible? I was able to "Create a motion tween" on it so that it plays in edit mode , but when I preview the it, the flv just stay the same size.

  
  I did this zoom with symbols/shapes (using the preset of 2d-zoom movement), but I wonder how I could do this on a flv. I need the video to play as the transformation changes so I can't zoom in an image that looks like the video and then swap for the actual video when it comes to actual size.

  
  Thanks for any help.

  Thanks Kglad.

  I found a good explanation step by step to this process of Somascope (you need to create a movie clip on the flv playback to interpolate actually component):

  http://forums.Adobe.com/message/3481842#3481842

  also, here are a few documents:

  itions/Tween.html http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/FL/TRANS

• getURL - to end playback of the FLV

  Hello
  
  We know how getURL at the end of flv playback. I feel that I've looked everywhere.
  
  Uggghhh.
  
  Thank you
  
  Robner357

  You are a genius!

  I read the forum messages, flash, knowledge base articles, etc... and I could not find an answer that I could use (or perhaps understand). I'm shocked its so simple. I guess I would just add the following to this answer details in case other people are working in the same way.

  1 import the movie to the stage
  2. treat the import via the dialog boxes that appear
  3. once the flv component is on the stage, select it.
  4. in the settings dialog box, enter an instance name
  * This example uses "cpVideo."
  5. place the code as a script in frame (not on the component) below
  6. replace the URL with the one you want.
  7 download - enjoy!

  var cpVideoListener:Object = new Object();
  cpVideoListener.complete = function() {}
  getURL (" http://yourURL.com");
  };
  cpVideo.addEventListener ("complete", cpVideoListener);

• Is it possible to hide the pane "tabs" in playback mode in the most recent Acrobat Reader ms?

  I have been using the playback mode all my life. It is very convenient when you have a small screen for laptop and want to read long PDF documents... However, the most recent Acrobat Reader DC keeps this pane "tabs" even after the playback mode. So, is it possible to disable the "tabs pane" when I switch to playback mode? Here's a screenshot, so you will know what I mean...

  

  In preferences, you can turn off the display of the tabs.

• Is it possible to activate the option 'make flv' for limited administrators?

  As the title says: is there a way to allow an administrator limited to use the option "make FLV? I enabled "Allow Limited administrator access meetings and content of records", but I want to activate the possibility for a limited administrator make a FLV in a record copy in a folder of content, without activating any other administrator privileges.

  Thanks in advance for any advice.

  If you give someone rights to host to the room containing the record or manage the rights of a record in the library of content, then they should be able to make a recording FLV version. You can assign the small Admin group the appropriate permissions for meetings/files and they should be able to make the FLV files offline.

• FLV Playback CUE Points Sub Panel in the missing properties panel?

  So, anyone knows how we can add cue points to FLV using Flash CC reading. Thus, using Flash CS6 if you import a video of your internship (file-> Import-> import video) component FLVPlayback is added to your step. If you cilck component FLVPlayback the POINTS of REFERENCE under Panel's niche in the Panel properties like this:

  

  However, if you click on the FLVPlayback instance in Flash CC, you get nothing. HOWEVER, please note that it shows that the FLV file contains cuepoints (it was an existing CS6 file I added the cuepoints already). But since the Panel of sup of POINTS of REFERENCE does not exist, I can't edit them.

  

  Thanks for your help!

  Landmarks Panel is deprecated since Flash CC, but you can make use of Action-script Cue points to your video into CC to animate.

  See the benchmarks AS section in this document: Adobe Flash Professional CS5 * landmarks of use

  Adobe ActionScript 3.0 * use cue points

• on the end of flv playback to go to...

  Hello

  I am in the final stages of the construction of my new web site:

  http://gggraphic.com

  On most of the pages in the portfolio, there is a video 'Comment' link (top-right)

  Each of the comments are called by flv

  for example:

  myMCL.loadClip ("http://www.gggraphic.com/new2/new2_flash/new2_brand3.swf", 45 ');

  Once the video is done playing, it fades to black.

  I really want the flv to trigger an event to send the playhead to another frame and load another swf.

  I could use a pause command and let the hour main line break so many milliseconds, then proceed, but it is not how long it takes each viewer to download the video and watch it.

  A handler at the end of the flv would be better.

  Can someone tell me the easiest way to do this?

  I use AS2

  Thank you in advance.

  ggaarde

  You are welcome.

  p.s. If your are still able, please mark this thread as answered.