Not me works 3D, alguienme can help?
Hola
Queria ayuda por favor, results as 3D me esta dando error, is cierra al access y me dice than already por lo programa funcionar, El Quebec Hay close tanto no antes no he actualizado los drivers of tapeworm any problema, pero veo than no pasa nada, creo that without is actualizan aunque me as ha sido correcto, pero sigue sin funcionar 3D.
Gracias
Is your video card has 512 MB of dedicated VRAM?
Make sure that your computer meets the minimum requirements for Photoshop system requirements Photoshop.See
Also update your graphics card drivers. Refer to update the graphics driver. 8, 7, Windows Vista
~ Assani
Tags: Photoshop
Similar Questions
-
IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the wireless connection and the message that the DNS server is not responding.
The problem may occur if the computer is unable to connect to the DNS server.
To check, I suggest you follow the steps:
Method 1: Re-register the DNS
a. Click Start. Type cmd in the search box and press ENTER.
b. at the command prompt, type the following command and press ENTER:
ipconfig/flushdns (there is a space between ipconfig and /)It will display the message properly emptied the cache of DNS resolution.
c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)d. at the command prompt, type the following command and press ENTER:
ipconfig/all (there is a space between ipconfig and /)
The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
If this is the case, try this:i. enough at the command prompt ipconfig and press ENTER
II. ipconfig / renew in command prompt and press ENTER
The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)
Method 2:
a. click Start and then click Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. choose the DNS server to obtain an address automatically , then press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
under windows xp... IE guard suspended and freezing... have you tried several fixes nothing seems to work... am really frustrated with this... dns cache flush... someone can help please
Download, install, update and do a full scan with these free malware detection programs at:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner
http://www.eset.com/us/online-scanner/ eset online scanner
post back with the results and more info:
brand and model of browser, OS, pc and ServicePack, current antivirus?
What was the first question?
Have what steps you taken?
What are your error messages?
-
My CS3 spry horizontal menu does not work in Everybody, my swap image behavior does not dry. Can anyone help? Thank you.
To the place where I put before (and burst out of the container foot...), put it below:
Beth
-
As indicated above. Seems no power go to CD rom. light does not illuminate. door does not open, do not play the cd
with a disc inside your CD rom, if you right-click on a CD rom and select eject, it will work?
If this isn't the case, I suspect a hardware problem and you need to change your CD rom drive.
-
Photoshop touch PaintFX paint tool doesn't work don't not on iPad at all can help you
Brush painting effect tool does not not on iPad.
I cannot use this tool to take shelter in pencil t... I used to be able to do it, but now it just seems to cover the whole image in fact pencil because I only want to be part of the picture of the effects of pencil... I use an iPad with the latest version of iOS and Photoshop.touch...
I have the latest iOS and the last photoshop...
Adobe can you please correct that everyone can check and see if it is affected in the iPad...
An idea that I'm something wrong... Can someone tell me...
Ok
How many layers you have btw?
Have you checked the settings of the brush, opacity, size, for example?
Exactly which version of iOS that you use?
Have you tried to quit all other running applications, and then restart the device or the app?
It may be that his reason is low on resources if it is not a thing of the brush.
Thank you
Ignacio
-
The message has an attachment that comes from an old version of my computer and the flyer in the attachment was conducted in the PUB file. The box arrived that I don't have the file to open it and go to the tool, the information bar and click on unlock and it does not work either. He also says to define the association Panel and I don't know how do either.
Please can someone help me get this open.
SASSIE
http://Office.Microsoft.com/en-us/Publisher-help/where-is-the-Publisher-Viewer-HA010233906.aspx
-
Plug-in "whitewindowworkaround.plugin" no longer works. Who can help?
See this thread:
The error in PES 11 occurs once more, with or without the plug-in. version Apple Yosemite is 10.10.2.
When attempting to clone, the clone can be chosen, but the clone function does not work.
Something has changed (maybe an Apple update?), but I do not know what...
Help?
The best thing to try is to remove the plugin WhiteWindowWorkaround, then reset the PES 11 editor preferences and see if it works.
If so, then it is useless to put the plugin WhiteWindowWorkaround.
Go in Adobe Photoshop elements editor > Preferences > General, click reset preferences on the next launch , and then restart the PES 11 Editor.
-
Can't get the laptop to run as normal as it is all displayed on the side!
[Moved from comments]
Press Ctrl & Alt keys and use the arrows to rotate back.
According to the graphics card on your computer, these can be alternatives.
Right click on the desktop | Graphics options | Rotation.
Right click on the desktop | Screen resolution | Orientation.
-
The State is broken and has tried every day since 10/15. Error code is 646.
Hi thomas talbot,.
Welcome to the Microsoft Windows answers Forum community!
Please refer to: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/4a971145-86ca-4b80-a545-93a36536d690
I hope that helps!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Fs9 not opening - identified problem but need help repair
I want to thank you in advance for your time. I am trying to install and play flight sim 2004 on windows 7 - a x 64 sys - and when I open fs9.exe splash screen or anything really fails to display.
I think that is the problem, is that there is no record of FS9, under the %appdata%\Windows\ that basically, I need help trying to solve. Is there anything I can download to replace this file? Or am I just looking in the wrong place.
Also, I installed it in a different directory, not the directory Program Files (x 86) but rather just C:\FlightSim\
Hi Jordan,.
The game does not appear to be installed according to the description of your problem.
I suggest you log in as administrator or right click on fs9.exe file and run as administrator.
I think that this is precisely the reason why the FS9 folder does not appear in c:\users\
explore \appdata\local\Microsoft\windows\game. If this does not work, I suggest that you look into other aspects as well. Follow the steps below.
Method 1:
Update display drivers . The flash on the screen could also be because the display drivers are not updated. I would recommend you visit the manufacturer, download and install the latest display drivers for windows 7.
Method 2:
I suggest to disable UAC and then try to install the game.
Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
Method 3:
Temporarily disable all security software and try to install.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.If the problem persists, then I suggest that you post the question in the Microsoft Flight Simulator Games Forum for further assistance.
http://www.fsinsider.com/
FOR INFO:
Flight Simulator 2004: Known video issues
http://support.Microsoft.com/kb/823628Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] -
"I get the message:" Mail needs repair information on your mailbox store. Exit and open the mail again. »
None of this does not work. Please can you help me?
Mail is version 8.2 (2104)
iMac 27 inch mid 2011
Processor: 2.7 GHz processor intel core i5 memory: 4 GB 1333 MHz DDR3 graphics: AMD Radeon HD 6770 M 512 MB
Troubleshooting post - Yosemite
Address postal (Yosemite): If you are unable to receive messages
Address postal (Yosemite): If you are unable to send messages
-
my hotmail has been hacked 4 days ago and sent viagra emails. I went in Thursday night to reset the password and then the account has been blocked. Since then, he invites me it will allow me to reset my password by SMS me a code but they NEVER TEXT me the password. then I try to get help via emial online but you must be signed in and of course I can't get because my account is blocked. all my emails work are here and I've had this account since 1998 and I don't remember my secret question. I've been on the phone for an hour with 3 people after trying to bypass automated telephone lines and SOMEONE can help you. I have now got a Hotmail Plus account that I paid for, in the hope that someone might transfer my emails from old account again and PERSON can help you PLEAES PLEAES HELP! why I have not listened to my friends telling me to go to gmail, I'll never know... after 13 years, I thought I was ok... Argh
Hi CynH_Fort,
Since you are facing problems with your hotmail account, you can publish your application in the Windows Live forum to get help:
-
My activation key for windows 7 (bought from my college) does not work. How can I contact someone who can help?
-MikeHello djplexus
First, you will need to understand how to set up the dual boot. This will allow you to be able to choose between XP and 7 at startup.With regard to the creation of an image of Windows XP Backup there is no Windows XP software that will do it for you. You will need to look to third-party vendors for support with this issue. Thank you. -
Windows Vista Edition Home Premium. I can't looking for photos, Control Panel, computer etc... He said: "class not registered" when I click on any folder. I googled the error and solutions must go to cmd.exe and type regsvr32 ExplorerFrame.dll. Do that and it doesn't work. I get a response that says: "ExplorerFrame.dll" module is not compatible with the version of Windows that you are running. Check if the module is compatible with a x 86 (32 bit) or x 64 (64-bit) version of regsvr32.exe. »
I also tried sfc/scannow and that crosses and said errors were found and he was not able to fix all the. It's that I got. I hope that someone who has had this problem can help me find a solution.
Kevin
Hi Kevin, welcome Microsoft answers forum! You did changes to the computer? Have you installed the latest windows updates? Step 1: Check if windows is enabled, if not, go ahead and activate windows how to activate Windows Vista http://support.microsoft.com/kb/940315 step 2: install the latest windows updates.
Step 3: Check with a different user profile
If you do not have a different user account, you will need to create a. If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Step 4: Online a scanner for any threat and try to correct
http://OneCare.live.com/site/en-us/Center/cleanup.htm
You can check the link that addresses a similar issue and try to install the hotfix mentioned in KB 935855 http://social.technet.microsoft.com/Forums/en-US/itprovistadesktopui/thread/1480f05f-f2a5-4e43-9c78-39ddf9193d93
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
It is true that FireFox is no longer support Win2K?
I received a message, allegedly from Firefox, Win2K is no longer supported. Is this true? If it is true, I can't continue to use FireFox under Win2K? What are the possible vulnerabilities? I have access to the internet via a wireless router that has
-
Compaq CQ2009F desktop PC: battery CMOS
I need to replace the CMOS in this old computer battery and need to know the right pair to buy. Generic instructions from HP Web and video shows that the battery is a 2032, but I would like to be sure. Can someone tell me exactly what battery I nee
-
Portege M400 sees no more than 3 ~.
I know it is a common problem, but apparently not solveable on my Toshiba M400. I have upgraded to 4 GB of RAM (2x2gb) and I am running a 64 bit OS, but the OS cannot see that the 4 GB installed ~3.3GB. The BIOS shows 4G. I understand that some machi
-
Original title: software update for my i touch I am trying to download the 5.01 update software for my Apple i-touch. However, the download is so long that I get an error message indicating that my network connection has expired and the downlopad do
-
Blue screen and auto resumes on the coming of hibernation - XP service pack 2
I use XP Service Pack 2. The system enters into automatic hibernation, and when I have one - hibernation ", either by reopening the laptop or presing the power button, the operating system begins to awaken and then I get a blue screen error and he st