not possible to bind a variable shared via Ethernet network

Similar Questions

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• Install the software not found on my OfficeJet Pro 8000 wired Ethernet network

  I'm trying to reinstall an OfficeJet Pro 8000 on my wired ethernet network using the 'minimum' driver install.  My PC is Windows 7 Pro (32 bit).  I have the printer configured with a static IP address, I can successfully ping and accessing the Web page printers via the IP address.  I have uninstalled the HP 8000 software using the two installation software "uninstall" and you run the HP removal utility and have restarted the PC.  I disabled my firewall ZoneAlarm and AV/AS software for installation.

  During the resettlement process, when the software is looking for network printer, it cannont find the printer on the network, despite the fact that I can ping the printer directly and access its Web page via IE.  Using the advanced search and entering the IP address of the printer does nothing.  I'm at the end of my ideas on what to try (I said this whole process about 3 times now with the same results!).  What Miss me?

  Thank you

  Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

  What did he say?

• Renamed 3 variables shared on the network in Subvi to starting RT VI, now they won't write?

  Hello world

  I worked on an RT program deployed to our cRIO-9024 with custom FPGA, and I changed the way in which the data is written to these three types of DBL 1 d. I renamed the shared variables ("shvars") in the library of the RT project shvar and also changed the target to the PC for the debugging of the function of the code written for them. I used a struct of conditional compilation to turn them off and something has been corrupted along the way and the second node broken shvar (node moved directly from project, no programming style) and caused a hard compilation failure in the Subvi. I got the compile error and go after the removal of the node of shvar entirely and placing him again the project and everything seemed fine.

  Soon, I bring the Subvi RT application instance and build my RT exe and deploy it. On the host PC, this second shvar now not get written in at all. I hunt and chase and decide that something is wrong with the deployment of the shvars. I redeploy all and even delete all 3 of the nodes of these shvars in the Subvi and place them again. Now, all 3 are not be written to. My next step is to move the shvars out of this sub - VI I put them in but this is recommended? Note that sometimes they seem to get written once and then are forever silent after that. Is this because I use the nodes instead of the function of programming with shvar addresses?

  Thank you.

  Edit: Notice the same level superior RT vi successfully wrote in 19 other shvars that I have not touched.

  -Very well, I shot myself in the foot and was in fact barking the wrong tree. Put shvar nodes in a Subvi was well and not at all related to the problem.

  The problem is that I had a bug in my code FPGA in a particular case, that could get him to stop putting valid data. Once I corrected this bug, everything returned to normal. I would like to delete this thread, but a little shy is right for you.

• Connection to a wireless - printing Via Ethernet network?

  Hi, I had a search here but you can't find what I'm looking for, sorry if it was taken!

  I just bought a HP C310a wireless all in one, very happy so far.

  I connected my Netgear DGN2200 wireless, job done. I printed the test page and all is well.

  I'm now trying to set up my PC to print through my router via an Ethernet connection, but I've hit a brick wall!

  I tried to connect via usb and then try to go wireless, but it will not find the printer. I have also run the program quotes but it does not find the printer?

  Any ideas please?

  Thank you.

  OK, another problem as well!

  I just tried to connect with my wireless laptop and it failed. Looks like maybe that's a problem with my Netgear router?

  This rule!

  Just in case anyone else has this problem, it was down to my speed on my router settings. Speed has been set to "up to 300' and I reduced it" up to 145', and it worked very well, both wireless and ethernet. "

• Is it possible to stream DVD of ICloud instead of iTunes home sharing via my computer?

  I would like to be able to download my DVD somehow so I can play them all Apple TV (gen 4) instead of airplaying them or having to maintain the computer to share the home of my iTunes (latest version). As it is, if I want to watch a DVD, downloaded on my Apple TV I must select COMPUTERS and go into my library to select the movie and then keep my computer over time. I managed to download a DVD on my Icloud player hoping to be able to stream the DVD from there nothing doesn't. I do not understand why this is the case and am unable to find any resources that explain the case however, I'm rather new to all this and perhaps, I not looking in the right places. Second of all, why can't I just go to the MOVIES on Apple TV and find them there with the rest of my movies as opposed to strictly buy films he and others else where; they are all good movies? Put them in the category FILM (it is more a problem of Apple, I guess). Is it possible to stream my DVDs to iCloud instead of iTunes home sharing via my computer? Any information or guidance would be appreciated thank you for taking the time to answer my questions.

  When you look at the top row of the applications the homescreen are apps from iTunes Store.

  So the only films - purchased are one you purchesed from iTunes. It is the same for other applications in the same row.

  Focus on Plex to broadcast your own films as an alternative to the use of computers on the Apple TV.

• I want to express my Adobe Muse subscription. Via the site is unfortunately not possible to ensure that through my accounbeheer online. I started by mentioned support customer.

  I want to express my Adobe Muse subscription.

  Via the site is unfortunately not possible to ensure that through my accounbeheer online. I started by mentioned support customer.

  Is it possible to fix cela via chat or by phone to get?

  
  

  You can reach support by chat or phone team:

  https://helpx.Adobe.com/contact.html?step=Muse

  Thank you

  Sanjit

• How can I create an event listener for the change of variable shared or similar?

  Hello

  I have a 'big' 6 devices communicating measurement system via the TCP protocol. The system is designed to use REST (the representative State transfer) with JSON (JavaScript object notation).

  Now, I need to add labview program to this environment. I've implemented a solution to 'work' with the help of this forum. Thank you for this! Now, I need to do better (currently no timestamps, large delays, etc.).

  I currently have a web service deployed using http-get as input. My web service .vi is just passing the web entrance to shared variables that are then questioned in real measurement program. Reason is that when I put the measurement program directly to the web service, it does not (something about rights and dependencies). Measurement program includes one third of the owners (Instron) drivers. Also I would not direct access via the network to our mechanical testing device potentially dangerous.

  Now, I want to change the message from the web services .vi commensurate .vi. Currently I have a loop of 10ms to query for changes in the shared variable. Is there a better way to do this? I thought create a listener to the shared variable change events.

  In addition, if you have any ideas (preferably, working code example) how to make the interface between labview and TCP-JSON I would really appreciate it.

  BR,

  Juha

  Currently in LabVIEW, the only way to create an event listener or event NSV is to use the DSC toolkit.  Most of the time the DSC is a very expensive tool that simply encapsulates the functionality that is built into the motor of the PSP and OAS and which is accessible to anyone who can program in LabWindows/CVI.

  http://zone.NI.com/reference/en-XX/help/370051P-01/CVI/libref/cvicnvcreatesubscriber/

  If you want to collaborate, I would like to create a small library of LV that would create a base SV events using a vi LV reminder or possibly passing return user LV event which is how works the DSC toolkit.  I asked OR several times to explain how do this and they're very tight discreet about it.  I guess that they do not want to give users LV less reason to buy the DSC.

• Deployment of local variables shared on a real-time target

  Hello everyone, once again

  I read more posts and knowledge base articles about this topic than I can count at this point, and I'm scared, I'm still not clear on exactly how it works, and I hope that someone can delete it for me, if it is to earn themselves some laurels more.

  I have a project with a real-time quote and the other Windows.  They shared communication via network-published variables.  The real-time part also uses shared single process variables to communicate between the loops.  I have the intention of all 3 libraries of shared variables (Windows-> RT, RT-> Windows and RT Local) to be hosted on RT target for reliability.  Real-time executable must start at startup and run even if side Windows is not started (on the side of Windows is optional).

  I realized that real-time executable will not start the variable engine shared and/or deploy itself shared variables.  I also read that I can't deploy the shared variables programmatically from the side of RT.  This leaves only two options that I know of:

  (1) their deployment programmatically in Windows-side program.

  (2) deploying the shared variables on the target RT manually via the project in the LabVIEW development environment, and

  About option 1, as I said running Windows is supposed to be optional, so you have to run a program on the Windows side before the side RT will work is highly undesirable.  Moreover, even if I do a little "Deploy shared variable" application that runs at Windows startup, I can't guarantee that it will work before start of the side RT executable will run.  In this case, the executable file RT will fail due to not having the variable engine shared running?  If so, and side Windows, and then starts the engine / deploys the shared variables, the side RT begins to work automatically?  If not, is it possible to trigger this restart of the Windows startup application side?

  Also, I just read everything and tried the option to build to deploy variables shared in the application of the side Windows.  Not only that my RT shared Local Library variables not listed as an option (given that the application of the side Windows does refer to it in all for obvious reasons), but when it deployed two other libraries at startup, the program side of RT (which was running in the development environment) stopped.  I'm not positive that would happen even if he was running like a real executable file, but it is certainly enough to make me nervous.  I assumed that the library is not listed may be resolved by including a variable network-a published in the local library of RT and including the app side Windows.

  About option 2, I don't understand how I'm supposed to deploy my libraries shared variables without stopping the execution of the startup on the target real-time application.  Once I did, the only way to restart the application of the RT is to restart the computer RT, correct?  In this case, I just undid all the interest to deploy the shared variable libraries?  Unless libraries remain deployed and variable motor shared running even after restarting the computer of RT, which would solve the problem I guess.  Certainly, I would like to know if this is the case.

  However, option 2 is complicated by the fact that when I manually right-click on any of my shared variables libraries and select "Deploy" or 'Deploy all', libraries still do not appear in the Manager of the distributed systems, even after clicking Refresh several times, on the local system or the target system.  The only thing that shows up, on both sides, is the Group of 'System', with FieldPoint, etc. in it.  The same is true when I run my application in real-time in the development environment, even if the shared variables are clearly working, as I mentioned earlier.

  So, if you have done so far through this mammoth post, thanks!  I have three main questions:

  (1) are that all my descriptions above correct in what concerns the variables how work sharing?

  (2) what is the best way to meet the requirements I have described above for my project?

  (3) why shared variables libraries not appearing in my manager of distributed systems?

  Thanks for any help you can give on any of these three questions!

  -Joe

  1. Yes, as soon as you deploy the project the NSV is tranactional.  EVS is loaded by MAX when you configure the RT target and begin to operate as part of the boot sequence.

  2. you can see anything on your target rt in the DSM?

  3. Yes, NSV and EVS are persistent resets.

• global variables shared between several targets of RT

  Hello

  I'm looking for some information about variables shared between RT communication network.

  Scenario: a PXI 'master' and several 'slave' PXIs running that screw RT. data is available in the form of a cluster of definied type on each slave PXIs (inside a non deterministic while loop). I guess I create global variables of network shared for each PXI slaves. A variable for each slave. I only write data in these variables in one place (above mentioned, while loops), on the PXIs slave. I need to read that data in a way with loss (I just need that value the most recent, as tags) from the master PXI.

  Question: can I simply use "network shared variable" settings by default? I mean, I do not enable the option RT FIFO (single element), because I think that for a cluster that is a no go in the case of RT (variable length)?

  What do you think? Or would you have better idea how to share data between slaves and masters RT targets (I do not have deterministic/losless transmissions, only these last values)?

  I think that the way to proceed is to use the shared Variable Aliasing/binding - they allow you to 'link' shared variables in any of the multiple targets. https://forums.ni.com/t5/LabVIEW/Bind-Alias-shared-variable-to-scan-engine-variable/td-p/3290043.

  You can also use shared variables of programming access to access running on another target: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/usingdynvarapi/

  With regard to the other methods - you could always disseminate data via UDP multicast (or with a TCP/IP connection manager).

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• variable sharing, missing data, the timestamp even for two consecutively given

  Hello

  I have a problem with missing data when I read a published network shared variable.

  Host VI:

  In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)

  VI target:

  the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.

  Problem:

  rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.

  To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.

  Note:

  The shared Variable is hosted on the laptop and configured using buffering.

  The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.

  Simplified example:

  

  

  Question:

  Anyone has an idea why two consecutively data can have the same timestamp?

  Where timestamping (evil) Finally comes (System?)?

  What would be a possible solution (for the moment with shared Variables)?

  -> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.

  It would change anything when I animate the shared on the RT System Variable?

  Thanks for your help

  Concerning

  Reto

  

  This problem has been resolved in LabVIEW 2010.  You can see other bugs corrections in theReadme of LabVIEW 2010.

• to find instances of a variable shared a LabVIEW project

  I am trying to upgrade an existing (LabVIEW 8.6.1) program with many screws dynamically called and the author has used the shared Variables for exchanging data between the screws (I used probably globals functional, but I have to work with what's here). With shared Variables, it is not possible to right click > find all instances, and you can not use Ctrl-F

  Anyone know of a 'trick' or maybe a third tool (LAVA or perhaps JKI) which returns a list hence a shared Variable is read/written in a project or in the VIs in memory?

  HI Imd2,

  There is already a tool to get what you want. Please see this link.

  Mike

• Enter the data shared via BBM inside an application

  Hello

  I need to capture data shared via BBM inside my app BB10. I need to recover the data shared via BBM and then integrate it into my application.

  Is this possible. There is an onShareContent in the BBM-BB7.  We have this method in BB10 on the receiver side.

  This will then run on the receiver side. This must be set before the call to register()
  BlackBerry.BBM.Platform.Users.onsharecontent = function (sender As Object, content, description, timestamp) {}
  try {}

  } catch (e) {}
  TODO: handle exception
  Alert ("sharecontent.init Exception" + e);
  }
  }

  Kind regards

  Annuk

  BlackBerry 10 it is not possible to intercept data shared to BlackBerry Messenger.  But, your application can be a target from any application that supports sharing.  See the link below for more information.

  Receive call

• ASA 8.6 - l2l IPsec tunnel established - not possible to ping

  Hello world

  I have a problem of configuration of the CISCO ASA 5512-x (IOS 8.6).

  The IPsec tunnel is created between ASA and an another non-CISCO router (hereinafter "router"). I can send packets ping from router to ASA, but ASA is NOT able to meet these demands. Sending requests of ASA is also NOT possible.

  I'm trying to interconnect with the network 192.168.2.0/24 (CISCO, interface DMZ) premises and 192.168.3.0/24 (router).

  The CISCO ASA has a static public IP address. The router has a dynamic IP address, so I use the dynamic-map option...

  Here is the output of "show run":

  ---------------------------------------------------------------------------------------------------------------------------------------------

  ASA 1.0000 Version 2

  !

  ciscoasa hostname

  activate oBGOJTSctBcCGoTh encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  address IP X.X.X.X 255.255.255.0

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  the IP 192.168.0.1 255.255.255.0

  !

  interface GigabitEthernet0/2

  nameif DMZ

  security-level 50

  IP 192.168.2.1 255.255.255.0

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  management only

  !

  passive FTP mode

  internal subnet object-

  192.168.0.0 subnet 255.255.255.0

  object Web Server external network-ip

  host Y.Y.Y.Y

  Network Web server object

  Home 192.168.2.100

  network vpn-local object - 192.168.2.0

  Subnet 192.168.2.0 255.255.255.0

  network vpn-remote object - 192.168.3.0

  subnet 192.168.3.0 255.255.255.0

  outside_acl list extended access permit tcp any object Web server

  outside_acl list extended access permit tcp any object webserver eq www

  access-list l2l-extensive list allowed ip, vpn-local - 192.168.2.0 vpn-remote object - 192.168.3.0

  dmz_acl access list extended icmp permitted an echo

  pager lines 24

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 DMZ

  management of MTU 1500

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (DMZ, outside) static static vpn-local destination - 192.168.2.0 vpn-local - 192.168.2.0, 192.168.3.0 - remote control-vpn vpn-remote control - 192.168.3.0

  !

  internal subnet object-

  NAT dynamic interface (indoor, outdoor)

  Network Web server object

  NAT (DMZ, outside) Web-external-ip static tcp www www Server service

  Access-Group global dmz_acl

  Route outside 0.0.0.0 0.0.0.0 Z.Z.Z.Z 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  IKEv1 crypto ipsec transform-set ikev1-trans-set esp-3des esp-md5-hmac

  Crypto ipsec ikev2 proposal ipsec 3des-GNAT

  Esp 3des encryption protocol

  Esp integrity md5 Protocol

  Crypto dynamic-map dynMidgeMap 1 match l2l-address list

  Crypto dynamic-map dynMidgeMap 1 set pfs

  Crypto dynamic-map dynMidgeMap 1 set ikev1 ikev1-trans-set transform-set

  Crypto dynamic-map dynMidgeMap 1 set ikev2 ipsec-proposal 3des-GNAT

  Crypto dynamic-map dynMidgeMap 1 life span of seconds set association security 28800

  Crypto dynamic-map dynMidgeMap 1 the value reverse-road

  midgeMap 1 card crypto ipsec-isakmp dynamic dynMidgeMap

  midgeMap interface card crypto outside

  ISAKMP crypto identity hostname

  IKEv2 crypto policy 1

  3des encryption

  the md5 integrity

  Group 2

  FRP md5

  second life 86400

  Crypto ikev2 allow outside

  Crypto ikev1 allow outside

  IKEv1 crypto policy 1

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  enable dhcpd management

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal midgeTrialPol group policy

  attributes of the strategy of group midgeTrialPol

  L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2

  enable IPSec-udp

  tunnel-group midgeVpn type ipsec-l2l

  tunnel-group midgeVpn General-attributes

  Group Policy - by default-midgeTrialPol

  midgeVpn group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  remote control-IKEv2 pre-shared-key authentication *.

  pre-shared-key authentication local IKEv2 *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:fa02572f9ff8add7bbfe622a4801e606

  : end

  ------------------------------------------------------------------------------------------------------------------------------

  X.X.X.X - ASA public IP

  Y.Y.Y.Y - a web server

  Z.Z.Z.Z - default gateway

  -------------------------------------------------------------------------------------------------------------------------------

  ASA PING:

  ciscoasa # ping DMZ 192.168.3.1

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 192.168.3.1, time-out is 2 seconds:

  ?????

  Success rate is 0% (0/5)

  PING from router (debug on CISCO):

  NAT ciscoasa #: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 0 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 1 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 2 len = 40

  Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = len 3 = 40

  -------------------------------------------------------------------------------------------------------------------------------

  ciscoasa # show the road outside

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is Z.Z.Z.Z to network 0.0.0.0

  C Z.Z.Z.0 255.255.255.0 is directly connected to the outside of the

  S 192.168.3.0 255.255.255.0 [1/0] via Z.Z.Z.Z, outdoors

  S * 0.0.0.0 0.0.0.0 [1/0] via Z.Z.Z.Z, outdoors

  -------------------------------------------------------------------------------------------------------------------------------

  Do you have an idea that I am wrong? Probably some bad NAT/ACL I suppose, but I could always find something only for 8.4 iOS and not 8.6... Perhaps and no doubt I already missed the configuration with the unwanted controls, but I've tried various things...

  Please, if you have an idea, let me know! Thank you very much!

  Hello

  I've never used "global" option in ACL, but it looks to be the origin of the problem. Cisco doc.

  "The global access rules are defined as a special ACL that is processed for each interface on the device for incoming traffic in the interface. Thus, although the ACL is configured once on the device, it acts as an ACL defined for Management In secondary interface-specific. (Global rules are always in the direction of In, never Out Management). "

  You ACL: access-list extended dmz_acl to any any icmp echo

  For example, when you launch the ASA, there is an echo response from the router on the external interface--> global can block.

  Then to initiate router, the ASA Launches echo-reply being blocked again.

  Try to add permit-response to echo as well.

  In addition, you can use both "inspect icmp" in world politics than the ACL.

  If none does not work, you can run another t-shoot with control packet - trace on SAA.

  THX

  MS