Not recognizing any CD/DVD media

Similar Questions

• How to restart with the recovery CD, when the CD player is not recognizing any cd/dvd?

  How do I restart my Toshiba laptop [Vista Home Premium SP2]

  with my recovery CD / else, what CD drive isn't grateful no matter what CD / DVD.

  I tried to restore any of the other points, but no date is available before sept2010.

  Ferris

  Hello

  To get started with a Windows disc set 1 boot on CD/DVD order.

  / Settings (BIOS/CMOS) often F2 as you start then look at screen - 1 place the CD/DVD
  in the boot order (remember later). F12 on most Toshiba computers also allows you
  to set the order of boot for a start.

  Restore points are only usually return 2 weeks or less and backup or repair methods are needed
  After this period. Restore points only reset the system functions and backup any programs or
  data.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• T520 will not use any device DVD

  People,

  I was going to do a backup, when I noticed that the DVD player was no longer under my computer.

  I when in Device Manager, where he showed with a yellow X... I tried to update the device driver, it said that I had the right device. I've done many other things - nothing has worked.

  I really wanted to get the backup made, so I took my portable DVD player/burner and plugged. The laptop computer found a loaded device OK... but it does not appear in my computer. I had the same problem as the DVD drive internal.

  Then I got a USB drive external Passport, connected to the same USB port, no problems... He mounted the disk and I made the backup.

  My T520 will not use any device DVD... ideas?

  -Fred

  I did a quick search and voila. See the Windows 7 box.

  http://support.Microsoft.com/kb/314060

• multi dvd recorder Windows 7 Home premium for Acer x 3910-U4022 is not recognizing any cd or dvd inserted.

  in fact, nothing happens.

  a guru out there get help please inform

  Thank you very much

  gogibalbir

  Hello

  1. you get any error message?

  2 have you tried using different disks?

  3. were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Satellite A30-514: BIOS is not recognizing the CD/DVD or HARD drive

  Hi I'm having a little trouble with my Toshiba Satellite A30 friends. The hard drive died recently, and the cd tray was damaged.
  I found an exact replacement unit and we have a new hard drive, but the Bios is not recognizing the hard drive or Cd/DVD unit.

  I installed Windows Me via my own laptop and boot from the hard drive of the computer's hard disk, but it still does not recognize the DVD even if Windows does, and it is fully operational.

  This prevents me to install windows XP, the operating system it is. If anyone can help, I'd be much obliged, too, I flashed the bios with V1.80.

  Hello

  It is the first time I heard about this issue. The Bios doesn't recognize the drive but Windows is possible use it t.
  Why suggest that peut t BIOS recognizes the drive? Is it not possible to boot from the drive?
  Check if the IDE controller is enabled and the Boot section. The CD/DVD drive should be selected and activated.

• Does anyone have suggestions on what to do when the Windows 7 Installation DVD is not recognized by the DVD player.

  I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit.  I ran the Windows 7 Upgrade Advisor, which was positive.

  The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.
  I tried to restart the computer and also the start of the player directly in the BIOS.
  In the BIOS I have the following message:
  "No available boot device.
  Press the ENTER key to try again
  SATA-0: installed
  SATA-1: installed
  SATA-4: no
  SATA-5: no

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.

• Still is not recognizing an external DVD drive

  I have a macbook pro with a disk drive that broke after a year I had to buy an external. This is the first time I tried to burn a DVD using this external hard drive and when I press the button generate program tries to use the internal drive rather than the external despite two of them, turning on and make encouraging noises. The message appears saying: Please insert the DVD media, close the tray and click ok. Despite the fact that there is a DVD in the external drive but not internally, he insists on trying to use inside. Is there a way to change the settings so that it will on the external drive instead?

  In the build Panel, with DVD drive selected as 'exit,' under 'destination', you should see "recorder" and a triangle for a drop down to select which drive.

• BlackBerry Smartphones not save any type of media

  Hey yall,

  I'm having a problem with the storm save any type of media.  When I take pictures the screen just makes the sound of the camera, flashes and their right to return to camera mode without saving anything.  I tried to register at the media card and internal storage. No help.  Also, today I tried to make a recording of the voice.  He records and plays even recording, but as soon as I get out of the app, it disappears. I even renamed default name and it closed and opened upward and there is no record.

  BTW, I'm running OS le.90.

  Thanks in advance

  Cooper wrote:

  Hey yall,

  I'm having a problem with the storm save any type of media.  When I take pictures the screen just makes the sound of the camera, flashes and their right to return to camera mode without saving anything.  I tried to register at the media card and internal storage. No help.  Also, today I tried to make a recording of the voice.  He records and plays even recording, but as soon as I get out of the app, it disappears. I even renamed default name and it closed and opened upward and there is no record.

  BTW, I'm running OS le.90.

  Thanks in advance

  .90 has a camera bug.  Upgrade a.99 ID as the camera works perfect also the recorder works correctly also.

• USB ports not recognizing any device

  I plugged into multiple items - iPod, iphone, USB keys.  Nothing is recognized.

  Hi kslicho

   

  1. What is the exact error message you get when you try to access devices?
  2. for how long have you been faced with this problem?
  3. have you made any recent changes on the computer?

  Method 1:

  You can even check if you get the error messages for the devices in the Device Manager. Please refer to the below steps.
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b b.. in Device Manager, look for the device and then right click on the name of the device and go to properties.
  c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.

  Method 2:

  You can even check if uninstalling and reinstalling USB drivers to connect the hard drive. You can disconnect all USB devices and then perform the following steps:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (c) in the Device Manager, double click on extend "Controllers of Bus USB", right click on the host
  Controller, click "Uninstall" and then click on 'OK '.

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

   

  I hope this helps.

• CD/DVD drive not recognizing cds or dvds

  My CD/DVD drive does not recognize all of a sudden when there is a CD or a DVD of any kind inside: music, movie or data. I have a 3 years old Dell Inspiron 600 m. I checked my device manager and it seems that I have two numbers of brands/models: Philips CD-RW/DVD SCB5265 and SCSIVAX DVD/CD-ROM-ROM SCSI CD-ROM device, but I do not know what means the name of the second, or if I've never used.

  I run the custom, Diagnostic test and I was unable to run the reading test and get the test because he claims that I did not a digital inside the CD, even if I tried to put in a two burn data CD and a Dell Drivers and Utilities CD. I got an error message saying "error code: 0F00: 2874." MSG: optical drive BIST - pin test failed. »

  Help please?

  
  

• Not recognized in the DVD player

  HPg60 120 us laptop, Vista operating system. Whenever I try to play certain DVD, I get an error message telling me that there is no DVD in the player.  If I want to play a DVD, I should insert it in the drive.  I noticed that some DVD play when others do not.  Is there a way to solve this problem online?

  Hello

  Sounds like the DVD, the player, or both have a problem.

  With the help of HP, their books online, check the drivers, diagnostics and ask questions in the forums on
  known issues with the drive.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer not recognizing the cd/dvd.

  MY HP computer do not recognize cd/dvd = when I go to Device Manager and double-click Properties it says Error loading driver (error code 19)-
  I have windows vista home edition/i tried to go to the Device Manager and on some suggestionn those of the United Nations since the CDROM
  then re booted.
  It shows in Device Manager - but always watch - sign and sign - yellow
  without change and the same message as above
  Help, please

  Hello
   
  1. have you made changes on the computer recently?
   
  The unit will not work properly if the driver is damaged or can not load the Windows generic driver. To resolve this problem, try running Microsoft Fixez_ the. Visit the following link to download the fix it: http://support.microsoft.com/gp/hardware_device_problems
   
  You can also run this fix if the still lingering question and check the result: http://support.microsoft.com/kb/314060
   
  If the problem persists, then please contact the manufacturer of the system for more support.
  http://h20000.www2.hp.com/bizsupport/TechSupport/ContactHP.jsp?
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro A100 is not recognized any amount of RAM

  Hello

  I have a Satellite Pro A100 and I just bought 1 GB of additional memory. There are two locations, each with a capacity of 1 GB.
  When I put the new memory into the slot and the old 512 MB original memory in slot B and the computer says it is 1 GB.

  I have them two-way round so that the 512 MB is has the 1 GB in B. Now the computer says that there is 512 MB.
  Is there anything I can do to work B slot? I have the latest version of the BIOS update.

  Thanks in advance.

  Hello

  > original 512K of Ram also works in A slot, but not in the housing B.
  This looks like your slot B is defective, mate :(

  I think that, in this case, you can't. You can swap the card mother but that s all.

• I did not receive any cd/dvd with my alpha 3000. How to make a so that I can process Raw images?

  My current processing software, Corel PhotoPaint X 6, will not process the Raw files of my new Alpha 3000. Sony support, I read that there are programs to manage the latter on the disc supplied with my sony camera. However, no disc came with my camera. How can I get a?

  Glenn Runyyan

  Hi gsrunyan, please check the link below to download the application: Sony® Image Data Converter (version 4.2.02) which will allow you to convert RAW files.

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ILCE3000KB&upd_id=8260&os_group_id=23

  So you can click on the link below to find out how to convert the files after you install the software on your computer.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/33712/c/65, 66/kw/raw%20files

  If this post answered your question, please mark "accept as a Solution.

  Hector.

• Tecra M5: UJ - 841 s not recognized as DVD/RW by any burning software

  I've seen on other posts that it is common that the drive to be identified in Device Manager as a DVD-RAM (which is what's happening) but my DVD multi (on a Tecra M5) burner is not recognized by any DVD burning software.

  Is there an update or driver that I should have?

  Thank you

  Hello

  My first question: do you use the Toshiba OS since the Toshiba Recovery CD?
  Have you install and use multiple applications all burning?

  To my knowledge the practice he s not advised to use burning different programs together.
  You must use only one. I recommend Nero. It s nice.
  If the sonic is installed on the HARD drive, try to remove it and use only nero.

  If the drive is not able to manage DVD media, you should check the different brands.