Note Book PC not start

Similar Questions

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• SIL flashes once every 6 seconds mac does not start

  My mac book pro end 2011 running El capitan (not sure what version of El Captain) short charges a month ago, when my charger is broken... somewhere, I'm the charger at work now (after a month, it was completely empty until about 2-3 days ago), he would not start I can not reset nvram or smc as the mac won't even turn on.

  If without connecting the charger I press the power button or indicator, nothing happens, but if I connect the charger, then press the indictator of costs it market showing no charge as Whiteout pressing me the button power mac continues to try to start the ISL flashes on the left, the fan turns, there is a noise coming from the hard drive the screen is completely black and this is repeated every 6-7 seconds...

  I thought that it was because the battery was completely discharged so I let it charge for 4 hours the first day then for about 6 to 7 hours the second day then topic 2-3 hours on the third day it was yesterday, so I read a tutorial or something online that said to hold comand, shift, option, r, p and the power button at the same time for 10 seconds and then let it, and press the power button Yet once I did this, but nothing happened, it was in the same loop, then I repeated the process without holding shift it wasn't too then I held command, t nothing happens so in desperation I held the power button for about 10 seconds, the fan has started a lot of dust exploded and fun trotted it started normally then I ran a virus scan and a control of being using bit defender, nothing was wrong with the results of bit Defender, I will attach be check the results soon... all the while there was an X mark on the indicator of battery... then I restarted the mac and he returned to its previous state, I've tried everything to run back removed the disc hard cords battery cables and cd drive leads to the Board and tried to boot with various combinations of even (what I did the day I got the charger is working IE the first day, but two trials failed to produce results and my mac is back on the loop and I'm sick using a phone to post my question) , I am not able display the screen shots I ttok the activity monitor and the edition of text file that I saved with being check the results I copied both of them on my phone so that I am able to provide using any other method, I would really appreciate if someone can help me

  I found a way to solve this problem! This is only a temporary fix and it dosent charge the battery, but I can use the mac on AC only when it is plugged so that's how it happened the charger is plugged into the mac and socket is in the same loop as explained above, then when I remove the battery leads to the mother board or logic board do not know who , but one at the top, then the mac tries to start u see the Apple screen and then it turns off back. Then after a few seconds the fan starts and SIL flashes 4-5times and turns off, then starts again now, when I connect the battery cables again once (while the lights flash) now it starts perfectly and without brand X on the battery icon it shows not charging and the task kernel upward a big piece of my ram There is absolutely no free ram, I found the culprit core task and it is a process owned by the root, that it was something like coreutd I have strength that quitting smoking and the RAM is free as usual when I restart I have to go through all these things that I've done to start the first time and this time another process owned by the root with the task of kernel so I stop and ram is normal again every time I restart the ram is completely sold out

• Sports Watch do not start

  Sorry, im a German, my English is so good also.

  I have a watch of Sport by Apple. Tracks Abbout a Halve jear without problems. Last Friday the battery goes down and I forgot to start the watch of loading.

  I can't start with the watch. It is completely dead.

  Also pushing the Crown + button at the same time on 10 sekonds brings without success. She's DEAD.

  Y at - it everyone who can help me... ?. ??

  Thank you very much and greetings from the Germany

  Guten Tag, Gerhard!

  Try to charge your watch for at least 2.5 hours - and preferably longer (maybe let it charge overnight). In doing so, make sure that you follow the instructions here:

  Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -Then try force it restarts again (pressing the two buttons until you see the Apple logo).

  - Apple Watch neu starten - Apple Support

  If it still does not start, I suggest that you contact Apple technical support or make a booking Genius Bar in order to have your watch checked under warranty:

  Contact - Support official Apple

• SOLVED: Why don't Satellite 4090XCDT does not start with DVD-R/W drive?

  Hello
  as I said in the other thread that has already been closed, I bought a used Satellite phone who would not start of 3rd party DVD - RW (Quanta Storage SDW-042) included, even if Windows couldn't read well enough.

  I found out why, starting with the help of the user answers in the other thread.

  In the user manual, there is a description in the capitel on the configuration of the system about tconfig, which proved to be a valuable indication: HDD = Primary IDE (1F0H/IRQ14) (...), CD = secondary IDE (170 H/IRQ15). Compared to my desktop, it seems to me that two readers need to be masters on no. 1 and no. 2 cable, not as master and slave on the same cable from HARD drive. So, my CD-ROM would probably be master.
  Then I did the research further into the issue and found out, that there is no CD-ROM where select things cable if they are master or slave. Then I found in
  http://www.dschen.de/laptop_brenner/ a note in his Toshiba Satellite Pro 4290, seemed to be no Cable Select and his planned book on the CD (or DVD player, he wants to use) as a master.
  CSEL means that 47 Pin is connected to the Earth, which he did by applying a drop of Tin from Pin 47 to 49, pine, which is also Pin 47. I tried the same thing and disassembled the DVD drive that was in my notebook. (My record to disassemble my laptop and all editing again properly is now gone in 50 minutes). And know what, my Satellite 4090XCDT can now boot from the DVD-RW!

  To perform the task, I needed a screwdriver of the watchmaker to open the DVD RW (three live, then you need to insert a PIN to open the tray and see the back), a 12 Volt type iron pin solder for SMD and I ordered the strap of welding with a stereo microscope, so this task is not negligible. See the link mentioned to know what pins are bridged (sorry, the website is in German but the picture is clear: in the top row of pines, only you can see, the 2nd and the third from the right). And of course with a replacement part "scrap", you could give your laptop a second life, but you run a risk, because you may not know what you have, master or slave (for firmware or hardware), broken in any case, select cable - and one other Web site indicates that they looked up to 17 variants of firmware in exactly the same drive , depending on what laptop, it was intended for use.

  Nice display. Thank you very much.

• Pavilion dv7-6101eo works but does not start.

  My laptop got a cup of black coffee on the keyboard.

  I have cleaned up a bit, disassemble the entire laptop, same cpu, added new money and put the brand new togeather. Started and everything worked. Close the computer laptop domw - dead. Could not start without flashing, nothing. Repeated picking hand everythung once again and began. Works perfekt press start and go. So this time I made a recovery and reinstalled everything.
  
  The keyboard does not everywhere, a, s, d, f, e, l and Swedish letter o does not work very well. I don't have much contact for helmet properly not work either - you get a bit of his, but a little in the speakers and phones. I forgot to check the sd card reader, but here, it is located in the corner of a speaker.
  
  Onece I disassembled except mobo and this card reader and then the laptop is not started. I had to do it all again and he began. So now I'm a little confused to what it can be?
  
  It does not remove batteri, pushing start button. Not 15 seconds - not even 2 minutes. I know that battery, power cord works fine, cd, network, hard drive, memory, fan, cpu - everything works and yesterday the laptop running 24 hours without dysfunction at all. Programs installed and revived over and over again. And after all that I closed the laptop the way you should. And - he won't do it again?
  
  There is a possibility that some power is left in the drive cd-card or something that stops the laptop to boot? Or is it enough that the keyboard is malfunctioning? I don't understand what it is with the disassembeling process that makes the laptop to start.
  
  It's not fun to have all take part whenever you want to start your computor ...

  Looks like the coffee did more damage as you thought.

  You should have dismantled it and used contact cleaner everywhere where coffee could go.

  The next step is difficult for most people: allow to dry for at least a day outdoors in a dry place without danger... It is unfortunate that you don't have that.

  Consider looking for a replacement book.  A motherboard and keyboard options, less the cost puts you upside down against the current value of the laptop.

• Satellite U920 ultabook-Tablet does not start

  Hello world.

  Just bought the new laptop / Tablet 3 days ago.
  Other than Windows 8 fustrating me death, computer is wonderful...
  until today.
  Does not start!

  Turns on... but now those at home...
  I tried with the battery, but also the decision-making power.
  When I press the Start button...
  2 / lights go on as usual.
  Keyboard led lights as well.
  A that's all what happends...

  Finally, after a minute, the computer will beep 3 times slowly then close.
  No screen at all... not even a light coming from the screen...
  Quite annoyed that its only 3 days...

  Any advise?
  See you soon... Rob... Sydney

  > Just bought the new laptop / Tablet 3 days ago.

  The new book should work fine if it s not the case, then the hardware or software causing the problem.
  I think that it s material so why you n t contact your laptop dealer and ask for the new laptop.
  Replace this unit and test a new

• Satellite A100-570 not start - error PXE

  Hi all

  Please, please help!

  A year ago, my laptop started showing me the following details:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I couldn't find a recovery disk so left and used my desktop at home.

  Today all around the rooting, I came across the disc and made a successful recovery. However, due the siezing iTunes upward, I had to reboot my PC through the same question. I tried to restart the laptop several times to nothing does not.

  I need this laptop as a large part of the content of a book I'm writing on this subject.

  HEEEELLLLPPPPPP!

  Hello

  This error is displayed because the laptop could not start from other sources such as LAN.
  PXE means that laptop is trying to boot from LAN and Media test failure, check cable means that OS could not be started from source LAN.
  Maybe your HARD drive is bad and you need to replace it.

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?

• Mail does not start after the update of EL Capitan 10.11.2

  Many applications do not work (do not start) after my Mac Book Pro with El Capitan 10.11.2 update:

  -Mail

  -Time Machine

  -App Sore

  How can I fix this?

  -First data backup. Since you said TM does not work you will need to use another method

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost.

  How to reinstall OS X on your Mac - Apple Support

• Laptop does not start the screen to the top/black/blue

  Laptop will not start. HP Elite Book 250. Doesn't boot. Tried start run but says departure until a failed. Help, please.

  Hello Everlast87,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Since it a commercial product, you should post your question on the card for laptop of HP Enterprise Forumsfor more information.

  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• HP envy 4 pc does not start

  My hp envy touch ultra smart Book 4 with windows 8.1 does not start. I turn on a blue after the hp logo appears and he did a restart to collect some error information. Restarts, then shows another blue screen saying pc could not start properly displays error code: 0 x 0000001. I have no idea what to do. I tried advanced options on the start menu and none works. Help, please. I'm willing to lose all data and restore the factory settings. Thanks in advance

  Hello

  See if this will help.

  Did you create HP recovery disks or HP USB recovery disc?

  If not, then please consult this HP documenton the recovery of your PC. Select "recovery of your laptop. The instructions are to win 8 but apply to 8.1 Win.

  You will lose all data.

  Have you tried refreshing your PC?

  You can consult this HP document on testing your PC for hardware failures.

  Jaco

  I'm not an employee of ch *.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Web server does not start

  I get the following errors in the log file:

  default: 2 appwebStartThread starting named host: "LabVIEW".
  default: 1 appwebStartThread error: could not open a socket to 192.168.1.2, port 80
  default: 1 appwebStartThread error: HTTP cannot listen on 192.168.1.2:80
  default: 0 appwebStartThread could not start the server
  default: 3 appwebStartThread wire coming out appwebStartThread (10ac)

  the complete log file is attached. Does anyone have an idea?

  Thank you friends,.

  He is currently working. I used the command netstat /i and found netstat n which gave a list that contains among others:

  TCP 192.168.1.2:1528 74.125.79.103:80 CLOSE_WAIT
  TCP 192.168.1.2:1695 216.49.94.13:80 TIME_WAIT

  Whois for these ip addresses showed that Google and McAfee using port 80.

  I then started the Web server with port 3363, which is the default value for the VI Server Configuration. The web server log file showed now:

  default: 2 appwebStartThread for HTTP listening on *: 3363
  default: 3 appwebStartThread wire coming out appwebStartThread (16cc)
  and OK.

  BUT as C:\Program NIUninstaller Instruments\LabVIEW 8.6\ www\index.html says:

  If the Web of LabVIEW server does not use port TCP/IP 80, enter the following URL in the address field of Web browser (where port is the port number that uses the Web of LabVIEW server): http://localhost:port / examples.htm.

  Now the two example: creating a Web Service (Windows) of the help of LabView and the book.lvproj work address OR example finder.

  Thank you once again,

  OLE

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• will not start up not according to any hard drive test run and it says replace was 1 he did no road noise

  Compaq presario cq 70 note book pc does not start test and say no disc replacement hard drive 1

  He started toward the top of loadede windows stopped it itself turned off then would not start have to take the battery out to turn it off now

  Looks like your hard drive has failed. Remove the hard drive and attach it to your desktop as a 2nd hard drive and see if the bios can recognize the disc and if the disc is rotating.  If the bios does not recognize he or she does not turn, the drive has failed.  If the bios recognizes, he turns, a check disk can restore if you start.