will not start up not according to any hard drive test run and it says replace was 1 he did no road noise

Similar Questions

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• Dv5 does not load Vista, failing hard drive test

  I have a laptop HP DV5 with Vista - 2 years and more under warranty.  He had some problems with Windows Update error codes, I did a system restore to a point a little backward.  This does not solve the problem, so I tried to cancel restoring the system back to the State of our days.  This was fine, but then the system locked up when he tried to restart itself-it has attempted to restart for 45 minutes and got nowhere, so I turned off.  This throw Windows completely, as the system restore was not full yet, so now that my computer will boot the HP logo and start up options, but then get hung up trying to load windows (I have a black screen with a scroll bar down cycles endlessly with Microsoft Corporation written below)

  Bottom line - I can't get the computer to boot windows, and system recovery does not work.  Tried directly from the hard drive and vain and ordered HP-put one disk disks this morning, once removed from the HP screen, I get the bar "Windows loading files" at the bottom, which ends in about a minute, but then it just goes back to its normal load upward, with the scroll bar and Microsoft Corporation at the bottom of the screen.  So I can't open basically even the system restore window.

  I just ran the self-test of the primary hard drive and had hard disk Test do not.  I'm not particularly computer saavy (I didn't know that to do this test in reading this forum), if anyone can tell me what I should do next?  I don't want to go somewhere and get screwed!

  Thank you!

  -Becky

  Hi Becky,

  The result of the primary Hard Drive Self Test means your hard drive is defective and must be replaced.  It is the HARD drive in my dv5.

  http://www.Amazon.co.UK/320GB-Scorpio-WD3200BEVT-SATA-5400rpm/DP/B0013E0A0M

  Hard drive replacement is not difficult (generally remove two screws from the cover of the HARD drive on the bottom of your laptop, remove a futher two screws holding the disc in place then pulling on one leg to lift the reader.  Then unscrew the metal casing around your old drive - often called the caddy drive - attaching to your new drive, insert the new drive, fix it with two screws and replace the cover.  Then simply insert your recovery DVDs to load Vista on your new drive.  Here is a Youtube video showing this.

  http://www.YouTube.com/watch?v=8U23F8JuKKE

  I hope this helps.

  Best wishes

  DP - K

• computer will not install an external hard drive.

  my computer does not recognize my external hard drive enclosure. I went to fry and the internal hard drive and the speaker works. I brought my computer to a friend's House and he read it to his house. It turns out that I had to put the jumpers on CSEL. When I got home and tried to plug it in, it won't read it again. I tried to troubleshoot it and he said that my mass storage device has a problem with the drivers. the thing is, he worked at the House of my friend with my computer. I do not understand and it makes me crazy. the only difference is that the reader reads to my friend's House and won't be at the mine.

  Hi danny,

  Did you use the same cables in your home that have been used in your friends?

  The physical location being the only variable might mean that a wire or cable is loose.

  The reader must be reinstalled in the hard disc enclosure.

  I recommend that you check for loose connections.

  Your PC is connected to Internet at your friend's House?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• Vista will not initialize my external hard drive

  I have a hard drive that I took from my old PC (the disc is in the 3.5 series) and I bought a case for it so that I could connect to the laptop, I did that he is set to slave and went to initialize, but when I click on it it says "the device is not ready".
  The driver is up to date and I don't know what to do. Please help, thanks in advance!

  Hello

  · Do you think any yellow exclamation point in Device Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

• Vista will not access my external hard drive.

  I have a disk enclosure external hard iomega using a Western Digital 500 GB disk.  My HP Pavilion runs Windows Vista Home Premium (64-bit).  The first time that I have it plugged into my computer, it 'installed drivers.  Then gave me a message that it must be formatted in order to be used.  When I click on 'Start', it gives me a message that I will lose all my data on the volume; When I click on 'OK' I have 'Windows couldn't complete the format ".

  Using Windows Explorer, I don't see the player.

  Using computer management, I can see the drive.  Details: K:\;  465.76 GB RAW;  Healthy (Primary Partition).  If I right click on the blue bar, I can try to format.  I get the same set of messages.  I can open it through computer management, but I can't put any data on it: every time I try, I get "failed to find this article.  It is no longer in [location of the file].  Check the location of the item and try again. "It will search the file to open it on my computer, but not to copy it to the external hard drive.

  I know the drive works, as I bought it from a friend who has upgraded to a 2 TB drive.

  Hi Jason,

  I suggest that temporarily disable you security software to see if it solves the problem.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows will not activate after the hard drive is replaced on Windows 7 Home Premium.

  Recently, I had a hard drive crash and had to replace my hard drive. I took it to a computer to fix store, and they have installed and gave me a new drive for windows 7 Home premium. However, it was not approved, and I have no key validation. How can I validate windows now?

  Search for your key on the side of an office or downstairs (sometimes inside the battery case) of a laptop.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• system recovery will not load a partitioned hard drive

  Hello

  My dell inspiron on vista Basic has been sluggish, so I made a few stop hard downs.  After this, windows will not start and repair windows will work (on the start menu).

  recovery system cannot read the partitioned recovery drive (backup).

  Sometimes the system will display unknown hardware error d000144

  my laptop is only 3 years.  never buy a dell again.

  New programs are malwarebytes and windows defender.

  Hello

  Here is the information of Dell for the use of their recovery Partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And how to use the Dell Diagnostics software, as appropriate test equipment, etc.:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/Setup.htm#1100569

  As the Dell recovery partition is a Dell product, for other questions, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or ask in the Forums of Dell Support:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Windows 7 will not activate after a hard drive failure

  I tried the phone activation option and it will not work. IM assuming that it's because I reinstalled windows once before, the upgrade from 32 bit to 64 bit. Im not sure what to do and id prefer not to buy another copy of windows. My computer specs are as follows:

  OS: Windows 7 Home Premium
  Motherboard: Asrock Z77 Extreme 4
  CPU: Intel Core-i5 3570 k
  GPU: NVIDIA EVGA GeForce GTX 560 Ti
  Help, please! Thank you!

  Use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 will not install on my hard drive SATA III, even if the installer and menu of the BIOS are localization.

  The controller is enabled for all SATA connectors and the drive is one of the SATA 3.0 Gbit/s ports, I've heard is a way to get through. However, it did not, either. Can anyone help?

  Here is what I am dealing with, set up a few hours ago:
  -Intel DH77KC card
  -Intel Core i7 - 2600K 3.4 Ghz processor
  -Disk hard Western Digital 1 TB black
  -Corsair Vengeance 16 GB of Ram
  -Corsair TX650 80Bronze
  -Windows 7 Home Premium 64-bit
  It starts, and then Windows 7 gets no more than it will not be installed on the hard disk. I can't make a new partition, either, nor can I format the drive in the window. The BIOS settings do not exactly help because I'm not using RAID and FDI does not do.
  Maybe there's something wrong.

  Try to remove 3 branches if theyre 4 GB each. See if it installs. If so, put the 3 branches after windows has been installed

  This BIOS is on it at the mo?

• Recovery disks will not recognize my new hard drive

  Original title: why I can not reformat my upgrded from vista to w7 disk

  I can't reformat my vista upgraded to windows 7, as I tried to add another hard drive, which will not take my recovery disks. The message to reboot

  You try to add an additional hard drive or you try to replace the current hard drive with a new one?

  Recovery/restore disks are specific to OEM (made by the manufacturer that also makes your computer) unless you are lucky enough to actually have on the contrary an OEM copy of the operating system in question (Windows Vista I guess) and it is bootable and will guide you through a real installation of the operating system and not a "restore image."  What means what, is supported by the OEM in question for the method - no Microsoft.

  Now - you may be able to perform a new installation of Windows 7 using the Windows 7 upgrade media you have - depending on how you got it...?

• Win - 8 will not read my external hard drive

  My Win-8 new operating system will not read and allow access to my external hard drive although "Mgr. device recognizes his existence and said it is working normally."  The mass of Maxtor storage device icon.

  What should I do?  Three weeks have been wasted fighting this same problem replaced the external HD iMicro unit.

  Go to disk management and assign the letter of the partition on the drive (s).

• Muse will not charge upward, it is said to connect and then say an error has occurred.

  When I try to open the muse he will not load. It says I need to connect, but gives me an error msg.

  Hello

  Please follow the steps mentioned in this document:

  An unexpected error has occurred I - 200

  Concerning

  Sonam