Notice about the sticky keys

Separated from this thread.

Can anyone help please my windows 7 just began to show me a notice about the am sticky keys keys filters and I checked, none of my shift keys or the keys are apparently and it has been so hard trying to open any program or select something because it selects just a multiple icon as shift keys is pressed Please can any one help please

You probably hit the SHIFT key five times - turn it off off as shown here: http://www.techrepublic.com/blog/windows-and-office/quick-tip-disable-the-sticky-and-filter-keys-in-windows/

Tags: Windows

Similar Questions

  • Can I extend the "sticky key" function key "fn"?

    I need to use the 'home' and 'end '. On my ASUS keyboard, these keys must be pushed simulaneouly with the "fn". I have only one arm that is imposible. Can I extend the "sticky key" function key "fn".

    My computer is an ASUS UX31E.

    Hello WarwickZD and warwick1,

    The short answer is no.

    We cannot extend this functionality to the Fn keys.

    In order to get this kind of functionality, you would probably need to investigate the 3rd party software.

    Best regards

    Matthew_Ha

  • Keyboard locked after activation of the sticky keys

    Hi, I accidentally cut on my sticky keys. I hit the SHIFT key five times, according to the microsoft.com; However, it will not unlock. When I try to type, I hear a noise, but I don't see anything happening. Any suggestions?  Thank you!

    Hi lgriffith1297,

    Thank you for visiting Windows Vista Microsoft answers forum.

    Sticky keys are enabled on the computer and that is why you are getting the beep when you try to type something using the keyboard. You must disable sticky keys.

    To activate deactivate StickyKeys, follow these steps:

    1. click on start and then click Control Panel.

    2. click on 'Ease of access' and then click 'accessibility '.

    3. under "Explore all settings" click on "Make the keyboard easier to use".

    4. under "make it easier to type", uncheck "Turn on Sticky Keys" and click Save.

    Reference link:
    http://www.Microsoft.com/enable/training/windowsvista/StickyKeys.aspx

    Please let us know if it helps.

    Thank you and best regards,
    David

  • Qosmio F10: Question about the CD key and waste product

    I bought a laptop Qosmio F10 a year ago. However, it is only now, someone mentioned that is fails to my OS I will need to reinstall.
    They asked if I had the disc and product key. I said no. Why do not the two points mentioned above provided for me on buying?
    I'm just a user not an expert.
    All the answers at all would be appreciated.

    Hello

    It is strange that the laptop has been delivered without CD or DVD.
    Usually, you should get the media recovery, Tools & Utilities CD and possibly a Qosmio CD player.
    On the recovery CD, you will find the image of Toshiba. This image that you could install every time. The operating system on this image is already enabled and you don't need the product keys.

    If you don't have a CD you can order it from the service partner in your country.

  • A question about the SHIFT key

    I'm trying to force the text to capitalize or not into typing user function, but do not want to use a simple input field. Can I do something like the attached code along with a check because if the SHIFT key pressed isDown?

    Also, is there a reason that I can't use the delete key to perform an action - right next to her in bad shape? I found a simple trace but can't make it work:

    on {('< delete >' keyPress)
    trace ("hit");
    }

    Thank you

    Sorry for this question, I realized just after dumb how it was. Use listeners and ASCII key Code... duh.

  • Dell Inspiron hard drive has failed. After replacement and re - install Windows Vista, I noticed that the product key sticker is removed, and I can't read it.

    Hard disk of laptop DELL Inspiron my wife is dead! I have replaced the hard drive, but now realize the sticker with the activation of vista is so worn that I can't be a part of the code. Can I do short of buying another license?

    original title: code of Activation of Windows Vista

    If your tile is deleted, unreadable, then you must contact the manufacturer of your computer that is applied on the computer.  They can provide you with information about key details of the product.  -Karena R (Support Engineer)

    Activation of the FAQ

    http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  • I think that my hard drive has been infected by a virus, I don't understand. he refuses to install programs as basic as the Adobe reader, something about the missing keys or that i do not have permission. Help, please

    whenever I try to install a program, a program of games even it is said of the missing security keys (in a way he described the characters in them, a short letter) or sometimes says that I don't have permission to make these changes.

    Hello

    1. What is the exact error message?

    2 have you made any changes to the computer, before the show?

    Method 1:

    Run this fixit and check.

    Solve problems with programs that cannot be installed or uninstalled

    Method 2:

    I suggest you to run a virus scan and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: All data that are infected can only be cleaned by deletion, which means that there is a risk of data loss.

  • Question about the feature keys FN on Portege R200

    Hello! My laptop is a Portege R200

    I cleaned up my HARD drive and installing WXP Pro

    I downloaded all the drivers for the Toshiba site R200

    Now the problem is that there are two kinds a change of the device driver display

    I installed the first called TDspBtn and now I am able to get the LCD, LCD + CRT or CRT by pressing Fn + F5. I do not like this feature because theres no icon displayed as brightness oder speaker power.

    The other is TFnF5. If I click on it, nothing happens and the function FN + F5 is still the TDspBtn.

    ------------------------

    My next prob is the FN + F8 combination. I installed the driver from wirlesshotkey and nothing happens if I press FN + F8
    Normally using this utility you can switch of Bluetooth for wireless connection by pressing Fn + F8. If Bluetooth is not available, it will turn on and outside wireless lan.

    Please help me!

    Greetings from the Germany

    Hello

    It is not easy to give you the right answer because this FN feature does not depend on a tool only. The fact is that several separate components must be installed correctly.
    On the Toshiba download page, I saw that there are two different models of the Portege R200. I don't know which you have, but for each of them you will find the document Instructions facilities with the exact order of installations.

    So what you need to do is to install all the drivers, tools and utilities following this order of installations.
    If all the components must be installed correctly. After doing this, all these processes are running in the background and you can use all the functions FN.

    The same situation is for the FN + F8.

  • Notice about the winning price of microsoft

    I just want to know on this notification. I just won a lot of money to £1000000 for 35th anniversary microsoft microsft.

    This sample notification that I show you. It is true or not.

    Hello

    It is a very common scam.

    Please read this: http://www.microsoft.com/security/resources/microsoftlottery-whatis.aspx

    And this: http://www.hoax-slayer.com/email-lottery-scams.html

    See you soon,.

    Julia

  • Unable to turn on sticky keys permanently

    Most here want to remove the sticky keys... I am physically disabled and need to keep ON. I have only one hand (no fingers) so I need to figure out how get SK working full time. My PC will receive Symantec Endpoint Protection but SK call after endpoint connection is requested.

    I tried in my Regedit

    [HKEY_USERS\. Default\Control Panel\Accessibility\StickyKeys] "Flags" ="?"

    .. but I'm not sure of what value to put?

    Original title: invoking sticky keys

    Hello

    With the publication of the description, I understand that you want to enable the sticky keys on your computer. I've certainly you will help solve the problem.

    Sticky keys can be activated at any time during a Windows session (including the connection) by pressing SHIFT 5 times. You can also use the control panel to turn on sticky keys permanently, but it won't allow you to do this for the logon screen. However, it is always possible to do this by manually editing the Windows registry. But it's pretty hard in there and if you delete or change a value by any chance there is no cancellation function, and it can have devastating effects on your operating system. So to make things a little easier, you can use the steps mentioned below and check if that helps.

    Make the keyboard easier to use in Windows 7

    I advise you to follow the article mentioned below and check if it helps.

    https://support.Microsoft.com/en-us/help/14202/Windows-7-make-keyboard-easier-to-use

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

    Regards Ravi Kumar

  • I can't disable sticky keys

    I have a Compaq with windows 7 and stay lit and even if the keys i unchecked and re-check all options over and over again I may not go down and her do all really hard. If someone could help me as soon as it would be great. Thank you

    I had the same problem earlier.  Disabled and enabled the sticky key option again and again, rebooted the PC and nothing fixed it.

    In the end, I had to hold the SHIFT key for about 30 seconds without interruption, until you hear a strange noise of slope high.  This fixed it for me.

    Looks like a bug to me.

  • How to use sticky keys?

    I have rsi and coordination/proprioception problems, so I can't type without looking at where I tape and cannot coordinate both hands, can not use some grips and cannot use contact devices unless I can turn off the tapping and disable most of the movements. I also have migraines and sensory processing problems, and I can't handle all the flashing and some animations.

    I can type fairly quickly, as long as I can see as I type and all the key combos are not suitable for the same hand.

    I turned on the StickyKeys in the accessibility preferences, as many combinations of keys are designed to both hands and * all * the combinations of keys + mouse are.

    I had problems, however.

    Sometimes the keys get stuck on and I find myself with extra earplugs while typing or missing caps, or worse still, I find myself with something of my migraines trigger and zoom. for example command + scroll touchpad does.

    Also the keyboard and the keyboard Viewer do not work together. I can't use shift a keyboard, and then click the appropriate on the other letter.

    Are there ways to solve these problems? Yes, the keys appear on the screen.

    Hi, have a problem with keys sticky, but in my case in combination with voiceover active: whenever I press a modifier (ctrl, shift, etc.), voiceover announces the sticky keys are enabled. It's so boring that I can't be happy with my macbook air and imac. I'd also like capslock key, acting as a sticky when voiceover modifier key key is assigned to capslock in combination with sticky keys are enabled. Many emails to [email protected]wrote, but I received nothing promises / automated responses back. Please help us somehow! Thanks in advance, Helmuth

  • 2015 Macbook: keyboard product strikes without touching (for only the T key)

    I have a Macbook or 2015 in perfect condition, original owner, never damaged, still under warranty. A few months ago, I noticed that the T key would occasionally insist on its own. With nothing, contacting the keyboard, keys T would have picked up.

    There has been sporadic for a few months, then a few weeks ago, it became much more common. I only use the computer because I disabled the T key using the carabiner and remapped Cmd + 5 so that it sends that t. typing is not easy, so maybe you can forgive me if my message is short?

    Has anyone experience this problem or have any recommendations? Thank you!

    Could be something as simple as small pieces of debris that may have gotten

    trapped under the key - and once there, could interfere with spring

    parts below. You could read through another debate where I made

    post links to some sources on how to clean the keyboard without taking

    Apartment. With... canned air that one is an Apple support article.

    There are also other links to the iFixit site where the keys of the keyboard are

    shows removed and the section of spring is as well. There were two answers

    to the original question of the user because the first expired while I did some research.

    Re: Enter issues -problems of keyboard macbook 12 inch retina

    Re: Enter key 2 issues -key-face and spring cleaning info button

    Details to some extent are covered, and there is also a link to consider a

    Appointment of genius Apple Store, if you want them to look over

    and they may be able to clean it up during your reserved time; or, if

    no official retail Apple Store is available, maybe (if you do not want to)

    an Apple authorized service provider may; a genius would be free of charge

    to watch over and examine it. Under AppleCare, likely repairs are covered.

    However this is equivalent...

    Good luck & happy computing!

  • Startup Repair... He had to find the product key

    Got a Vista computer that starts in the startup repair all the time no matter what, even in safe mode. I click on this pagehttp://grab.by/7Sse and nothing works to be able to reformat the computer.

    Fortunately, I got the Vista installation DVD, but the only problem is I cannot find the product key for it, is there an easy way to get it back? I live Linux disks so I can do it like that. I tried a few programs through wine and neither work.

    These are the programs I've tried under wine on Fedora:

    http://www.NirSoft.NET/utils/product_cd_key_viewer.html

    http://www.magicaljellybean.com/KeyFinder/

    Any help is appreciated in trying to extract the thanks :) product keys

    Hi Banjo348,

    Method 1: You can follow the steps mentioned in the article below and check if this solves the problem

    Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
    http://support.Microsoft.com/kb/934540

    If the problem persists, contact the computer manufacturer

    About the product key, please see the article below

    How to identify, locate, and replace a product key
    http://support.Microsoft.com/kb/811224

    To replace a Microsoft product key, contact Microsoft and support Customer Service.
    http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

    Important note: This thread contains a reference to third party World Wide Web site. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

    I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

    * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

    Hi jsserrano68,

    Read the following article about the product keys for Windows:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

    In addition, if you need to contact Toshiba support:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

    Thank you

    Deb

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for