Notification by email if remote display could not access

Similar Questions

• "Error 720: a connection to the remote computer could not be established.

  Earlier, it was working fine. One day it stopped working. I don't write my windows key and the serial number of HP for reasons of confidentiality, but it is authentic.

  I use Windows 7 Home Premium on my laptop HP bought 4 months ago. While trying to connect to internet through my USB data card (I use Auntie Photon +) I get an error message "error 720: a connection to the remote computer could not be established. When I connect the same device to another laptop, it works fine. The USB card company suggests that it is a matter of TCP/IP and I need my OS resintall. I don't have any CD of windows with my HP laptop. I tried to restore my machine, but that did not help. Please help me.

  Hello

  Do the methods and check if this solves the problem.

  Method 1: Try to run the network troubleshooter, check the link for more information on the same.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method2: You can try the steps outlined in the article and check if this gives a probable solution.

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Reset Internet Explorer WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• The user * address email is removed from the privacy * could not connect, could not access the directory.

  For the second time in the last two weeks going through my event logs, I noticed several hundred newspaper failed attempts at the course over a period of twenty minutes.  they are random user accounts that don't exist not user 1, user 2, www., or just names at random, the papers say newspaper caused by a wrong password or account.  "the first of these events several connected has this message:" user * address email is removed from the privacy * could not connect, could not access the directory. ».  What does that mean?  Do you need access and control my computer?  Any info would be a great help.

  Looks like someone trying to log on your computer.  Check your firewall settings to make sure that they can't.

  Visit https://www.grc.com/x/ne.dll?bh0bkyd2 the site "shields up" to perform a check.  Some people to dismiss the guy who runs it, but the test doesn't show you which allows your computer to the world to see.

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• I get this message: "the remote computer could not be found" when I try to run Task Scheduler.

  * Original title: Task Scheduler

  When I try to run Task Scheduler, I get this message: "the remote computer could not be found" any help would be appreciated.

  Hello

  Start button-> type to find Services at top and double click on Services

  Locate Task Scheduler - right-click - Select start.

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• RSAC can't disable remote Firewall errors "could not access ServerName, the network name cannot be found.

  I opted for the "Restore default settings" option in the firewall while working on a client-side computer. For this reason got disabled the option "remote share' and now I can't access the machine remotely. The machine (which is not in the same network) does not monitor or keyboard attached to her and her to a different location so I can't physically connect you and activate this option.

  I tried to disable the firewall remotely, but the following command does not work.
  PsExec \\hostname u user_name password cmd.exe Pei

  It returns the following:

  Could not access ServerName

  The network name cannot be found

  Make sure you share the default admin$ is enable ServerName

  This fact has not resolved the question above.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\ and create or edit a REG_DWORD LocalAccountTokenFilterPolicy value and set the value to 1

  Help, please.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking%2Cw7itprovirt&filter=AllTypes&sort=lastpostdesc

  Hope this information is useful.

• The class or interface 'mx.remoting.Service' could not be loaded.

  Flash 8 has been reinstalled on a new update of the machine. Application using flash remoting may not be updated after this new Setup error when you try to publish the application is:
  The class or interface 'mx.remoting.Service' could not be loaded.
  is it because I don't have the "Flash Remoting for Flash 8 ActionScript 2.0" extension installed?
  and if so do I have to re buy this or it can be reinstalled from the old hard disk of the machine replaced? wouldn't be a *.mpx file?
  The application works, but I can not publish any new changes without getting that error. and this has started since my machine has been updated... so I hope that this is the problem...
  Thanks in advance...
  Chuck
  

  Flash remoting components are on the site of adobes by download here

• How to fix "error 2738... could not access VBScript runtime for custom action' tries to apply the update to my service of Incredimail.

  How to solve the following problem found while trying to download an upgrade of my Service of Incredimail.

  "Error 2738...". could not access VBScript runtime for custom action"

  The most likely cause is the antivirus bloocking the script.

  Check your AV settings (AV is?)

• Cannot install Skype - Message: «could not access network %APPDATA%\protector.exe location»

  When I try to install Skype install, I get this message 'could not access the %AppData%\protector.exe network location.

  The instructions in the link below has helped a couple of Skype users. Give it a shot:

  http://www.gracecentered.com/christian_forums/computer-assistance/Skype-install-error-1603/

  http://Forum.Skype.com/index.php?showtopic=769863

  Uninstall and remove all traces of Skype before installing the new version. Remember to remove all temporary files on your computer too.

  Instructions to uninstall:

  https://support.Skype.com/FAQ/FA10634/how-can-I-completely-uninstall-and-then-reinstall-Skype?FromPage=search&q=uninstall+Skype&fromSearchFirstPage=false

• Error 1606: Could not access network location % APPDATA%\.

  I am trying to install a game for Windows: Zoo Tycoon 2 Ultimate Collection (which is Zoo Tycoon 2 + 4 expansion packs), on a Vista Home SP2 machine.  When you install disc 1, I almost immediately get the error above,Error 1606: could not access network location % APPDATA%\. I looked at the error on this forum, who led me to the installation page for the installation package located manual download page offline at the: http://www.java.com/en/download/help/error_installshield.xml. When I tried to install the offline installation package, I got the same error, 1606.  I don't know what to do next?  This game comes without a product key, this support won't even take my call.  Thank you-

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 1606. Could not access network location %APPDATA%\protector.exe

  Whenever I try to install itunes on my computer, I get a pop up that says "Error 1606 could not access network location %AppData%, I can't figure out what to do, I went through the whole" go to start, click on run, run Regedit.exe, go to HKEY_CURRENT_USER--> Software--> Microsoft--> Windows--> the current Version--> explore--> User Shell Folders and ive made sure everythings it and all its how its supposed to be. ' " I have no idea what to do. If anyone knows how to fix it please do not hesitate to post something.

  Thanks to anyone who helps

  Tjballer94

  Run the FixIt from this page:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Could not access network location %APPDATA%\microsoft\windows\sendto during the installation of QuickTime for iTunes

  I get an error message "could not access network location %APPDATA%\microsoft\windows\sendto" when I try to install iTunes.  It always happens during the installation of quicktime.

  Hello m.minton,

  You can watch the following information from Apple on the installation of QuickTime:
  http://support.Apple.com/kb/HT1926

  Please let us know if the information of Apple Help or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• could not access vb run time for custom action script

  I have windows vista Home premium installed on a HP Pavilion laptop dv6-1030us entertainmeny. I am trying to install a mobile usb broadband telstra for internet connection on my lap top. the installation process starts, but is abandoned with a message ' could not access Vbscript run time custom action. I looked upward for solution of line and followed who asked to change the registry for vbscript.dll. I followed the instructions but the problem has not been resolved. The next set of instructions was to permanently remove some keys: current user/software/class/CLISD which I tried, but ended with an error.

  Hello

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/1a4499ae-8bc1-4534-9c6f-4d399ac70d9a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-2738-could-not-access-VBScript-run-time-for/0ffd532e-a3e0-4738-8601-38c46e69e238