Notifications by email of Dell OpenManage?
Someone at - it a .exe program that can be triggered (by using the "Execute application" under the "action alert") to send an SMTP email, if there is an alert in OpenManage?
Would be really nice if a simple SMTP messaging capability built in OpenManage...
Thanks for any help!
Tags: Dell Servers
Similar Questions
-
The Dell Openmanager on Esxi5 server administrator
Guys,
I'm having problems installing software from Dell (Dell OpenManage Server Administrator) in one of our servers that use a VMWare Esxi 5.0 operating system
Dell OpenManage is a software management that allows a proactive monitoring, diagnostics, and notifications on the server hardware.I'm following the procedure indicated by the Dell documentation:
http://media.community.Dell.com/en/DTC/attach/omsa6.5%20For%20esxi5_kb.PDF
starting on page 13 (installation of Server Administrator for ESXi).In the manual, we have 2 ways to do this:
1. using the vSphere CLI
After it we have this result:
C:\Program VMware vSphere CLI > esxcli - Server x.x.x.x vib software install/var/log/vmware/Dell_ d
OpenManage_ESXi_OM650-offline_bundle - 467660.zip
Enter the user name: root
Enter password: *.
Result of the installation
Message: host is not changed.
Restart required: false
VIBs installed:
VIBs deleted:
VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000No changes were made.
2 - using the VMware vSphere Management AssistantAgain, we have the same result:
Enter the user name: root
Enter password: *.
Result of the installation
Message: host is not changed.
Restart required: false
VIBs installed:
VIBs deleted:
VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000Anyone has any idea on what could prevent installation VIB? Attached is the installation package.
Hello
Please check out the original VIb file and you'll get another VIB file inside by the name Dell_OpenManage_ESXi500_OM700-offline_bundle - 643291.zip.
Using the vSphere CLI
1 copy the Dell_OpenManage_ESXi500_OM700 - offline_bundle - 643291.zip
file to the var/log/vmware/Dell_OpenManage_ESXi500_OM700-offline_bundle-643291.zip.2 close all comments on the ESXi host operating systems and run the ESXi
host in maintenance mode.3. If you are using Windows, go to the directory where the vSphere CLI
utilities is installed and run the above command
to step 4.
If you are using vSphere CLI on Linux, run the command in step 4 of
any directory.4. run the following command:
esxcli - Server
install software vib d/var/log/vmware /.<>
OpenManage file >5. type the username root and the password of the ESXi host when you are prompted.
The output of the command shows a successful update.6. restart the ESXi host system.
Use software esxcli software esxcli or get vib vib list to confirm the installation.
-
Dell OpenManage (64-bit) Version 8.3.0 systems management software
Dell OpenManage Systems Management Software (64 - Bit) Version 8.3.0 will work on a server of PE2900 running Windows Server 2008 R2?
Dell OpenManage Systems Management Software (64-Bit) Version 8.3.0 Hello
I'm afraid that OM 8.3 does not support PE2900.
topics-CDN.Dell.com/.../Dell-OpenManage-Software-V8.3_support Matrix_FR - us.pdf
Note: This forum is dedicated for OpenManage Essentials. In the future please post your query on OMSA on respective forum for quick/prompt response.
-
Dell OpenManage, ESXi 5.1 &; reconstruction of bays RAID online
I am owner of a Dell PowerEdge T420 with ESXi 5.1 installed and I was wondering if it is possible to rebuild a RAID array without having to restart the server.
I was under the assumption that the use of Dell OpenManage running on Windows Server together with the Dell OMSA VIB would allow management of virtual disks when the system is online.
I am able to see the State of health of the RAID via OpenManage arrays, but can't seem to perform management of tables.
I was mistaken in that assumption?
Jmartincic,
You can simply reinstall the failed drive to start a regeneration. In the OMSA with ESXi graphical user interface, it's only a tool of surveillance. You cannot trigger something from him, although only with regard to the controller.
-
IBM Director is similar to DELL OpenManage?
Hello
We use DELL and OpenManage Server for a few years.
We will use IBM X 3650 server to run the new ESXi host. We would like to know if IBM Director is something similar to DELL OpenManage? Wouldn't be a free download?
In OpenManage, it is necessary to install the agent on ESXi host and use OpenManage on a physical server to access these agents on ESXi host. Since we don't have server IBM, how these agents on IBM server are accessible?
Your opinion is requested.
Thank you
IBM Director is free for the basic material followed (if the hardware is IBM).
From what I remember that the server software is free and each piece of the IBM of hardwre that you buy - includes a license for the control of internal agent server IBM Director software.
As said above for more sophisticated functions that there is an additional cost.
Most of the management will be through the IMM (term of IBM for DRAC / ILO).
You may be required to install some specific VIBs IBM or a custom of the ISO http://www-03.ibm.com/systems/x/os/vmware/esxi/
Maish
VMTN moderator | vExpert
-
Dell Openmanage 6.3.0 on ESX 4.1 error
Hello
I try to install Dell Openmanage 6.3.0 (OM-SrvAdmin-Dell-Web-LX-6.3.0-2075.ESX40.i386_A00.11.tar.gz) on my R900 server that has ESX 4.1 installed on it, but it fails with the following error:
Error: Verify if Dell OpenManage media are corrupt.
If you use the Web pack to install Dell OpenManage
Make sure that you use the corresponding Web pack to the
architecture and operating system on your system.
Anyone got working on ESX 4.1 openmanage?
Thank you
Pieter
This one is for ESX 4.0. Try this one.
http://FTP.Dell.com/SYSMAN/OM-SrvAdmin-Dell-Web-LX-6.3.0-2075.ESX41.i386_A00.12.tar.gz
-
Hi all
Does anyone have the link for the latest version of Dell OpenManage for one PowerEdge R710? I need to install it on one of our servers, but can not find the link anywhere on the site of Dell.
Thanks in advance
Russ
http://FTP.Dell.com/SYSMAN/OM_6.2.0_ManNode_A00.tar.gz
I used the 6.2.0 version without any problems.
André
-
Dell Openmanage 6.1 reports SCSI errors in the console, what do mean?
We have installed 2 new Dell servers with VMWare ESX 4 and also installed Dell Openmanage 6.1. So far so good, dell openmanage seems to work very well, we get not errors in starting services. But we get strange message (see screenshot) every two seconds the kernel in the console, including reffer a sort of sici device. Does anyone know what this message is about and how get rid of?
Thank you.
Looks like you are having the same problem I had with of my new race ESX 4 and Openmanage 6.1 R710. I found myself by opening a ticket with Dell and they came back and said that there was a problem with the inventory collector. Specifically, I think it has something to do with the FCAC as I recall the conversation.
They do the following and it solved the problem. Oh and put the host in just in case maintenance mode.
CD/opt/dell/srvadmin/cm/invcol
MV invcol invcol.bak
srvadmin - services.sh reboot
At the time, Dell had a tentative date of update OpenManage to solve the problem.
Ray
-
Installing dell openmanage 6.1 on esxi 4.0 (released).
I noticed that dell management is available for download:
Dell OpenManage VIB for ESXi 4.0
On the directions of installation, it lists:
Customized for oem-dell-openmanage - esxi_6.1 - 0000.zip instructions:
##################
1) download the appropriate package of RCLI (Remote Command Line Interface) of http://www.vmware.com/download/ If your system runs on Microsoft Windows or Linux.
(2) copy the Dell OpenManage bundle into a directory on your system.
(3) use the vihostupdate command. If you use Microsoft Windows, navigate to the folder where you installed the RCLI utilities to use this command. If you use Linux, this command is installed when you install the RPM RCLI.
(4) run the command Vihostupdate - Server-I - b.
(5) the output of the command shows a success or a failure update.
You must enable OEM CIM providers on VMware ESXi 4 system after installing Dell OpenManage package to manage a system with Dell OpenManage Server Administrator.
With vSphere Client to allow CIM OEM suppliers:
To allow CIM OEM suppliers using VMware vSphere Client, you must have the vSphere Client tool installed. You can download and install the tool of http://where is the IP address of the VMware ESXi system 4
To activate OEM CIM providers on the vSphere Client VMware ESXi 4 system:
(1) log on to the VMware ESXi 4 system where vSphere Client is installed.
2) click on the Configuration tab.
(3) pursuant to the software section on the left side, click Advanced settings.
(4) in the Advanced Settings dialog box, click on 'UserVars' on the left pane.
(5) change the value of the field "CIMOEMProvidersEnabled" 1.
6) click OK.
(7) reboot your system for the change to take effect. Use the summary in vSphere Client tab to restart the system.
##################
So I downloaded the zip file.
Put the system into maintenance.
Attempt to update via vihostupdate.pl, which gives the error:
e:\oem-Dell-OpenManage-esxi_6.1-0000.zip unpacking...
Metadata.zip.SIG does not exist
signature mismatch: metadata.zip
Unable to decompress the package update.
I checked that the zip files are valid.
I'm patching of a windows 2003 System. I'm under esxi build 175625.
Ideas?
It seems that the cim hp patch has the same question:
Nice to hear that
-
Send a notification message (Email) every time the form is submitted
Hi all
Their is a new requirement in our application, send a notification message (email) whenever the form is sent (such as create or apply).
Please somebody guide me the steps to be taken.
Do we need to configure all the settings?
What are the things we need?
Thank you and best regards,
RobetHello
You must give all the parameters for APEX_MAIL. Procedure PUSH_QUEUE
http://docs.Oracle.com/CD/E14373_01/apirefs.32/e13369/apex_mail.htm#CHDJGGHGNote that these parameter values are provided for backward compatibility, but their respective values are ignored. The host name of the SMTP gateway and the SMTP gateway port number come exclusively from values listed on the manage environment settings when sending e-mail.
I posted link to the Administrator's guide in the proceedings where is instructions how to set up Email.
Kind regards
Jarihttp://dbswh.webhop.NET/dbswh/f?p=blog:Home:0
-
Dell OpenManage Server Administrator 6.0.3 and ESXi 4
I try to install Dell OpenManage Server Administrator version 6.0.3. I managed to install this sub ESXi 3.5 update 4. It says in the instructions activate OEM CIM providers by setting Misc.CimOemProvidersEnabled to 1. Misc.CimOemProvidersEnabled is supposed to be located under various advanced however, ESXi 4 is not. Anyone know where the moved the option or y at - it a new way to activate this feature with ESXi 4?
You do not install agents on ESXi directly, they will come in the injected code of VMware/Dell as a variant of ESXi. Indeed they are not installable on ESXi end-user. HP already has similar variant for ESXi 3.5. But to my knowledge, no hardware vendor has ESXi 4 variants yet out.
-
ESX 4 and IPMI / Dell OpenManage Server Administrator
Does anyone else use the Dell OpenManage Server Administrator software on their ESX host?
I do a cleaning/new ESX 4 installation on a Dell PowerEdge R900 server. I installed the OMSA without error, but when you try to start the service, you get a "driver ipmi departure: "message. " The web interface is running, but he tells no hardware information.
She acts as IPMI is not installed at all, but shows an RPM query:
VMware-ESX-drivers-IPMI-IPMI-msghandler-400.39.1vmw-1.0.4.164009
VMware-ESX-drivers-IPMI-IPMI-si-DRV-400.39.1vmw-1.0.4.164009
VMware-ESX-drivers-IPMI-IPMI-devintf-400.39.1vmw-1.0.4.164009srvadmin-ipmi - 5.5.0 - 364.DUP (appears after you run the install OMSA)
I tried to install using the srvadmin script OpenIPMI - openipmi.sh and get:
Status: OpenIPMI driver Module is not loaded in the kernel.
Recommended action: If OpenIPMI modules are available on the system.
Run "modprobe' command to add the kernel modules.I looked in ' / lib/modules/2.6.18-128.ESX/kernel/drivers/ ' for a modprobe IPMI driver, but can't find.
ANBODY have any ideas on where to go from here?
We have confirmed with Dell a few months previously, 6.0.3 required for ESX 4 classic, due out within 30 days of the release of GA of ESX 4 classic. So I'd wait for 6.0.3 unless it is already available. Dell said that they expected to be interrupted as soon as GA.
-
Installation of Dell OpenManage on ESX 3.5 update 3
According to this article:
There's a patch to install before installing Dell OpenManage. The document refers to ESX 3.5, and 3.5 update 3. So I wonder if I still need to apply this patch before installing Dell OpenManage. We will install OpenManage 5.5 on a PowerEdge 2950 III Server v.
Thank you
-John
You don't need this patch if you use update 3. (You should not this patch if you use the update 1 or later). VMware in general roles until all of the fixes in the next update.
You can also view this document, calling the patch only for 3.5. http://support.Dell.com/support/eDOCS/software/eslvmwre/Systems_Mngmnt/ESX_OM/HTML/OM.htm (table 2-1)
Bala
Dell Inc.
-
RE: Notifications by email for this forum
From what I see, I can opt either to receive notifications by email for each new post on this forum or I can choose to not not receive at all.
Is there a way I can set notifications by e-mail only to specific threads that interest me?
Open the position for which you wish to receive notifications by e-mail, and then click on "Receive email notifications in the right superior clear blue rectangle on the page." Work find a charm for me.
If this post answers your question or assistance, please mark it as such.
Greg Lafrance - Flex 2 and 3 certified ACE
www.ChikaraDev.com
Training Flex and Support Services
-
Receive notifications by email or RSS, both broken!
One of the reasons why I left this community last year was the break-up of the system. I was recently invited to a new beta products desktop program and I can't seem to activate the receiving email notifications on the entire forum, yes I want this traffic. Whenever I reboot the discussion forum the option is toggled back to not receive e-mail. So I thought I'd try the RSS FEED, but I am asked to authenticate by my reader of flow RSS (Netnewswire for OS X) and my community connection is not accepted, so I'm stuck. Yes, I type my login correctly.
I want to restore confidence in these forums, but I need a little help here. If you need to use Google Reader or any other reader platform-independent, just point me that way too.
Thanks in advance!
Participating VMware communities can now set watches on communities, discussions, documents and other items watchable without error.
The problem was the same cause as another question which fixed us only.
Best regards, Robert
Robert Dell'Immagine, Director of VMware communities
Maybe you are looking for
-
Satellite Pro L450D - 12 X - CPU upgrade
Hello I have a Toshiba Satellite Pro L450D - 12 X and I was wondering which processors 'Dual Core' support this laptop for a CPU upgrade? Have a read of other peoples threads, it is possible for the laptop to have an upgrade, but I'm not sure of what
-
How to do a lift on MW2 glitch?
OK so I tried to do glitches hacks etc for MW2 and ive something really evil with was lifts! Ive watched videos and everything but its im almost as cursed with not a curse of glitch freaken or something :/ in any case if you have a comment please let
-
How to change the destination folder on a computer for an Officejet Pro 8500 network scans.
The manual says to launch the HP Device Manager. There is no such program in the Application directory. The closest thing is a utility that is more easily accessible through system preferences. But there is nothing in the utility for adjusting the
-
under my Computor pandigital frame was listed and I could transfer pictures to my computor to the framework. Now, he's not gone. How I reinstall it?
-
When I try now, try to open a photo program that has worked for over 2 years, I get a message from Visual C++ Runtime Library "this application has requested execution to terminate in an unusual way. I installed the program (Roxio PhotoSuite 7 Plati