Dell OpenManage for R710

Similar Questions

• Problem installing OpenManage for VMWare vCenter integration

  Hello

  I'm trying to use Dell OpenManage integration with VMWare vCenter and have downloaded and deployed with the OVF file.  The virtual machine appears to have installed correctly and I recorded 2 servers by IP address vCenter.  I can connect to the DellAdminPortal page and sign in.  In the Administration Console under vCenter record I see two vCenter server and I get the message

  Success

  The vCenter 172.17.1.30 has been saved successfully. Open a new client vSphere for vCenter 172.17.1.30 so that the changes can be implemented.

  However when I connect to my with the Web Client vSphere vCenter I don't see the icon Dell OpenManage integration under the Administration category.  What Miss me?  I also checked the Administration-> have management and I can only see vCenter Orchestrator, Log Browser and SSO Admin UI Plugin.  About Dell OpenManage.

  I have connected several times and have even restarted the VM OpenManage, but nothing appears.  Any suggestions on what I can do to get this race?

  Thank you

  Scott

  Our web customer support is for vSphere 5.5 only. Please make sure it's the version of vCenter that you run.

  "If you are on 5.5 check if there are two plugin files in C:/ProgramData/VMware/vSphere Web Client/vc-packages/vsphere-client-serenity /" If there is, we have seen that removing the oldest file and restarting the blank Server fixed this issue.

• Dell OpenManage (64-bit) Version 8.3.0 systems management software

  Dell OpenManage Systems Management Software (64 - Bit) Version 8.3.0 will work on a server of PE2900 running Windows Server 2008 R2?

  Dell OpenManage Systems Management Software (64-Bit)

  Version 8.3.0

  Hello

  I'm afraid that OM 8.3 does not support PE2900.

  topics-CDN.Dell.com/.../Dell-OpenManage-Software-V8.3_support Matrix_FR - us.pdf

  Note: This forum is dedicated for OpenManage Essentials. In the future please post your query on OMSA on respective forum for quick/prompt response.

• IBM Director is similar to DELL OpenManage?

  Hello

  We use DELL and OpenManage Server for a few years.

  We will use IBM X 3650 server to run the new ESXi host.  We would like to know if IBM Director is something similar to DELL OpenManage?   Wouldn't be a free download? 

  In OpenManage, it is necessary to install the agent on ESXi host and use OpenManage on a physical server to access these agents on ESXi host.  Since we don't have server IBM, how these agents on IBM server are accessible?

  Your opinion is requested.

  Thank you

  IBM Director is free for the basic material followed (if the hardware is IBM).

  From what I remember that the server software is free and each piece of the IBM of hardwre that you buy - includes a license for the control of internal agent server IBM Director software.

  As said above for more sophisticated functions that there is an additional cost.

  Most of the management will be through the IMM (term of IBM for DRAC / ILO).

  You may be required to install some specific VIBs IBM or a custom of the ISO http://www-03.ibm.com/systems/x/os/vmware/esxi/

  Maish

  VMTN moderator | vExpert

  Author of VMware vSphere Design

  @maishsk | My Blog

• The Dell Openmanager on Esxi5 server administrator

  Guys,

  I'm having problems installing software from Dell (Dell OpenManage Server Administrator) in one of our servers that use a VMWare Esxi 5.0 operating system
  
  Dell OpenManage is a software management that allows a proactive monitoring, diagnostics, and notifications on the server hardware.

  I'm following the procedure indicated by the Dell documentation:
  http://media.community.Dell.com/en/DTC/attach/omsa6.5%20For%20esxi5_kb.PDF
  starting on page 13 (installation of Server Administrator for ESXi).

  In the manual, we have 2 ways to do this:

  1. using the vSphere CLI

  After it we have this result:

  C:\Program VMware vSphere CLI > esxcli - Server x.x.x.x vib software install/var/log/vmware/Dell_ d

  OpenManage_ESXi_OM650-offline_bundle - 467660.zip
  Enter the user name: root
  Enter password: *.
  Result of the installation
  Message: host is not changed.
  Restart required: false
  VIBs installed:
  VIBs deleted:
  VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000

  No changes were made.

  
  2 - using the VMware vSphere Management Assistant

  Again, we have the same result:

  Enter the user name: root
  Enter password: *.
  Result of the installation
  Message: host is not changed.
  Restart required: false
  VIBs installed:
  VIBs deleted:
  VIBs skipped: Dell_bootbank_OpenManage_6.5 - 0000

  Anyone has any idea on what could prevent installation VIB? Attached is the installation package.

  Hello

  Please check out the original VIb file and you'll get another VIB file inside by the name Dell_OpenManage_ESXi500_OM700-offline_bundle - 643291.zip.

  Using the vSphere CLI

  1 copy the Dell_OpenManage_ESXi500_OM700 - offline_bundle - 643291.zip
  file to the var/log/vmware/Dell_OpenManage_ESXi500_OM700-offline_bundle-643291.zip.

  2 close all comments on the ESXi host operating systems and run the ESXi
  host in maintenance mode.

  3. If you are using Windows, go to the directory where the vSphere CLI
  utilities is installed and run the above command
  to step 4.
  If you are using vSphere CLI on Linux, run the command in step 4 of
  any directory.

  4. run the following command:
  esxcli - Server
  install software vib d/var/log/vmware /.<>
  OpenManage file >

  5. type the username root and the password of the ESXi host when you are prompted.
  The output of the command shows a successful update.

  6. restart the ESXi host system.

  Use software esxcli software esxcli or get vib vib list to confirm the installation.

• Dell Openmanage 6.3.0 on ESX 4.1 error

  Hello

  I try to install Dell Openmanage 6.3.0 (OM-SrvAdmin-Dell-Web-LX-6.3.0-2075.ESX40.i386_A00.11.tar.gz) on my R900 server that has ESX 4.1 installed on it, but it fails with the following error:

  Error: Verify if Dell OpenManage media are corrupt.

  If you use the Web pack to install Dell OpenManage

  Make sure that you use the corresponding Web pack to the

  architecture and operating system on your system.

  Anyone got working on ESX 4.1 openmanage?

  Thank you

  Pieter

  This one is for ESX 4.0.  Try this one.

  http://FTP.Dell.com/SYSMAN/OM-SrvAdmin-Dell-Web-LX-6.3.0-2075.ESX41.i386_A00.12.tar.gz

• Dell Openmanage 6.1 reports SCSI errors in the console, what do mean?

  We have installed 2 new Dell servers with VMWare ESX 4 and also installed Dell Openmanage 6.1. So far so good, dell openmanage seems to work very well, we get not errors in starting services. But we get strange message (see screenshot) every two seconds the kernel in the console, including reffer a sort of sici device. Does anyone know what this message is about and how get rid of?

  Thank you.

  

  Looks like you are having the same problem I had with of my new race ESX 4 and Openmanage 6.1 R710. I found myself by opening a ticket with Dell and they came back and said that there was a problem with the inventory collector. Specifically, I think it has something to do with the FCAC as I recall the conversation.

  They do the following and it solved the problem. Oh and put the host in just in case maintenance mode.

  CD/opt/dell/srvadmin/cm/invcol

  MV invcol invcol.bak

  srvadmin - services.sh reboot

  At the time, Dell had a tentative date of update OpenManage to solve the problem.

  Ray

• Installing dell openmanage 6.1 on esxi 4.0 (released).

  I noticed that dell management is available for download:

  Dell OpenManage VIB for ESXi 4.0

  http://support.Dell.com/support/downloads/download.aspx?c=us & l = in & s = gen & releaseid = R227503 & SystemID = PWE_R905 & servicetag = & os = ESXi & osl = in & deviceid = 21859 & devlib = 0 & typecnt = 0 & vercnt = 1 & catid = 1 & impid =-1 & formatcnt = 1 & libid = 36 & 326356 = starts

  On the directions of installation, it lists:

  Customized for oem-dell-openmanage - esxi_6.1 - 0000.zip instructions:

  ##################

  1) download the appropriate package of RCLI (Remote Command Line Interface) of http://www.vmware.com/download/ If your system runs on Microsoft Windows or Linux.

  (2) copy the Dell OpenManage bundle into a directory on your system.

  (3) use the vihostupdate command. If you use Microsoft Windows, navigate to the folder where you installed the RCLI utilities to use this command. If you use Linux, this command is installed when you install the RPM RCLI.

  (4) run the command Vihostupdate - Server-I - b.

  (5) the output of the command shows a success or a failure update.

  You must enable OEM CIM providers on VMware ESXi 4 system after installing Dell OpenManage package to manage a system with Dell OpenManage Server Administrator.

  With vSphere Client to allow CIM OEM suppliers:

  To allow CIM OEM suppliers using VMware vSphere Client, you must have the vSphere Client tool installed. You can download and install the tool of http://where is the IP address of the VMware ESXi system 4

  To activate OEM CIM providers on the vSphere Client VMware ESXi 4 system:

  (1) log on to the VMware ESXi 4 system where vSphere Client is installed.

  2) click on the Configuration tab.

  (3) pursuant to the software section on the left side, click Advanced settings.

  (4) in the Advanced Settings dialog box, click on 'UserVars' on the left pane.

  (5) change the value of the field "CIMOEMProvidersEnabled" 1.

  6) click OK.

  (7) reboot your system for the change to take effect. Use the summary in vSphere Client tab to restart the system.

  ##################

  So I downloaded the zip file.

  Put the system into maintenance.

  Attempt to update via vihostupdate.pl, which gives the error:

  e:\oem-Dell-OpenManage-esxi_6.1-0000.zip unpacking...

  Metadata.zip.SIG does not exist

  signature mismatch: metadata.zip

  Unable to decompress the package update.

  I checked that the zip files are valid.

  I'm patching of a windows 2003 System. I'm under esxi build 175625.

  Ideas?

  It seems that the cim hp patch has the same question:

  http://communities.VMware.com/message/1307359#1307359

  Nice to hear that

• Dell OpenManage Server Administrator 6.0.3 and ESXi 4

  I try to install Dell OpenManage Server Administrator version 6.0.3. I managed to install this sub ESXi 3.5 update 4. It says in the instructions activate OEM CIM providers by setting Misc.CimOemProvidersEnabled to 1. Misc.CimOemProvidersEnabled is supposed to be located under various advanced however, ESXi 4 is not. Anyone know where the moved the option or y at - it a new way to activate this feature with ESXi 4?

  You do not install agents on ESXi directly, they will come in the injected code of VMware/Dell as a variant of ESXi.  Indeed they are not installable on ESXi end-user.  HP already has similar variant for ESXi 3.5.  But to my knowledge, no hardware vendor has ESXi 4 variants yet out.

• ESX 4 and IPMI / Dell OpenManage Server Administrator

  Does anyone else use the Dell OpenManage Server Administrator software on their ESX host?

  I do a cleaning/new ESX 4 installation on a Dell PowerEdge R900 server.  I installed the OMSA without error, but when you try to start the service, you get a "driver ipmi departure: "message. "  The web interface is running, but he tells no hardware information.

  She acts as IPMI is not installed at all, but shows an RPM query:

  VMware-ESX-drivers-IPMI-IPMI-msghandler-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-si-DRV-400.39.1vmw-1.0.4.164009
  VMware-ESX-drivers-IPMI-IPMI-devintf-400.39.1vmw-1.0.4.164009

  srvadmin-ipmi - 5.5.0 - 364.DUP (appears after you run the install OMSA)

  I tried to install using the srvadmin script OpenIPMI - openipmi.sh and get:

  Status: OpenIPMI driver Module is not loaded in the kernel.
  Recommended action: If OpenIPMI modules are available on the system.
  Run "modprobe' command to add the kernel modules.

  I looked in ' / lib/modules/2.6.18-128.ESX/kernel/drivers/ ' for a modprobe IPMI driver, but can't find.

  ANBODY have any ideas on where to go from here?

  We have confirmed with Dell a few months previously, 6.0.3 required for ESX 4 classic, due out within 30 days of the release of GA of ESX 4 classic.  So I'd wait for 6.0.3 unless it is already available.  Dell said that they expected to be interrupted as soon as GA.

• Installation of Dell OpenManage on ESX 3.5 update 3

  According to this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003459

  There's a patch to install before installing Dell OpenManage.  The document refers to ESX 3.5, and 3.5 update 3.  So I wonder if I still need to apply this patch before installing Dell OpenManage.  We will install OpenManage 5.5 on a PowerEdge 2950 III Server v.

  Thank you

  -John

  You don't need this patch if you use update 3. (You should not this patch if you use the update 1 or later). VMware in general roles until all of the fixes in the next update.

  You can also view this document, calling the patch only for 3.5. http://support.Dell.com/support/eDOCS/software/eslvmwre/Systems_Mngmnt/ESX_OM/HTML/OM.htm (table 2-1)

  Bala

  Dell Inc.

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• How can I restore crlt-alt-del? for my master?

  How can I restore crlt-alt-del? for my master?

  Why Ctrl + Alt + Delete does not open the Task Manager in Windows XP
  http://www.watchingthenet.com/why-ctrlaltdel-does-not-open-Task-Manager-in-Windows-XP.html

  You can also get to the Task Manager by right clicking on the taskbar.

• Printer Laser Dell c1760nw for Linux/Ubuntu drivers

  Hello

  I bought the Dell C1760nw for my home network.

  I need to print to it via Ubuntu 10.04.

  So far, I was unable to locate the linux drivers. I am ready to develop linux drivers if I can get hold of the relevant specifications.

  Any help much appreciated.

  Door wood

  Take a look at this link: http://codefucius.blogspot.co.uk/2014/03/getting-dell-c1760nw-color-printer-up.html

• Dell OpenManage, ESXi 5.1 &amp; reconstruction of bays RAID online

  I am owner of a Dell PowerEdge T420 with ESXi 5.1 installed and I was wondering if it is possible to rebuild a RAID array without having to restart the server.

  I was under the assumption that the use of Dell OpenManage running on Windows Server together with the Dell OMSA VIB would allow management of virtual disks when the system is online.

  I am able to see the State of health of the RAID via OpenManage arrays, but can't seem to perform management of tables.

  I was mistaken in that assumption?

  Jmartincic,

  You can simply reinstall the failed drive to start a regeneration. In the OMSA with ESXi graphical user interface, it's only a tool of surveillance. You cannot trigger something from him, although only with regard to the controller.