November updates of issues

Similar Questions

• November update

  Since mid-November update I was not able to enter anything in Word or Excel if the internet is running.  The Microsoft community points out that it is a problem many are seen and may have something to do with the KB3097877 update.  I uninstalled the update, but this has not fixed the problem.  Are there patches?

  WHT

  Have you tried to uninstall and reinstall Microsoft Office to see if it will fix the problem?

• Update causing issues/gel commissioning

  Bought a new computer with Windows 7 Ultimate edition.  Once the computer has been hooked, it calls for several (at least 57) updates.  A lot of updates failed.  After their small batch update, the computer is up to date and no other updates were needed (as of 01/03/11).  Now that updates are made the computer hangs during startup upward at the black screen "starting Windows."  It is bad to restore only that the retroactive system to 'plug-in' original 12/26 date will allow him to launch correctly so it updates.  Nobody knows who these updates 57 or so bad?  At this point, I'm ready to return the new computer and get something that does not use Windows because it's very frustrating.

  Hi nancevil,

  First of all, I would say that you perform the clean boot procedure to verify if a third-party program installed on the computer is causing the problem after installing the updates.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then you will need to install the updates in two numbers to see what update is causing the issue and also temporary disable the security software on the computer during the installation of updates.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update KB977839 646 error message. Don't download, update just issued today.

  Windows KB977839 update download error 646?

  I have the same problem today, manual istall fails with error 646. This is the first time I got error 646 on this Vista machine family premium, because I got it 1 year ago, all facilities have worn their fruites.
  Kevin

  Hey Kchusa,

  I'm curious to know the details of this problem.
  You can help us get a few more details (install log files).  Here's how:

  Open the Registry Editor:
  1. Click Start, type regedit
  2. press enter

  With the Registry Editor:
  3 Navitage of HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
  4. right click in the right pane and create the following registry key:
  Reg_SZ: Logging
  Value: voicewarmupx
  

  
  5. when logging is enabled with the above step, run the installation again to reproduce the error.
  6. click on start, type %temp%, and then press ENTER.  This should open the temp folder.
  7. in the temp folder, locate but a new log file that begins with the letters "Msi" and end with a .log extension.

  Once you have collected the log file, you can send it to * address email is removed from the privacy *.
  When you compose e-mail, remember to include the word ANSWERS in the subject line.  In the body of the e-mail, please include your answers show the nameand the link to this topic.

  Thanks for the help,

  Important:  Please note this isn't a support email address, and send this information does not guarantee that Microsoft will contact you for follow up to the top.  By sending this address you give permission for Microsoft to contact you if it is established that there is a need for further communication related to this issue.

• does not Aspire switch 10 windows 10 November update no sound

  Hello. IM new. I have a aspire switch 10. completed the update of windows November 10.

  No sound since then. not even HDMI.

  have the codec realtek audio with intel wdm ESS.

  contacted ms support advised that I need a driver for realtek uptodate.

  If anyone has experienced this? I tried all the steps obvious when things doesn't work for example update driver, uninstall / re installation, configuration, etc. etc. Support of ms also tried many things including catering.

  any help would be appreciated.

  JAV

  OK, we're going to update a few things:

  BIOS:

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.18_A_A.zip?acerid=635811629128805837&S...

  Pilots of the platform:

  http://global-download.Acer.com/GDFiles/driver/platform%20Drivers/platform%20Drivers_Intel_1.0.0.106...

  Realtek:

  http://global-download.Acer.com/GDFiles/driver/audio/Audio_Realtek_6.4.10041.4257_W10x86_A.zip?Aceri...

  Once this is done, please check if you seem to work.

• Updates to issues not passing is not by

  I downloaded the latest issue of our magazine published last week and subsequently made a few changes to these files. I've updated the files in InDesign, pushed an update through the end rear of the DPS and while I don't have any problem just do these things, we do not get a "update available" notice on iPads where we bought the question. It is really important that these updates are going through, and I had not before worries. FYI, we lack 25 Viewer version if it helps everything.

  Any ideas on that?

  Yes, I've confirmed with team Viewer DPS that the publication and republication of a folio cancellation causes this problem. Anyone who has already downloaded the folio is unable to receive updates for this folio until they uninstall and reinstall the application. The problem is that the viewer effectively treats the 'old' version of the folio as an interpretation, and it sticks to this restitution without seeking restitution (republished) more 'recent '.

  Unfortunately, once you enter this State, there is no good solution at this time. One solution is to not publish or remove the folio and then create a new folio, but then users could end up with two versions of the same folio in their library, more there may be problems of law.

  Let me ask around see if we can provide a better workaround solution (or better yet, a bug fix).

• iTunes sync after updating iOS issue new 10

  Once the new iOS updated 10-day, I connected my iPhone 6 with iTunes (v11.4) on my Mac (OS X 10.6.8) to synchronize. I have not had any problems before the update. After the new iOS updated, I connected because I want to sync new music to my library, but I got this alert saying ""iTunes could not connect to the iPhone because an invalid response was received from the device. " " I tried to restart my computer and peripheral and also tried

  USB cable to synchronize with another, but nothing has worked. I said the new update of iOS has something to do with it, everyone with this problem?

  iOS9 or newer on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  If you have installed iOS10 very probably you run iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• After latest ios update, facing issues with connecting to my account.

  After update to ios9.3.4, I am unable to access my account of library like Safari just brings me to the home page repeatedly without allowing me to identify you. Same question is there with my other account of connection such as Wal-Mart. Someone knows a solution for this?

  Try to restart, hold down the sleep and home buttons until you see the Apple logo. If this does not help, there may be a problem with your certificates, as they are required for https connections.

• Satellite M30 742: update BIOS issue

  Hello

  I have a Toshiba Satellite M30-742.

  The BIOS does not recognise my new NEC optiarc DVD RW AD - unit 5540 a. so I need to do a BIOS upgrade.

  Can someone tell me where can I get BIOS more recent (I currently v1.40) and how the procedure is done?

  Thank you in advance.

  Concerning

  Maybe you don't need to update n the BIOS but a CD/DVD player compatible and taken in charge? ;)

  Not all CD/DVD slimline drives are compatible with laptops due to different master/slave/c-salt settings.

  I is recommended; buy a compatible player and don t flash BIOS because this willnot help!

  A hint more; If you try to update the BIOS with the bad BISO or bad procedure the laptop motherboard could be too bad!

  So be careful dude!

• Satellite U400 - update BIOS issue

  Hello
  I thought that I've updated the BIOS, but when I downloaded the file tohsiba and installed maybe I did installed it wrong I should change in the settings or something because the version of the BIOS is good it displays the latest version: TOSHIBA V4.80
  But on the SMBIOS version it shows the oldest a ver 2.5, please someone can tell me or show me how to upgrade that to?

  Here's a picture of you guys show what I mean:

  [http://img24.imageshack.us/img24/8007/screenshot001mc.jpg]

  and because in this version of the bios so there manny settings if I click on: Advanced settings: FLAGS, DMI and DEVICES but on DMI and I see 'Category' and there motherboard, system, chassis, OEM parameters and others, may be I should click then it will change in the new version even in not only the BIOS and SMBIOS or?

  Thank you

  Hello

  What version is broadcast in the BIOS settings?
  Go to BIOS and check this!

  Usually, we should see version 4.8
  If your update of the BIOS has been updated correctly, you will see the v4.8 in BIOS settings.

• 2180 satellite CDT: update BIOS issue

  I have an old Satellite 2180 CDT and a message saying "ready for the update of the BIOS. Please insert a disc of the BIOS update... "appears when I turn on the computer.

  I downloaded the update to the correct BIOS to floppy and follow the instructions of Toshiba.
  When I insert the disk and press a key.
  the disk starts for a second, but stops and starts again. It continues, and at the same time, the laptop emits a short beep every time the hard drive begins.
  Light flashing for the floppy green.

  I'll be very grateful for any help. I don't often use the computer, but it has some important information on this subject...).

  Hello

  Can you please tell what wrong because I s t see any problems.
  The fact is that you can hear a beeping sound during the BIOS update procedure.
  Did you get the error messages or something like that?

  Maybe this document of the BIOS update will help you:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000000b07

• Equium A200-1VO: update Bios issue

  Someone at - it updated the Bios here with the latest offer.
  I wanted to do because the port for express adapter card seems to not work properly.

  But all I get is an error message - 120 of Winphlash saying the Bios is incorrect, but I downloaded it twice and double checked each stage.

  Equium A200-1V0 seems to belong to the series of PSAF5.
  Have you downloaded the BIOS for this series?

  In addition, you can check the label at the bottom of the unit. You should see the serial number too.

  By the way; I put t think that the BIOS update will solve the problem of port adapter express card.
  I put t know exactly what the problem is, but if you use the compatible and fully support the express cards then everything should function.

  Best regards

• Windows 10 November update stops at 32% saying that Intel 5100 Iris was not compatible with windows 10

  I use a Mac Mini 2014, El Capitan, Windows 10 Pro with Bootcamp

  I'm trying to update my existing windows 10 in 1511 10586. 32% the system constantly to say that installing Windows 10 his is not possible, as the Intel 5100 Graphics Iris is not compatible with Windows 10. On the other hand I'm already on Windows 10 with Iris 5100 with no problems. No idea how t resolve that? I did find something similar in any other forum...

  Thanks for your help!

  Windows 10 1511 pushes a WHQL driver on the 5100. Before you start the upgrade, please disconnect the Internet Mini/Windows and then try again. You can also disable the automatic updates of Windows.

• Another chart update rate issue (using a state machine)

  Hi all!

  I'm develiping a pilot for a new instrument.  I have the basics of work based on the vi tree tutorial.  Now, I'm creating a basic example.  I started by watching a tutorial of State machine (a soda dispenser).  I have 3 States, basically init/reading data/check buttons & writing. Everything works great, reading and display of data. I would now like to add a chart for one of the data (SAP in this case).  Try to implement the method using the loop counter.  Loop cycles at 100 ms for now updating in 5 seconds (later must be user input).

  So basically, I have a simple state machine that updates the values on the screen in a certain State.  I need these data at the top level for trace or possibly turning most of these (less graphic) in a self-contained vi.

  Anyway, I have a Boolean LED in the main loop that flashes every 5 seconds. So far so good.  Except that the graph updates apparently at random?  Put the prog in sleep mode and I have seen the updated table when the data has been read (inside the red box). He has every time.  I'm just creating a local variable inside the red zone...  I see sporadic updates in the charts, maybe 5-10 updates every 5 seconds.  What Miss me?  If I change the iterations of the loop to a faster number (e.g. 10 ms) graph updates like crazy (although the CASE is false).

  

  Hi Steven8R,

  The chart will update any update a fact local variable refers to the table.  If the chart should be updated each time the code in red box runs.

  The code you have in the structure of the business is not doing anything.  It's just whatever data, the graph contains the reading and writing in itself.

  Something you might try to do instead is wiring the output of the amp VI get directly to the table AMPS inside the 5 second delay of the case structure.  This will update the chart as the most recent data point every 5 seconds.  Is that what you want?

  Best,

• Update installation issues

  When you try to install Windows updates, it takes a terribly long time; and then I get the message 'Installation failure, recovery of changes' which lasts even longer. How can I stop this?

  First of all, I had the computer installed to automatic updates. He became a non-fin cycle of installation attempts failed and restoration of the changes. Go to manual installation seems to work any better.

  We assume you are using Windows 7?

  If so, open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If you get errors related to updates?

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5 follow the links in the dialog box of Windows Update under more information or help and Support to try to resolve the problem, then try to reinstall the update by using Windows Update in Control Panel, or post back with more information.

  I have

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.