npctrl.dll add on

Similar Questions

• could not load npctrl.dll

  I am trying to display the Mesa County GIS Chrome usng

  http://Emap.mesacounty.us/slmap/default.aspx?MapType=PRECINCTDISTRICTS&extent=665562.0:4259914.0:815158.0:4365545.0 
  I had to ok a couple of weeks, but now I'm getting

  could not load the plug-in Silverlight plugin.
  I tried uninstalling and resinstalling silverlight, but this only leads to a different error message
  could not load c:\Program Files\Microsoft Silverlight\5.1.10411.0\npctrl.dll.

  Hello

  1. do it normally works using Internet Explorer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• When opening outlook, I get the following an uninstalled version Mcafee - error message the C/programfiles/Network Associates/VIruscan/scanmail.dll add-in could not be installed or loaded

  Supplement C/programfiles/Network Associates/VIruscan/scanmail.dll cannot be installed or loaded

  According to the version of outlook on how to review your supplements / comms and uncheck the offending one.

  Also check the McAfee website for any utility 'delete all '.

• Programmable choose DLL ActiveX Matlab

  Hello

  We use Labview with Matlab ActiveX DLL. Everything works very well. But everyone recompile us the DLL Matlab, I need to re connect the static reference to the new DLL Matlab. It is possible to get the dynamic link?

  So, if recompile us the dll (keeping the same input, output, functionName version), I do not need to re connect my reference only:

  (1) regsvr32 u test.dll,

  (2) replaces the C:\Y_Code\test.dll by the new

  (3) regsvr32 test.dll

  

  I understand not the Basic VI, 3 different Matlab DLL (maybe rename it).
  Test_1_0_1.dll = add m + n + 1.1

  Test_1_0_2.dll = add m + n + 2.2

  Test_1_0_3.dll = add m + n + 3.3

  Of course, you will need the MCR7.10 of Matlab Runtime (if needed, I can send you the runtime, but 152Meg...)

  Thank you

  smercurio_fc wrote:

  Your question is not specific to Matlab, as it applies to any ActiveX. He has also been asked before. What you ask is not possible in LabVIEW.  You must create a form any wrapper DLL that will actually interface with the ActiveX component.

  Thank you

  How can I do an wrapper? I'm not really understant what is a wrapper

  Thank you

• Silverlight Plugin missing

  I want to watch Netflix and refuses to use an other Brwoser than Firefox. So here's the problem:
  After correctly uninstall silverlight and put it back, once again, Netflix continues to give me notice that silverlight must be installed, although it is. I uninstalled Firefox clean and installed again. I went into the internet up and down and did everything, like the microsoft tool, I checked if everything is up to date, I've done everything literally! When I keep the navigation for the solution, I see that on some sites, he advised me to check my addons-> Plugins and select silverlight. Now, I remember seeing Silverlight it there many times, but is not there any more, it is completely absent. Please help me!

  If the above does not help...

  Firefox usually detects Silverlight since a registry entry created by the Silverlight installer. Points of entry into a file here - you can verify that the file exists:

  c:\Program Files (x 86) \Microsoft Silverlight\5.1.40728.0\npctrl.dll

  If the file does not exist, the installation failed.

  If there is in this place, there's a number that Firefox cannot find it the possible reasons:

  One of the possible reasons for a plugin not installed in which they appear in the page modules are if Firefox has DO NOT scan the registry for plugins. Another is that the settings of Firefox, plugin data storage file is corrupt. Here are the steps to check these possibilities:

  Confirm that Firefox scans the registry for plugins

  Firefox detects the Silverlight plugin for a registry entry. Some users have scanning disabled for some reason any. Here's how check and fix this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the scan and make a pause so that the list is filtered

  (3) If plugin.scan.plid.all is not set to its default value true, double-click it to activate it by default.

  If you have changed this setting, close and restart Firefox to start another analysis.

  If you visit the Add-ons page again, success?

  If Firefox is set to scan, but still do not find Silverlight and the list on the page Add - ons...

  Remove the registry file for the plugin for Firefox

  Sometimes the pluginreg.dat file is damaged. You can remove it and Firefox plugins re-scan. As a side effect, the plug-ins that you have disabled the page modules probably will be reactivated, you'll need to return to this page once more.

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table of the page, click on the "view file" button to launch a new window of Windows Explorer showing your settings files.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • File menu > exit

  Pause while Firefox finishing its cleanup, then rename pluginreg.dat to something like pluginreg.old

  Launch Firefox back up again. (If you want to restore your previous session non-private use history > restore previous Session.)

  When you return to the page modules, is Silverlight finally here?

• YouTube only choppy when loading Web pages in new tabs

  When I play youtube, it will become unstable when I try to open another Web page in a new tab. I tried to disable hardware acceleration in firefox, flash and on my graphics.

  Is there a way to fix this?

  Thank you.

  Hello

  None of the above worked even though I have them.

  I went to an earlier Flash and performed version the following worked:

  Add 4 additional items to about: config.

  Do a right click in the white area and in the small box go again-> then click on the Boolean to make each of them below.

  dom.ipc.plugins.enabled.npctrl.dll
  dom.ipc.plugins.enabled.npqtplugin.dll
  dom.ipc.plugins.enabled.npswf32.dll
  dom.ipc.plugins.enabled.nptest.dll
  

  You can copy and spent in each of them instead of typing. Make sure that they are all false there are one of most all if need be to be false.

  DOM. IPC.plugins.Enabled <-this need for all the of false. It should all be ready in there so double click it. First then add them under another option is necessary.

  Click Start > Control Panel > system properties > advanced > Environment Variables > System Variables > / nine

  Then add these.you can copy and past them
  Variable name: MOZ_DISABLE_OOP_PLUGINS
  Variable value: 1
  (These steps are from another site).

• Firefox knows several accidents since installation of Webroot AV package need any info on the crash can get to try to isolate and resolve this

  Accidents that occurred at several sites and even occurred when you connect on the browser on 3 or 4 occasions. More frequently so involved in the loading or reloading flash games. Disabled various functions in the AV, cannot be isolated from anything. Here as much information as possible about what is causing crashes then may be disclosed to the webroot for possible resolution
  Any help greatly appreciated
  Here are the last 5 IDs, have a large list, several have been submitted
  with comments about this issue

  Solution:
  Test continued the 20
  As indicated in previous entry
  crashes with all the below to note the values of Configuration FF the value 'True '.

  DOM. IPC.plugins.Enabled
  DOM. IPC.plugins.Enabled.npctrl.dll (microsoft Silverlight)
  DOM. IPC.plugins.Enabled.npqtplugin.dll (Apple Quicktime)
  DOM. IPC.plugins.Enabled.npswf32.dll (Adobe Flash)
  DOM. IPC.plugins.Enabled.nptest.dll (NPAPI Test Plugin)
  DOM. IPC.plugins.java.Enabled (Java)

  With these is set to false and WSA on, Firefox crashes occurred randomly in various
  situations in surf and play.
  Crash with WSA not disabled.

  The value of these values are all true, then no crashes the browser.

  Breakdowns:
  All the fake worms, checked once again, WSA, Firefox crashed, with WSA
  offshore, no crashes

  Started with Java and worked at bottom upwards by turning each and stable
  with WSA rekindled.
  Crashes stopped occurring when the plugin Quick time has been set to true.

  'Cultivable fix to this problem, the user: the configuration above to all true values
  
  (Best bet to be a problem that does not occur, with quite true I rebooted)
  during the game play hundreds of times without accident)"
  

  Looks like there is some kind of conflict between plugin Quick time and the
  WSA, which should be resolved by Webroot if possible.

• What are the preferences of ff-related plugin - container.exe in its new version of ff? Specifically, I would like to change them all: config to disable plugin - container.exe

  I did it with a previous version of ff by changing the values of these preferences: dom.ipc.plugins.enabled to true

  DOM. Fake IPC.plugins.Enabled.npctrl.dll

  DOM. Fake IPC.plugins.Enabled.npqtplugin.dll

  DOM. Fake IPC.plugins.Enabled.npswf32.dll

  DOM. True IPC.plugins.Enabled.nptest.dll

  dom.ipc.plugins.timeoutSecs 45

  After I installed ff on my laptop today I can not find the .dll preferences. And plugin - container.exe continues to torment me. For me, that's the only problem with ff since the 7 update. It boggles me as to why you have not managed to get rid of this thing.

  To disable the crash protection, go to about: config and all preferences from dom.ipc.plugins.enabled set to false. (It is possible that your browser has only this entry preferably without any additions.) This will prevent the process of "plugin-container" of race and all plugins will run within the process of Firefox. (from Disabling_crash_protection )

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Reason 1.0.1.2.5 plugin is installed on my PC. When I Googled, there is concern that it is a keystroker or other malicious software. Can you confirm this?

  Please let me know if the pattern Plugin is safe or not. In addition, what is it for?

  See the following topics:

  • http://forums.Adobe.com/thread/721103?TSTART=0 (scroll down and you will see under the heading "Silverlight")
  • http://www.ThreatExpert.com/files/npctrl.dll.html (reference the .dll file and shows the path to the file)
  • http://www.xraymypc.com/process/N/npMotive.dll.htm (describes the file and who created it)
  • http://www.motive.com/ (Alcatel-Lucent)
  • http://www.prevx.com/filenames/95476579133440138-X1/NPMOTIVE.dll.html (the version of virus)

  Hope that this clears up any misunderstanding.

  If you still have doubts, download the file on this site: http://virusscan.jotti.org/en

• This operation is only valid in the context of a container of app?

  Hey guys,.

  I try to practice loading DLLs in LabVIEW and I wanted to start from scratch.

  I created a simple dll add with Visual Studio C++ from 2013, but when I try to load of LabVIEW, I get this error

  

  I did some research and it seems that the dll is built with a target that is intended for Windows App Store and not normal dll.

  There was not much information available on google. Anyone know anything on this subject?

  Hi Doradorachan,

  What I found on the web, this erorr is a fairly large error on Windows. You found these resources to use the DLLs and LabVIEW?

  Generating a DLL with Visual C++:

  http://www.NI.com/white-paper/3056/en/

  How to call a dynamic library (DLL) of LabVIEW? :

  http://digital.NI.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33

• Merging 2 PDFs causes WINWORD. EXE fails

  When merging 2 PDFs together, it will work 1 / 3 times. It seems to use WINWORD. EXE to merge the two files with the help of the PDFMarkerAPI.dll Add. The latest version of Acrobat that we use is 11.0.10.32

  Event Viewer reports the following application error when the error occurs;

  The failing application name: WINWORD. EXE, version: 15.0.4420.1017, time stamp: 0x5067349a

  The failed module name: igd10umd32.dll, version: 8.15.10.2291, time stamp: 0x4d41a0db

  Exception code: 0xc0000005

  Offset: 0x000e3331

  Failing the process ID: 0x2e8

  Start time of application vulnerabilities: 0x01d0442afe8a99a4

  The failing application path: C:\Program Files (x 86) \Microsoft Office\Office15\WINWORD. EXE

  Path of the failing module: C:\Windows\system32\igd10umd32.dll

  Report ID: 3cc03c4e-b01e-11e4-819e-d4bed9e463e6

  I updated Adobe Acrobat version and did a repair on the entire suite Microsoft Office 2013.

  It turned out to be the graphics driver. Updated and the problem disappeared. Who would have thought?

• Add external Python DLL to the project setup

  Hi all

  I have a Setup program, but can't seem to add a python DLL. There's that VI s that use the DLL, but for some reason, the project does not add the python DLL. I tried to do the project > add to the project, but that allow you to add files randomly, just of Labview files. Not sure why it is so restrictive.

  Any help would be appreciated.

  Thank you

  I thought about it. If you go to work in the project that lists, right-click the add menu has more options. Cordially for someone else.

• wldlog.dll missing in messenger - cant cause of uninstall program is not listed in my Add/Remove programs

  When I try to open MSN messenger I get an error message saying wldlog.dll is missing - it was suggested uninstalling and reinstalling messenger however the program does not appear in my Add/Remove programs in the control panel - it appears in my area of program under start - programs - what can I do

  Hello

  ·         What operating system do you use?

  ·         Are what Messenger you referring?

  ·         You try to install the Messenger and check if the problem persists?

  ·         Were there recent changes made on the computer before the show?

  Please provide more information on the issue so that we can better help you.

  If the problem is related to Windows Live Messenger, you can post the question on the link provided below for assistance.

   

  Portal Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

• Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

  When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

  Hi MickRl,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• "what is' oleprn.dll" files to add ons

  I find several "ole.dll"files in add ons to run without permision in windows 7" What are these for?

  When you are in ' manage the add-on ", click on the entry and look towards the bottom of the page and"click on more information " or search this 'The module via the default search provider'.