NPIV enabled on the virtual machine, but not seen in the comments

Similar Questions

• SRM failover for virtual machines but not all VMDK disks to include

  Hi, I have a number of VMs that need failover protection, but not all the VMDK disks must be included when switching to the opposite site. For example, a virtual machine can have 3 discs and players only need 1 & 2, switch to the recovery site - SRM can be configured to ignore the 3rd disc?

  Thank you

  I was not aware of a fact that replied vmdk cannot be detached. I think that this is normal.

  Why you are replicating data, you do not need? You can place these VMDK on LUN not replicated?

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• VI Client shows 95% starting a virtual machine but the virtual machine is already up

  VI Client shows 95% starting a virtual machine but the virtual machine is already running and so for a few days. E customer VI is not refreshing or the management console should be cycled/restarted?

  ESXi, correct?

  See this link

  http://www.VM-help.com/ESX/esx3i/ESXi_restart_agents.php

• Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.

  When BindByName undefined, it works as expected.

  I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.

  I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.

  Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.

  Please see the example below.

  ---

  Environment (default):

  Windows 7 Professional 64-bit SP1

  Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT

  .NET framework 4.5.51209

  Local system: EN - UK (but also does not, EN-US).

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Environment (base):

  Windows 7 Professional 64-bit SP1

  Updated Visual Studio 12.0.31101.00 //SEE above 4

  .NET framework 4.5.51209

  Local system: EN - UK

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Call stack:

  	mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal)
  	mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown)

  > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)

  Example:

  ----

  using System;

  using System.Collections.Generic;

  using System.Linq;

  using System.Text;

  using Oracle.ManagedDataAccess.Client;

  using Oracle.ManagedDataAccess.Types;

  using System.Data;

  namespace NoddyConsole

  {

  public class Program

  {

  public static int Main (string [] args)

  {

  Error int = 0;

  Errors += Command_ExecuteReader_BindByName_Fails();

  Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();

  return errors;

  }

  public static int Command_ExecuteReader_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  cmd.CommandType = CommandType.Text;

  BindByName. cmd = true;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  /* *-/

  OracleRefCursor orc = null;

  cmd ExecuteNonQuery()); must fail here

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  /* */

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  BindByName. cmd = true; // ####

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader();

  OracleRefCursor orc = null;

  HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  cmd ExecuteNonQuery());

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  ORC. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  }

  }

  ---

  create or replace package THAT SHAUN is

  type ref_cur_type is ref cursor;

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type;

  end SHAUN;

  /

  create or replace package body what SHAUN

  -TTS000233

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type is ref_cur ref_cur_type;

  Start

  Open the ref_cur for

  Select UO.object_name from user_objects UO;

  Return ref_cur;

  end recreate_issue_1;

  end SHAUN;

  /

  ---

  Thanks a lot to qualify again for me Alex.  I'll try upgrading to the latest version of the provider.

  The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.

  Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.

• Virtual machine does not start the Server Windows 2003 Std ISO file?

  Hello

  I am trying to create a virtual Windows 2003 machine, I created the ISO file, downloaded on my ISO library and connected the CDROM drive for the ISO file.

  When I boot the maching, I select the start menu and select the CDROM drive the virtual machine starts the ISO?

  The continuous boot just on the network card boot.

  It's as if the virtual machine does not see the CDROM drive?

  I use folder2iso

  To me, it sounds as if the ISO created may not be bootable! How did you create the ISO file?

  André

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• VSphere 5.1: Virtual Machine does not share host RAM

  Hello

  I use a 5.1 Vsphere license (Vsphere 4 update)

  I am facing a problem after the upgrade, virtual machines do not RAM

  As if I have two machine with 2 GB of RAM in total then use of the RAM on the HOST becomes 4 GB but really active memory usage is about 1 GB only.

  It wasn't a problem in Vsphere 4 it shows an active memory as the HOST memory usage but in Vsphere 5 Virtual machine share not RAM and book full RAM when turned on.

  Maybe there's some settings to enable sharing of memory or to disable this full booking of RAM.

  Hello

  The changes are the VMkernel is using large pages to back up virtual memory pages.

  For more information, this article by Duncan will provide enough information and links to other articles on this topic:

  http://www.yellow-bricks.com/2011/01/26/re-large-pages-gabvirtualworld-frankdenneman-forbesguthrie/

  In short VMkernel will place pages issued by the VM in large pages on the physical memory to speed up the memory access. Large pages are used when the physical CPU that has functions EPT (Intel) or IVR (AMD).

• Virtual machine does not start

  Hello, I had a VM VirtualBox but VB don't sharing not the graphics so I was told to use the workstation. I tried from news on workstation Virtual Machines, but also to transfer to the other virtual machine, but it sits right on the screen for hours. I have a pretty crappy laptop so I understand the Virtual Machines may not work correctly, but this would make won't start do not at all?

  

  When I try to get out, it gives me this error message.

  Please try * .vm (including the asterisks).

  André

• How this problem fixed?  Virtual machine could not be loaded: it could be missing, corrupted, or inaccessible

  Can anyone help. ?  whenever I run the .vmx file. the following message appears.

  "Virtual Machine could not be loaded: it could be missing, corrupted, or inaccessible" it was working fine... its vmx of windows 2003 server. all of sudden this message began to appear. There were a few changes to group policy by the admins of LAN.  What is the reason. I always run this through administrator. the password also changed as a result of the Group Policy update... pls tell me its urgent to run .i have re-change the password of admin to the older one, but for the same msg again again...

  some details are

  Welcome the OS is Windows XP

  Player version == VMware-player - 1.0.3 - 34682

  Guest operating system you want to load?  Is Windows 2003

  The guest was able to run successfully before == YES

  I've attached the VMX file also.

  Please it damn importatnt and urgent... .all my quote UAT is there... and no where else...

  The output of vmware.log using perl vmxRecover.pl etungscript is attached.

  I quickly looked on it and looks like it should work for me :)

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• Find my iPhone - appear on my machine, but not get my iPhone

  Find my iPhone - appear on my machine, but not get my iPhone

  Welcome to the Apple community.

  There is no 'Get my iPhone', not sure what you're talking about.

• Virtual machine does not respond on esxi 5.0 using Vsphere 5 customer

  Hello

  One of my virtual machine does not respond when I am trying to connect through the console on my vsphere client. I use esxi 5.0.

  The thing is that I have several virtual machine works very well and I do not understand why it doesn't work anymore.

  When I try to restart the vSphere client, nothing happen or when I try to stop it.

  Does anyone have an idea of what I need to do?

  Welcome to this community!

  in some special cases the virtual machines enter State does not. In this case, we have to kill the VM process to bring the virtual machine online.

  the following KB explains different methods to do the same thing.

  http://KB.VMware.com/kb/1014165

  Follow the steps under "using the ESXi 5.0 esxcli command to turn off a virtual machine.

  I would recommend contact VMware support, given that the steps above are a little off destructive.

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.