NSLU2 - no ip address, no connection possible

Similar Questions

• The Tecra S3 M780 / Intel 2200bg / Win XP SP2 without WPA connection possible

  I tried for months now to get my laptop to connect to a network secured with WPA - PSK wireless. I couldn't make it work at home, but I blamed the router. There is no problem connecting without warranty from WEP.

  At work there is now a new wireless network. Once again, no connection possible. I tried now 4 different access points, but it does not connect with the WPA. Still, first step of the link seems possible (he sees the router and asks for the password, then the router responds), but the laptop does nog acquire a network address and will try until its cancellation. Other laptops have no problems with these 4 a / p

  I updated all the drivers, deleted all and installed the wireless drivers. All tried, but now I give up. It will not connect. I think it might be a problem with the generation of WLAN (Intel 2200bg) modem, but how can I be sure?

  The laptop is still under warranty, so I could have it checked by Toshiba, but I work independent and need my computer every day. Please help me. Thank you!

  Hello

  Just a quick comment: I use the M70 Satellite with the same card WLAN. Last week I installed the latest driver WLAN of the Toshiba download page. I also installed Intel PROSet, but I use Windows WLAN configuration.

  If you want to disable Intel PROSet and just use Windows WLAN configuration press F10 and confirm with YES. You can use WPA encryption, but be sure that you set WPA - PSK (no server) option and choose between two Techniques of encryption (TKIP or AES). On my router default is TKIP. The same settings that you can find in the WLAN Properties on the wireless networks tab.

  If you want to use zero (recovery CD), you can reinstall Windows XP Home edition only.

• my Dell inspiron n5010 is unable to use an ip address to connect to the internet?

  my Dell inspiron n5010 is unable to use an ip address to connect to the internet? and I went into Device Manager > network adapters > then I face three options 1 > virtual broadcom wireless adapter > DW1501 wireless-n WLAN half mini card > Microsoft virtual WiFi Miniport Adapter that should choose?

  Thank you very much

  Hello big evil Dossary

  Follow the steps to connect to a form of wireless link below. Thank you.
  http://support.Microsoft.com/kb/928429

• How to view the user or IP address that connected, and change the parameters of Sonicwall

  Hi guys,.

  I would like to ask if there is a way to see the user or IP address that connected, then change the parameters of Sonicwall? Someone change the Web Page to display when blocking under the content filtering settings, and we would like to trace that connected to change the settings of the said. Hoping for your quick response. Thank you in advance.

  This should be in the journal according to the attached snapshot monitor

  The user/ip name should appear in the column notes.

• Track IP addresses to connect to a database

  Hello
  
  I'm trying to follow all of the IP addresses that connect to the database at the moment. Anyone know how I can do this without having to go through all of the listener log?
  
  Or does anyone know how to analyze the log to extract the IP addresses
  
  Thank you
  
  Stephen

  Actually, there is another option IF you audit connections then the session what IP is stored in the column dba_audit_trail comment_text and you can retrieve the IP address of the column.

  Note that auditing session connect and disconnect may generate a large amount of data.

  HTH - Mark D Powell.

• AOL support said I need to change my IP address to connect

  I had many problems to connect to AOL broadband. The latest is that I again lost the connection to my laptop Equium A110. Although my AOL signal remains strong for my modem Netgear wireless, I can't find a connection to AOL using the ethernet cable and changing the router settings in IE (the standard response of AOL). Support _AOL insist that my IP (illustrated by ipconfig) has changed and that it will not work with the Netgear modem and should be replaced with 192.168.0. (a different number of 1) to resume the service. _ they told me to contact a technical specialist and AOL could not help.

  Are correct AOL, and if so, how can I change my IP address 192.168.0. (any other number 1)?

  I found this web page that suggested a possible solution: http://portforward.com/networking/static-xp.htm

  AJ

  I guess that the solution posted on this site has helped you.

• no connection possible outgoing openvpn

  Recently, I replaced an old router with a time capsule Airport (version 7.7.3) (and in another room with an airport express).

  Since this installation, I am not able to connect to openVPN in the work of the office. There is no problem if I use my old wifi or my IPhone as a personal hotspot.

  When you try to use openvpn I'm always connected to the time capsule Airport (in which case it's interesting)

  Research on 'internet' gives no useful result of which could be underway, so any help is appreciated.

  I forgot to mention (quite probably important):

  -It connects to the VPN that is identical to the work situation

  -I can ping the virtual private network addresses

  -No other "traffic" as possible (ssh, http, https, etc.). Symptom is that it blocks just forever (ssh) or charges for always (web page).

  -J' use tunnelblick

  Mvgr,

  Martin

  Post edited by: cbaahmi

  Such things can sometimes be an MTU problem. See https://groups.google.com/forum/#! topic/tunnelblick-discuss/ttvriICTZV0.

  Another possibility is a DNS problem. The value Tunnelblick (one) route by the VPN and (B) check if IP address of changes (both are in the window "Details of VPN" Tunnelblick 3.6beta20). Wait at least 90 seconds after the connection, and then look in the Tunnelblick journal for a message on the IP address change. (The change of IP address tries to contact tunnelblick.net through its name, and if that fails, by its IP address, so it may help in diagnosing the problems of routing DNS issues).

• Mailing address: is it possible to avoid downloading spam?

  I get a lot of junk emails on my two iCloud and Gmail accounts, that I am connected to the messaging application.

  What I would like to prevent Mail to download any email marked as spam at once iCloud and Gmail servers: I'm happy with both their unwanted detection performance, and I would not have these downloaded emails at all in the mail.

  Is it possible to do it by post? Or in any other 3rd party client e-mail?

  You can't really stop downloading Junk Mail. However, for the gmail account, you can go the the label setting and uncheck the box for don't show in IMAP SPAM. If all messages marked as spam by gmail server will not appear in the Mail. However if filter junk Mail is marking messages as SPAM in gmail, then you cannot stop this action unless you disable Junk filtering in Mail.

  ICloud, you can set it to not store unwanted messages on the server, but the server Junk mailbox will remain under the account in the sidebar.

  I would not try to stop the mail from download them. You can set it to delete at a specific time, or when the mail closes.

• Satellite M60 with Intel PRO Wireless 2200BG - no stable connection possible

  Hi, it is not possible to obtain a good connection with the Intel card and the latest driver from the homepage of Intel, even with all the other drivers, it is not possible. The Forums are filled with problems connecting with this card! I need a solution. Game online (World of Warcraft) is not possible because the ping (Laency) is 5000ms, and server kicks all the time, with other laptops without problems.

  Why!
  When I turn off energy-driver settings, it gets easier, but still terrible connection. Intel or Toshiba do something! Tried already weeks solve this problem with all the possible drivers and settings in Windows XP SP2.
  Other users of the Intel card have the same problems.

  Hello, Robert

  You are absolutely right on this Intel WLAN card. I checked some books forum and many other users have similar problems with different laptops (different producers but the same map).

  I noticed that this card make a trouble with different routers. A friend of mine has Satellite M40 with the same card and has no problem with the Netgear router, but with my Belkin one drops the connection permanently. We did the test with US Robotics router and the connection was not good enough.

  Unfortunately, there is nothing to see. The only solution is to swap the WLAN card and built the other one (Agere or Toshiba one).

  Good luck!

• How can I determine the MACaddress of the Gen 4 Apple TV so that I can connect to my network. Must register on the router MAC address to connect to the internet.

  Security on my network requires that the MAC address of the device must be registered on router or I can't connect to the internet. Does not use a password based security configuration. How to find MAC address before the introduction of Apple TV?

  Contact your ISP

• W520 - no WIFI connection possible

  Hello everyone,

  I just got my new W520. I did a clean Win7 Installer and have the problem that it can not connect to my Wifi network. In any case the cable works. My other laptop connects to Wifi without problem. Diagnostics and automatic question address ends with 'call a few friends' so probably some of you share the same problem or have a work around.

  Win7 identified as wireless network adapter: Ultimate-N 6300 AGN - reinstalles it - no change

  Uninstalled software Lonovo access. -no change, reinstalled the driver again - no change

  Any suggestions?

  UH... found the problem. Thanks for the responses... million unfortunately some dumbass (that's me) forgot that he had assigned macfiltering of wireless connections. So problem solved

• How can IP address - I connect to my computer at home?

  Original title: ip address

  Hello!!

  I have a few questions.

  I have read in many forums that computers running Windows have two ip addresses: internal and external.

  first of all, I don't know the difference between them.

  Then, suppose I want to connect my computer remotely. What ip address to use? It is ip has see when I execute the command ipconfig at the prompt of commands, or ip, I find when visiting ipaddress.com? I ask this question because I saw that look for it in the ipaddress.com of ip address changes each time I connect to my router.

  the ip address I can find in the command line changes (ipconfig command). also, many router gives the same ip address to the computer connected to its network. I say this because I have a friend who uses the router as mine, and we sometimes have the same (192.168.xxx.xxx) ip address.

  How can I connect to my computer at home whenever I need if the ip address of the Exchange computer? Otherwise, I have to check the ip address before you leave the House.

  How can I connect to my computer at home by its name if the two computers can have the same name?

  I noticed that there are too many question, but whatever the answer, I'll be satisfied.

  YO

  1-devices on your local network have internal IP addresses.  Your router/modem translates them your external IP who sees the rest of the world.  Your internal IP address is usually something like 192.168.0.1 etc..

  2. it depends on how you want to connect remotely but you always use the external IP address.  whatismyip.com will tell you what it is.

  Your ISP assigns the external IP and the most dynamically assign (which means that they can change)

  There is a really easy (and free) way to connect to your computer remotely, eliminating the need for you to deal with the IPS called Team viewer.  It is here http://www.teamviewer.com/en/index.aspx

  You simply install viewer of the team on both computers.

• MAC address: Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Is it possible to change the MAC address of a machine & also if there is a way to see the physical address of the machine on the other to see through the command line...?

  Yes.

  Yes.

  Of course - you use 'other/unknown', then...?

  (Google for "MAC spoofing").

• T420 - AC/DC charging connection possible?

  Hello world!

  Since last week, I got a new T420 and I really like it. At the moment I am trying to configure my energy Manager and I am looking for an option, I know that Dell Latidue laptops.

  When I work at home I'm still connected to the AC adapter to achieve maximum performance. I have always try to charge my battery if it is almost empty or at least less than 15%. I don't need my battery charged if there are 90% left. I try to make my battery live as long as possible and, to this end, I prefer a minimum number of fees. I know that there are no memory with Li - ion effect, but out of my experience with portable btteries better noting useless.

  I am looking for an option that says something like "If relie connected to the external power supply, the battery only if it is under # %".

  Is something like that possible with a Lenovo Thinkpad?

  Thanks for your help in advance!

  POTA

  In the powermanager click on the stack, then the "battery maintenance" tab - button.
  Marks "Custimized" and set the level, when the battery needs to be recharged.
  After 'OK', shut down the laptop and turn ("Restart the computer" is not enough - load levels are written in the battery to stop!)

• Windows XP cannot connect to DSL Wireless Modem - locked mode "Acquiring Network Address", never connects. Broadcom wireless card

  I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.

  When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.

  The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).

  I am told that it worked (I can't confirm this, as the player crashed when I got it).

  Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.

  Thanks in advance!

  How do you reinstall Windows?

  If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well.  If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.

  If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.

  However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.

  The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.

  The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  Click the Wireless Networks (see screenshot)
  If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
  Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
  OK your way out
  Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.

  If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.

  If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).