NSLU2 - Vista, to access records

Similar Questions

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Program error Windows Vista - printing access denied 0x00000005

  original title: program error Windows Vista

  I recently installed a Brother QL-500 label printer on my Windows Vista operating system and I am getting a printer - error message (0x00000005) print access is denied.  Brother customer service tells me that it is a mistake to program Vista.  Can anyone recommend a fix for this?

  You have installed the drivers for windows 7, yet?

  Troubleshoot "access denied" when opening files or folders
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  What are the permissions?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Create a new user account and try to print

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Don't update the graphics drivers Vista 64 ('Access denied' / 80070005)

  This has been quite a problem persisting for a while now and I'm not about to set. I have two points of Dell (a desktop and a laptop), both using Vista 64 and nVidia Quadro graphics cards and both have same problem. Earlier, a driver update attempted to settle on Windows Update, but it failed, citing the 80070005 error. After the next restart, completely graphics card drivers did not work at all, forcing windows to return to the graphics compatibility mode. New attempts to update or reinstall the drivers of graphics cards were just as futile. I tried both Windows Update and a downloaded version of nVidia drivers but none worked (the more I get in the way of error messages, it is "Access denied"). I also tried to completely uninstall the drivers and by removing the device in Device Manager, but still no luck. At the end of the day, I did a system restore, but this is not ideal, because the recommended update reappeared in Windows Update again and I have to keep it from settling each time that manually.

  After fishing trawl the internet for advice, I tried all sorts but in vain. I tried to disable my Anti Virus, using subinacl (and others) to restore registry permissions, rename the softwaredistributions folder, run in administrator mode, check the permissions of the update service and checking the status of execution protection. Nothing helps, so any suggestions are appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If this does not work, download and install the update to windows safe mode.

  Check whether the problem is resolved.

  Method 2:

  Try to download and install windows updates which fails to install manually.

  Download the update and install it in safe mode.

  Method 3:

  Follow the instructions in the link below to perform the clean boot procedure, which could help solve the problem of the Windows movie maker.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Method 4:

  In Windows Vista, the built-in Administrator account is disabled by default. In previous versions of Windows, an administrator account was created automatically during Out-of-Box-Experience (OOBE) with a blank password.

  An account administrator with a blank password is a security risk. To better protect the system, the built-in Administrator account is disabled by default in all new installations and upgrades of Windows Vista.

  HOW to: Enable the build-in the administrator account in Windows Vista

  http://support.Microsoft.com/kb/555910

  Try to update built in Administrator account.

  You can also contact nVidia to get help on the installation of the driver.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Vista cannot access networkmap XP due to password protection or less space to the network. (I did not a good password)

  Articles:
  XP machine
  Vista machine
  Router

  Description:
  Well, I set up a network between my XP machine and Vista, Vista sees XP and vice versa.
  But when I try to access the map shared on XP to the Vista machine, it is said that he either without permission or the network doesn't have the space for it or something.

  I don't think that this has something to do with space, because there is enough on the HARD drive.
  But I have not set up a password for the shared either card...

  What is the XP Firewall? I don't want to turn off definitely well.
  All the answers?

  A reboot is almost always useful in this kind of situation (for high-end server, router, firewall, etc., diagnosis, it is NOT recommended, however).

  Do the (temporarily) empty password until solve you the problem would be fine ONLY if the username that you use on the two computers is exactly the same. MCSE - www.nextstepnetworks.com

• Windows vista local access only or limited to the Internet

  I have windows vista on a dell insipirion laptop, purchased in January 2009

  It came with mcafee anti virus already installed, that I removed after the test free and replaced with norton 360
  I use the modem usb 3g for my access internet and had no problems for 6 months

  for about 2 months, I had problems with connecting to and browsing the internet

  My 3 States of modem usb connected with good signal window
  but internet explore cannot display web pages

  the icon at the far right of the taskbar displays access: Local only

  If I click on this and open 3 modem status, under the general tab it has...
  Local IPv4 connectivity
  IPv6 limited connectivity

  If I click Properties, click the Networking tab
  Protocol version 6 (TCP/IPv6) Internet is not always checked
  I check this box, dissconnect 3g, re-connection 3 g, go back to the box to find still uncontrolled

  I have connectivity limited for some time before it becomes local only for awhile, then it finally gives me access to the internet for a short time before going back to local only access. the only thing I can do is to disconnect and reconnect and hope to have online long enough before again losing connectivity internet limited or local connectivity

  IV a 3g send me a new modem
  so have uninstalled and reinstalled the modem

  Reference Dell helped me to put the laptop into the factory State

  Reset all settings to internet explore and disabled all add ons

  diagnostic tells me that I have a problem with one or more network cards, but dell tell me im using a usb modem if it isn't the network cards that have the problem

  Please someone help me to heal this problem of limited connectivity and local only access before going bald of pulling my hair

  Hello Gemzy,
   
  Thank you for choosing Microsoft answers forum for windows vista.

  There are several things that we can try to solve this problem.

  Let's start by disabling all other connections to try to force the wireless connection to request the information needed in the router.  So go to start > Control Panel > network and sharing Center > manage network connections.  Click on each link listed EXCEPT the wireless LAN connection, then click on disable this network device.  Then see if your wire will connect.  You may run the diagnostic and repair utility on the Network and Sharing Center menu to force the wireless card to request information from the router IP.

  If all else fails, go back into the network and sharing Center, manage network connections and right click on the wireless network connection and select Properties.  Then click Internet version 4 Protocol and select Properties.  Click in the box that says "Use following IP address" and enter the information that has been shown in IPCONFIG report for your connection to the Wired Local network above.  Do the same for "use the following DNS servers."  Make sure that you type the IP address, mask subnet, default gateway, and DNS addresses exactly the same than the connection to the Local network was when he got the information from the router.

  To learn more about how to troubleshoot network connection problems, see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  If none of these things work let us know and we will continue to help you.

  Kind regards

  Savan - Microsoft technical support.

• Cannot access records two newly created on the USB.

  * Original title: Chaos Pendrive

  My USB got two shortcuts (with the files icon): "found.000" and "recycled".

  All records are now shortcuts (for cmd or anything in system32).
  I have no data (excluding files that were not in all cases).
  I can't get into folders, which is obviosly (records are now shortcuts).
  It's my size of USB as before the accident.
  What should do?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you can not access both files newly created in your USB key.

  This issue could be due to a spyware infection. I propose to run online scan and check if it helps.

  Connect the USB stick to the USB port and scan it using the Microsoft Safety Scanner and perform the analysis complete on your computer.

  Online scanner.

  A quick way to search for viruses is to use an online, such as the Microsoft Safety Scanner scanner. The scanner is a free online service that helps you identify and remove viruses, clean your hard drive and generally to improve the performance of your computer.

  To run the Microsoft Safety Scanner:

  a. go to the page Web of the Microsoft Safety Scanner Download scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  b. click on Download nowand then follow the instructions on the screen.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with the State of the question, so that we can help you further.

• Should I upgrade vista to access aero to fix excessive paging?

  I'm trying to access aero to help diagnose and resolve excessive paging in my windows vista home basic sp2, 512, 32 with MS security essentials and its 'optional' good definition updates everloading (3 8 only).

  I uninstalled and disabled (some with revo pro) everything I have dared and am down to one, start microsoft.  always opens the processes running with nothing but msgconfig of large areas such as errors, warnings, and chess.  I think I uploaded through the updates way more ms programs services processes applications reports potatoes log files, no appelets, oranges and bananas... I might need to check my email, manage finances, print my taxes and play games online.

  I endured many browser and disk cleans, defrags, system restores, 2 rounds of Mr. fix his and several ms Answer command Office scanning and Advanced PC Tune Up.

  I use also more thousand MB I think with ready boost to a 8 GB flash drive.
   
  I realize disk space, memory, ram... is the question.  It seems that everything I do to earn a little, a fix, fixer, the update or restore resumes.  level 2 support ms think I have enough to do the little that I need, currently c: 102 gb, 72% free; d: 889 MB, 13% free.  now, I'm waiting for management to send me a new disk of vista to attempt a repair.  I'm very leary of this fix, however I wonder if it will launch a new series of adjustments udates, settings and calendar, the problems and worsening the performance...

  the reliability and the performance of the last scan warning of excessive paging and memory diagnosis launched me to try aero.  of course I couldn't find it and I think I meet the other requirements, so I clicked on mr fixit new (no self, let me pics).  Naturally the aero effects are not taken in charge and asks me if I want to upgade this edition of Windows?

  Finally my questions?

  is Mr difficulty it asking me to upgrade to windows 7 (half my support research lead me here)?

  There will be a tax?

  If there are a bunch more things I don't use with another 1000 updated download and this what should I do for my space?

  what the aero feature?  will it be worth?

  He reduced to nothingness the need where correction of upcoming vista disk capacity?

  how much more new stuff will learn?

  should I forget about it and explore superfetch?

  or do I just have to decrease the available virtual memory.  currently set at 1088 MB showing 753 MB recommended?

  and while I am, how can I ask microsoft microsoft Security Center to recognize and to make the operating system of microsoft I have microsoft security essentials antivirus software?

  Aero isn't for graphics memory, and you need the graphics hardware installed to use Aero.

  With your card, you have a very low-end computer.

  Your problem is that you have to little RAM (memory) sp2, 512, 32 with MS security essentials

  Until correct you this, you will always have problems.

  ReadyBoost is only a stopgap.

  See you soon.

• Windows Vista cannot access https Web sites

  Hello

  My friend Tommy has an Acer Aspire 5315 with an Intel Celeron 550 CPU and 1 GB of RAM.  Service Pack 2 for Windows Vista HomeBasic runs.  He got the computer in the United Kingdom but lives now in Australia.
  He wants to access his hotmail and facebook messaging, but can't.
  The http sites normal http://google.com/ work very well for him.  However, it seems that whenever he tries to use a Web site by using an https connection, it gets a "Internet Explorer cannot display this webpage" or equivalent.
  It connects via a Huawei E585 Pocket Wifi device - it connects to wifi then broadcasts a wireless internet connection to his computer.  He gets his internet through Vodafone Australia.  I have a similar device - a keen wireless thus N420.  It can also connect through it.  Its problems occur for both devices.  My internet works fine on my computer using my camera.  Therefore, it is not a problem of modem and is an internal problem to his laptop computer.
  
  All his problems occur in the same way for Internet Explorer, Chrome, and Firefox.  So it isn't a browser-specific problem.
  I have disabled the Windows Firewall.  He always gets the error messages.
  It is not * seem * to have a firewall installed, even if it was AVG free anti-virus installed.
  AVG Vault shows that he has been hit by at least 4 Trojan horses in the past.
  His computer is incredibly slow - processing both with the internet.  My internet is too slow, so this is probably due to a bad ISP.
  Web sites that work:
  http://Google.com/
  http://News.Google.com.au/nwshp?hl=en&tab=wn
  http://login.live.com
  http://Facebook.com
  Web sites that does not work:
  https://mail.Google.com/mail/?tab=WM (i.e. that by clicking on "Mail" on the google home page)
  https://login.live.com/ppsecure/post.SRF?BK=1336377356 (i.e. as soon as it hits "Sign In" on the windows live login page)
  https://www.Facebook.com/login.php?login_attempt=1 (i.e. as soon as it tries to connect on facebook)
  In addition the microsoft FixIt to places like:
  http://support.Microsoft.com/mats/windows_firewall_diagnostic
  seem to download, but not work.
  Any ideas on what could be wrong and how to fix it?
  Thank you!
   

  Hello

  1. what version of Internet Explorer you are using?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/956196

  Method 2:

  Follow the steps from the link below.

  http://support.Microsoft.com/kb/813444

  Method 3:

  Follow the steps from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/967897

• Reminder of Vista do not record

  Always have a computer with Vista but can't get sticky note to record all I get is static when I read?

  Hi LynneHornung,

  Follow these steps:

  Method 1:

  Scan a checker (SFC) system files on your computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  For instructions, see How to use the tool File Checker system to resolve missing or corrupted on Windows Vista or Windows 7 system files

  Method 2:

  Follow these steps:

  Step 1:

  Create a new user account and see if the problem persists.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  Follow the steps in the following article to repair the damaged user profile:

  Difficulty of a corrupted user profile

• Issue of Home premium Vista (cannot access %APPDATA%\protector.exe

  im running windows vista home premium.im tries to install a program but eveytime I try says cannot access %APPDATA%\protector.exe

  Ensure that the registry entries mentioned in the following items are correct. If necessary, run the Microsoft Fixits.

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

• Access wifi with WPA encryption Vista giving "access: Local only.

  I've read many threads on a similar situation. I am convinced that the symptom has many different causes. Nothing I've read solves the problem for me.

  I have toshiba vista laptop and struggled until I've decided to return to the original recovery disk from the manufacturer, reloading everything from scratch. still did not help. The use of WEP encryption works, so I don't know the interface wireless on the laptop works. but it is not acceptable that WEP is such a weak encryption - basically no security. try to use the encryption WPA or WPA2, which does not work for vista. laptop is a few feet from the router, so a lot of signal strength. one other non-Vista computer laptop works well. uninstalled the trial version of mcAfee. updated the drivers and software vista for later. assign an ip address to the laptop, and when it starts up, I see that this address is assigned. Disable all the ipv6. disabled the DHCP broadcast stuff. off the vista firewall.  ipconfig/all is shown below, which seems ok to me. never had Norton or symantic is installed. tried to reset the ip stack. Wired ethernet to the router works. just to get the local access only on the wireless with WPA encryption. The router is quite new netgear WNR2000 and also tried a brand new netgear router multiband with identical results.

  Sure could use some help here.

  Windows IP configuration

  Name of the host...: FamilyComputer
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-16-E3-F2-DE-BB
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address: 192.168.1.99 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
  Physical address.... : 00-1B-24-20-AB-E7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Hello

  You said that he can connect with WEP but not WPA.

  There is therefore no connection with the router under WPA.

  For as far as the OS is concern that WPA doesn't have a general problem in Win XP SP3, Vista or Win 7.

  Encryption in many cases problems stem from the problem of drivers.

  Quote: "I'm still stuck with a non-working wireless network on my Vista laptop and the place where it is normally used. This means in technical terms.

  For example, there's something special about this wireless source?

  You can try to check the integrity of Vista using the SFC - http://support.microsoft.com/kb/929833

  If I were in that situation, I'll borrow a wireless USB network who knows work and try to make sure that it is not wireless card related problem.

  BTW, have you checked the process that there is no residual "junk" left by the safety test.

  Download it, run it and take a look at changing it running.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Vista "Local access only" and "Unidentified network" problem

  Hi recently my Windows Vista Home Premium - 32-bit has had problems with the internet.

  It was only said 'Local' next to the 'access' and said "Unidentified network" and used to connect me on the internet.

  This problem occurs when you try to connect through an Ethernet cable to the Modem and the router and also while wireless.

  I know that this is not the fault of my Modem/Router, because my laptop says this when I try to connect about internet anybodies.

  Ive spent a good 3 days on this problem, looking for every website I could find searching for answers. NONE of them have worked :(

  Ive done everything except Microsoft and their paying a call answer...

  So if someone can help me, please and id love for it :)

  Also I know people will ask ipconfig/all, but I'll wait for a response and download what the person asking. Thank you.

  I will not need now, I used a program called "Connectify" on my windows 7 laptop. (connectify is a program that acts as a hotspot access point)

  Somehow I was able to connect my Windows Vista computer to the internet via Connectify and I ran all the updates on my laptop with Windows Update, now I am able to connect to my router and modem without any problem.

  Hope that if anyone else has this problem, they can also use Connectify to Windows 7 computers and difficulty there problems internet as I :)

  DjKilla ICE

• I have a problem of Windows Vista permission/access denied

  E-mail address is removed from the privacy * I have a problem in Windows Vista in which case there are 2 profiles that are both administrators. The problem is that, while trying to do a repair on the C drive to free up space, I get the message that ACCESS is denied. I can't free transer data on external drive Western 1 TB space, kind of frustrating. 0 bytes remain & access continues to be denied. Property, permissions are not allowing me to correct this situation. Justin [removed personal information]

  Hello

  ·        What is the case for the two user accounts?

  You can try to create a new user account with administrator privileges and check if you are able to transfer the files. If you are able to transfer files using the new user account, then this is the problem with the permissions on the drive.

  To apply permissions to a file or a folder

  (a) right click on drive C:\ then clickProperties.

  (b) click on anti-terrorism tab and then click on edit.

  (c) do one of the following:

  ·        To set permissions for a user who is not quoted underGroup or user names, click Add, type the name of the user or group, click OK, select the permissions, and then click OK.

  ·        To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions, and then click OK.

  Also, check if your computer is infected with a virus.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.