Reminder of Vista do not record
Always have a computer with Vista but can't get sticky note to record all I get is static when I read?
Hi LynneHornung,
Follow these steps:
Method 1:
Scan a checker (SFC) system files on your computer.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
For instructions, see How to use the tool File Checker system to resolve missing or corrupted on Windows Vista or Windows 7 system files
Method 2:
Follow these steps:
Step 1:
Create a new user account and see if the problem persists.
Step 2:
If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.
Follow the steps in the following article to repair the damaged user profile:
Difficulty of a corrupted user profile
Tags: Windows
Similar Questions
-
3.5 mm microphone does not record, VIsta 64
I'm having a problem getting my new 3.5 mm microphone to work properly. The microphone is plugged in correctly in either taking rose in the back or the front of the case, but no sound is recorded. I checked the menu sounds through "Manage Audio devices" in the control panel and Yes, the green bars are moving. All levels are up, nothing is cut. I looked in the Realtek Audio Manager and the recording level is maxed out as well. The only thing that is cut is the Volume of reading to the Realtek program (reactivate this only causes the microphone continuously power the speakers and has no record effect). I checked several programs (steam, Windows Sound Recorder, Teamspeak, Mumble) and bars green all spend in each, but still no sound is transmitted. The microphone was working on a Skype test call, it worked on another computer, and I used USB microphones without problem on this machine before, so I'm fairly certain that this is not a hardware problem. Please help, I can't find anything else that I could turn the sound back on!
Hello
What is the make and model on the microphone?
Step 1: You can help us fix the article below and check out them.
Troubleshoot audio recording
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problemsStep 2: Update sound card drivers.
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links -
My laptop HP Pavilion will not record any sound at all - please help
Dear all
My laptop Hp Pavilion is not allow me to record all sounds - not in the built-in microphone and not through any plug microphone I have.
-J' already checked that my microphone is not muted
-J' already checked that my microphone is set to the default device
-J' already checked that my burning software (Audacity) has selected as the device microphone to take his
-I think I have the latest drivers for my microphone, but I'm not 100% sureCan someone please help me with this? I would be very grateful.
Thanks in advance
Hello
Method 1:
I suggest you to visit the links below and check if it works.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/record-soundMethod 2:
You can also refer to the steps below:
a. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.
b. click on the recording tab, click on Microphone and then click Properties.
c. click the levels tab and make sure the mute button is enabled, if off to click on it to activate sound for this connection and then click on apply.
d. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.See the link below:
-
I have a compaq presario desktop with windows vista, today he gave me a fatal error on startup and the blue screen of death... horror! I tried the system restore, it says I have no restore points, I tried to start in safe mode, it stops just after running through a list of all the drivers. I put in the original disc and has managed to enter the prompt orders and chkdsk, which doesn't give me any options. Tried running sfc scannow, he says: it cannot perform this function. Help! Does anyone have any ideas how can I fix? Of course, I'm a fool and have some pictures and other things on the hard disk that are not recorded on a disc. I thought I could go in safe mode and save my files but it stops just when I try to go into safe mode. Everything and I mean ANY help would be much appreciated.
Thank you!!Shoot Hd, put it in a USB enclosure, get on another computer and if the HD is not dead presto.
-
I just installed 32-bit windows vista business on an old dell computer of three years, including drivers and utilities. The ATI Radeon HD 2600 driver is current. But I can't recognize dvds/cds when I try to run them in Windows Media Player or Real Player. How to attack this problem?
Hello
Do not forget to check with support of system manufacturer (manufacturer of motherboard for customized systems),
their documents online and ask in their forums (if any) on the problems during the upgrade
for Vista. Check also with the support of the real manufacturer of the CD/DVD drive and other resources.-------------------------------------------------------------------------------------------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.
I looked at the information system and noted that there is a device error. After checking for a solution online, this is the message I got:
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.
Hello
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Try to burn the DVD when getting message the disc is not recordable
When you try to burn the DVD we continue to receive the message that the disc is not recordable. Please insert a recordable or rewritable disc. We tried the following blank dics, the DVD-R DVD + R DVD - rw and DVD + rw. Any suggestions?
The following links may be worth a visit:
(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsAlso I have seen reports that the use of a technology mobile broadband
device such as a USB Dongle can cause problems...See the following link:
Dongle Internet cache burner
http://www.windowsdvdmaker.com/forums/thread/1905.aspx -
Profile of user in windows vista does not load, what should I do?
The family member profile, will not record could you please put a solution to this promblem.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Sound Recorder does not record
Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2
Sound Recorder does not record when you select Save the meter shows no activity and there is no reading. When I tested with Skype this counter moves indicate he picks the sound, but reading all that was heard was a buzz. The microphone works fine with Yahoo messenger for calls to land lines to cell phones and Computers computer 2
===============================================
Maybe the following response has already posted by: Azam K. would be worth a peek:Sound Recorder does not not under Vista
http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/cf6003b6-AADD-4107-a1b7-2c9b88a3f48bVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
vISTA can NOT DETECT THE READER of CD/DVD,
WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?
Thank you
Hello
Code 39 means that the driver is corrupted or missing.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows vista will not load or run.
on startup, I get a repar recovery option. I hit that and nothing happens but a blue screen. I don't have to restar windows wndowsdisk. what I can do. cant it be started
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you are finished,
See you soon.
Mick Murphy - Microsoft partner
-
Vista will not start. Loop continues to the Recovery Manager.
I can't cross the Recovery Manager. I tried a restore. I tried to boot into Safe made. All roads lead to Recovery Manager. I get a blue screen that begins with the System Recovery Options
For any info re .fbw format files backed up, contact HP directly.
http://www.allformp3.com/extension/what-is-the-FBW-files.html
You have several choices for the way to resettlement; read the info below...
And is also included in this response data recording methods.
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Your main hard drive data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.
So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.
Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
Help, please...Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:
Consulted
Attributes
Created
DocAuthor
DocComments
DocSubject
DocTitle
Modified
Name
Size
Type
To writeHere is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .
I hope this helps.
Good luck! Lorien - MCSA/MCSE/network + / A +.
-
Windows and windows vista do not open after an update.
An update of windows vista seems to go wrong and my phone froze. I waited an hour and then just turned off and now my laptop does not open windows and there is a message saying that the files are damaged or lost and I have to use a windows install disc, but I don't have a record like that. All previous updates have been very well and I wonder how I can get into my program now?
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Read this on how to change the update settings to find the problem and remove the updates:
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Half completed txts endangered endangered
Hey,. I save popular numbers sometimes SMS their first and then adding them as contacts in this conversation of txt. Today, I did it but cannot send the txt that I received other txts while typing. In response to these txts I lost the txt I was sendi
-
Middle by clicking on the 'go' button is no longer, opens a new tab.
When you pasted a link in the address bar and middle-click on the 'go' button, it is used to open a new tab to the new address. Now, it only goes to the average current tab page - by clicking on the button refresh (without a new link) always opens in
-
Qosmio F20 - 153 - stuck on the log in page
Hello I have a Qosmio F20 - 153 and when I boot up I get beyond the log in page. It won't let me choose my username so I'm just stuck on this screen. I think I need to perform a recovery CD system but I don't have the CD. Is it possible to download t
-
normally I always typed 'face' in the address bar and I just click on the first link to go to the facebook home page, but on my new laptop, he doesn't remember that I have hit ever. I checked all my settings and my story is all saved and I can go bac
-
Air of the iPad at all lights is also full of its battery
Air of the iPad at all lights is also full of its battery