NTLDR missing error

Similar Questions

• Satellite Pro 4300: error - NTLDR missing

  Hi all

  I have an old Satellite Pro 4360, P3 700 mhz.
  I'm trying to upgrade the Bios to install Ubuntu Linux.

  However, by following the instructions on the download of Toshiba Bios, IE change the boot sequence for the floppy drive with the disc in the drive that contains the update files, I can't update and just got the message:

  NTLDR missing

  Someone help with this?

  Also, when I try to run the live CD, after changing the boot sequence in the CD-ROM, I get no response and the computer continues to boot from the disk with Windows 2000 Pro?

  Someone help with this?

  Hello

  "NTLDR is missing" usually means that the "NT Loader" of an operating system with the kernel NT or NT-technology cannot start the operating system. (Such system NT could be Win NT, Win XP or Win 200o)

  But it s strange when a drive reports an error message. What was on the disk before? Was the drive some disk before starting? If so, then proceed as follows:

  Format the drive in Windows 2000 with the option to make a disk and copy the files from the BIOS on this subject. Then boot from the disk and update your BIOS. Ususally it should work.

  Please give a few comments if you managed...

  Welcome them

• Satellite A200-1AX (PSAE6) NTLDR missing after backup retoring

  Hello my computer toshiba laptop A200-1AX (PSAE6) it came with Vista pre installed but I installed windows xp on it.
  Everything went well and I used acronis true image 11 home to perform a backup.

  Yesterday I tried to change my driver letter, and he told me that I can not change the letter.
  Then when I rebooted after awhile my windows would be stuck on the Welcome screen... then I tried to restore the backup with acronis bootable media... after the restore is completed and tried to boot, I have ntldr missing :(

  What has gone wrong? Can I register my cell phone from another format?

  Don t think that it would be able to solve this problem without reinstallation of the OS.

  Read some reviews on the missing NTLDR to error and one of the guys here in the forum found a solution to unlock the HARD drive and install XP:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  Check it!

  If this will not help the Toshiba Recovery CD is the last resort...

• NTLDR missing after XP Pro install attempt.

  Hey

  I'm trying to set up a mini PC for my carputer project. I started using a USB CD-ROM for initial installation. It went well, so he came up with errors and is stopped and restarted. It came then with NTLDR missing. I did some research and thought it might be the CR ROM play up. So I plugged a different rom using the IDE connectors. I started the installation again. He has crossed all the stages, not the format, and then began to load the files. At half way through then just tt once again restarted itself. Now when it gets to the screen of BOOT, and when "boot from CD" appears, the machine restarts just all the time. When I remove the installation disc comes with the NTLDR missing. I'm really into the arms of this problem. I'm really appreciate some advice and help please.

  Thanks in advance!

  http://support.Microsoft.com/kb/320397

  or attempt a repair.

  Use of the

  chdsk/p

  command in the recovery console

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  If this post answers your question, click mark as answer .

• NTLDR missing on a drive, I don't want to not start

  Hi all

  I have a few disks USB that I can boot the computer with them is plugged. No problem. But there is one in particular (NFTS, 1 TB) that its plugged the computer tries to boot from and I get the error NTLDR missing . I don't want windows to try to boot from that disk
  I've never done this bootable disc at least not intentionally. I looked for the files in the root of the system drive and found nothing. By comparing the information of partition (windows disk management) with other readers, the only difference is this particular drive is healthy (Active, primary) while others are just healthy (primary).
  The 'active' is guilty? If yes how can I do not Active?
  Thank you

  Not an answer to your Q readers but usb was never designed to be connected on startup, or a stop, for various reasons, mainly the risk of alteration of the disc, but I digress;

  Open a command prompt and type DISKPART.

  Type LIST DISK
  Type SELECT DISK n (where n is the number of the USB)
  The LIST PARTITION type
  Type SELECT PARTITION n (where n is the number of the active partition that you want to be inactive)
  IDLE type
  Type EXIT to exit DISKPART
  Type EXIT to quit the command prompt
  Reset

• Portege S100: ntldr missing, missing HDD installation

  User has virus and tried to reinstall xp but failed and given its s100 me.

  Computer startup gives NTLDR missing message, when you try to reinstall xp system is unable to find the hard drive. The hard drive is displayed in the BIOS and connect it to my computer via USB is no problem.
  Any suggestions? The mobo is broken or am I missing something obvious here?

  Oh, user had no idea where manuals and cd are therefore using normal installation cd.
  See you soon
  / Lukas

  Hello

  Maybe I have a solution.

  Please check that two sons of this Toshiba forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  Users have found a way to unlock the HARD drive and reinstall the OS again.

  Check it out!

• [Solved] 3 8 tab (TB3-850F) missing error 64 gb SD - SD Sandisk card, reinsert the device.

  I have a SanDisk Ultra 64 GB 48 Mbps MicroSD SDSQUNB UHS-I memory TF my said Tablet often missing and needs to be reinserted. I take out the card and was able to recover and it works for a while and later the error appears. Since then put the SD card, the Tablet sometimes turns off and won't turn on back in now the button for a few seconds. I am trying to use the SD card as internal storage.

  Is there a list of tested known working 64 gb SD cards for this Tablet?

  I would appreciate anyone using this exact model Tablet happy to let me know if they are successfully using a 64 GB SD card.

  I'm also confused because I bought this tablet it supports 64 GB cards according to the technical specifications that I saw on the Web site of the Lenovo Australia, but other pages to state that this tablet supports up to 32 GB cards.

  If the Sandisk card I have been tested to work, do you have suggestions on how to make it more reliable. I did a factory reset on the Tablet and he was always in trouble. My Tablet - hardware version is LenovoPad-TB3-850F, build number is 850F_S100025_160608_ROW-TB3. It is currently running 6 Android. I put the SD card in the SD Sandisk adapter and tried in my laptop and it works very well in my laptop (an old Acer laptop). Please let me know if you need further information.

  I just re-formatted the card to be used as a portable storage (not ideal but I can live with that) and will test it in the coming days.

  Edit: solved. See my post below.

  I bit the bullet and bought another brand 64 GB microSD card, and it works! -In short - use a Transcend brand card.

  For the record, my tablet is a Lenovo 3 8 ", TB3-850F tab; sold by Lenovo Australia such as tab 3 A8-50 with the number of product ZA170082AU. Android version 6.0, kernel 3.18.9, number of Build TB3-850F_S100025_160608_ROW. The TB3-850F_160412, Hardware version LenovoPad-TB3-850F software version.

  The adapters of SanDisk Ultra UHS - I 64 gb card, SDSQUNB part number - 064G - GN3MA, is not compatible with the Lenovo TB3-850F tablet.
  "Internal storage" map would work initially but after a short period, the missing error Sandisk SD card, reinsert the device. would appear. The card must be removed and then reinserted to work.
  As 'storage' map works initially but more later disappear, this time without error and require the withdrawal and rehabilitation at work.

  I tried reformatting the card on my laptop using a fat32 formatting tool, the Tablet would reformat the card once installed in any case if this step is not necessary.

  The adapters 'Premium' Transcend UHS - I 64 GB card, TS64GUSDU1 part number, has been installed and configured as "internal storage" and has worked well and remained functional after several power cycles, recharge and sleep/use of cycles.

  I hope this information helps someone.

• When I turn on the system of its display in the moniter as NTLDR missing.please give me the solution for this problem.

  When I turn on the system of his displayiing on the moniter as NTLDR missing. Please give me the solution for this problem

  Hello

  NTLDR is not used for installation of Vista, it's a vestige of WinXP / 2K. If it is listed as "missing", then your boot sector is damaged and must be repaired. The steps are described here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to fix Sqlite3.dll not found or missing errors?

  How to fix Sqlite3.dll not found or missing errors?

  Hello

  1. were there any changes (hardware or software) to the computer before the show?

  2. When you receive this error message?

  Follow the steps mentioned below and check if that helps.
  Method 1:
  You can perform a clean boot that allows to check if startup item or services to third-party application is causing a problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, be sure to start your computer in normal mode.

  Method 2:
  A few sqlite3.dll errors may be related to a virus or other infections of malware on the computer that has damaged the DLL file. Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:  Before you perform security analysis, make a backup of important data.

• several errors at startup related to the file missing error rasman.dll

  several errors at startup related to the file missing error rasman.dll

  Hello

  1 did you changes to the computer before the show?
  2. What is the exact error message or error code?

  I suggest you perform the clean boot and check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  It will be useful.

• Get a dvacore.dll is missing error

  Hello

  
  I am trying to change a sequence in Adobe Premiere Pro Audition.cc and I'm getting a dvlcore.dll is missing error and it asks me to reinstall the program. My question is could someone tell me what the problem is and what program (audion or creation) that I need to reinstall

  See you soon

  I think it's a dynamic link file, try reinstalling the PP and if this does not work, also reinstall to the.

• obtain an expression of values missing error!

  obtain an expression of values missing error!
  
  
  insert into rate_plan
  BST_ID,
  BST_PLANOWNERID,
  BST_CREATIONDATE,
  BST_ISACTIVE,
  BST_RATEPLAN,
  BST_PLANTYPE,
  BST_ROUNDEDRATINGFLAG,
  RANGE1,
  RANGE2,
  PEAK_PULSE,
  OFFPEAK_PULSE,
  RATING_UNIT,
  RATING_TYPE,
  PULSE_UNIT
  SELECT
  bst_id_seq.nextval,
  SYSDATE,
  1,
  NULL,
  1,
  1,
  1,
  1,
  10,
  10,
  "MO."
  NULL,
  10
  Of
  HSIA_PLAN_DETAILS
  
  Published by: user8731258 on July 23, 2010 04:17

  In the column list must be enclosed in ():

  insert into rate_plan
  (
  BST_ID ,
  BST_PLANOWNERID ,
  BST_CREATIONDATE ,
  BST_ISACTIVE ,
  BST_RATEPLAN ,
  BST_PLANTYPE ,
  BST_ROUNDEDRATINGFLAG ,
  RANGE1 ,
  RANGE2 ,
  PEAK_PULSE ,
  OFFPEAK_PULSE ,
  RATING_UNIT ,
  RATING_TYPE ,
  PULSE_UNIT
  )
  SELECT
  bst_id_seq.nextval,
  null,
  sysdate,
  1,
  null,
  1,
  1,
  1,
  10,
  10,
  null,
  'MB'
  FROM
  HSIA_PLAN_DETAILS
  

  SY.

• Error - NTLDR missing Windows XP Home computer does not start.

  Original title: XP-based computer does not start.

  XP Home does not start after I uninstalled a large file of Samsung mobile phone. I get a missing NTLDR error message and have had a System32 error as well, but there is no DOS prompt that would allow me to access anything whatsoever. Another problem is that I lost my installation CD. I initially bought this Dell PC nine over 6 years ago, so can provide identification details, if necessary program. Could someone tell me how I can make a recovery CD please? (No floppy drive not installed in the PC). To further complicate things (Yes, I know - I created many more problems that we all need), I have to keep my files on the hard disk, so cannot do a complete reformat, unless someone can tell how to save them somehow. My BACK skills could be summed up as "plodder inexperienced but determined!

  The file might be missing or it could just be that XP can't find it if your file system has somehow got corrupted.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  System32 error, you see, is what exactly?

  Depends on a few factors, there could be another copy of the file NTLDR in other places on your system, but you have to start on something to find out whether there is or not.

  After answering the above questions, I begin to make a CD from Recovery Console bootable XP by running a chkdsk/r, first on your HARD drive and then see what is left to do.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• NTLDR is Missing - error

  Hello
  I have a Dell Inspiron 1525 running vista. He walks yesterday and get an error message "NTLDR is missing, press any key to restart."

  Then when you press a key, the error message keeps coming up

  Someone knows how to fix this?

  Thank you
  Lee

  Hi Lee,.

  You have XP installed on a different partition?

  You can try these methods to solve the problem.

  Method 1

  Step 1

  Try to start in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot into safe mode, you try to perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the lock button, and then click restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  If the method above does not solve the problem try Method 3

  Method 3

  I suggest you follow the steps in the article.

  http://support.Microsoft.com/kb/927392

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite M115-S1061 is overwritten with an error - NTLDR missing

  My laptop crashed with an error of press lack NTLDR CTRL + ALT + DELETE

  Tried to recover with the recovery toshiba and dvd applications. 6 minutes after the resumption to get a 10e7160017 error message. then stops can not get anywhere. Have I had a cd of windows xp with laptop recovery?
  also I still have a 1 year warranty should I send it?

  your help would be appreciated.

  Kate

  Hello

  Well, the laptop will run the procedure of recovery without any problem.
  If this installation may not finish as should be and you are not able to install the operating system, you must contact the ASP (service provider) service in your country.

  Maybe there is something wrong with the equipment don t worry, the guarantee must cover everything to take