Ntoskrnl.exe + df273 and ntoskrnl.exe + 70740 DRIVER_POWER_STATE_FAILURE

Similar Questions

• BSOD caused by ntoskrnl.exe - bug DRIVER_POWER_STATE_FAILURE

  Hi all

  I'd appreciate help with my laptop problems I don't know neither the cause nor the solution...

  For several months, my laptop refuses to close directly. I explain: when I want to stop it, any reboot my laptop and I have to stop him again so he can actually stopped. In addition, at each attempt to stop / restart, I have this incredible Blue Screen of Death for 15 to 20 minutes, then my laptop actually restarts. Once it has restarted, it works normally for 3 minutes and then freezes for a duratation ranging from 5 min to 40 min...

  In addition, since the beginning of these problems, my laptop detects no USB devices (mouse, external driver...)...

  Please help me, this situation is driving me crazy...

  My laptop is an Asus ux32v and runs on 64-bit processor - i5 3317U and Windows 8 (if it helps).

  Here is the link to my minidump files:

  https://www.dropbox.com/sh/ix3bf3v7aog2xz5/AAAcgX3yNBDWVAj5JXs9JNzSa?DL=0

  I tried to open these files with software like BlueScreenView but couldn't do much about it. What I realized is that it was caused by ntoskrnl.exe.

  Thank you in advance for your help!

  MS

  It is possible because you do not remove it completely.  He was always loaded into the current DMP file

  You do not update to win 8.1.  I'll wait until you do.

• Ntoskrnl.exe + 78a8a (DRIVER_POWER_STATE_FAILURE) - Windows 7 x 64

  Lately, I get the BSOD 5 times a day.

  I enclose below the dump files

  http://www.girlshare.ro/34038244.9

  http://www.girlshare.ro/34038244.9

  If anyone can help I would really appreciate it

  Ricklys

  These have been associated with RtsUStor.sys USB Mass Storage Driver for 2 K/XP/Vista/Win7 of Realtek Semiconductor Corp.  I remove the current driver and install the latest driver available.

  

• Ntoskrnl.exe causing "DRIVER_POWER_STATE_FAILURE" in case of sleep

  I recently started getting this error and have tried Googling it. It seems that a lot of people have had it, but it turns out that the root of the error may be different drivers. To give me links to others with the same question will not help me directly. I tried "WhoCrashed" to obtain a report, but it's not really give me the driver directly related to the accident.

  I was really hoping that someone could at least tell me I know so well how/where to start to fix it.  I have installed 3 new devices recently, so it could be one of them.  I've attached the link to the Skydrive file that contains 3 last minidumps.

  It seems that I get this error when the computer is in "standby", or go inside.  Because when I turn on my computer, I still get the same problem that popping up saying windows 8 has had a problem...

  Help, please!

  SkyDrive minidump - zip files https://skydrive.live.com/redir?resid=BEF9E4F4210692E3! 671 & authkey =! AJwQ3D4pRRcXqC8

  Billy

  These related to the Rt630x64.sys 8101E/8168/8169 NDIS 6.30 64-bit driver from Realtek.  I would like to re - install the latest driver available.
  
  Other pilots who need update
  lmimirr.sys 10/04/2007 18:32:45
  C:\windows\system32\drivers\lmirfsdriver.sys 2008-07-14 12:26:56
  LGBusEnum.sys 2009-11-23 21:36:48
  LGVirHid.sys 2009-11-23 21:36:48
  AsUpIO.sys 2010-08-02 22:47:59
  ASUSFILTER.sys 20/09/2011 11:46:33
  PxHlpa64.sys 2011-10-17 10:29:34
  Rt630x64.sys 30/07/2012 12:03:12

  How to find drivers:

  
  Search Google for the name of the driver
  Compare the Google results with what is installed on your system to determine on what device/program, it belongs to
  Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  If there are difficulties to locate them, post back with questions and someone will try and help you find the right program

  The most common drivers can be found on these pages:
  http://www.carrona.org/dvrref.php
  http://SysNative.com/drivers/

  Driver manufacturer links are on this page: http://www.carrona.org

• After sleep ntoskrnl.exe error 0x0000009f DRIVER_POWER_STATE_FAILURE

  DRIVER_POWER_STATE_FAILURE after sleep

  When I put my laptop to sleep by closing the lid or choosing sleep from the beginning, I get a bsod (ntoskrnl.exe 0x0000009f DRIVER_POWER_STATE_FAILURE) when the recovery.
  BlueScreenView report:http://dl.dropbox.com/u/12993257/bsod.htm
  Empty the file: http://dl.dropbox.com/u/12993257/091211-34538-01.zip
  Also, for some reason that I do not get the bsod when it puts itself in standby (IE after expire) but I understand when it hibernate itself.
  Any help is appreciated!
  Phil

  Hi chubble10,

  Method 1
  I suggest you try the steps from the following links:

  Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".
  http://support.Microsoft.com/kb/975599

  stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/981848

  Method 2
  This issue could be due to corruption of the graphics card driver. I suggest you to update the graphics card drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows 8 blue screen - DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

  I have a new Sony Vaio Pro and have experienced outages of system 3 times.  All the accidents that happened after I've restored from hibernation and were related to the bug check DRIVER_POWER_STATE_FAILURE.  After the first two accidents, I ran Sony diagnostics on the memory and hard drive SSD and they passed the test.  I even sent my Vaio Pro to the repair depot to Sony for a test on the memory, hard drive and other hardware and they all passed.

  I found my Vaio Pro last Wednesday and updated the Windows 8 from scratch.  This morning, after the resumption of hibernation, I realized my Bluetooth mouse did not work.  So I stop the laptop hoping a restart could solve the problem.  However, it took almost 5 minutes before they would stop and restart Windows gave a warning:

  "Experienced problem with closed Windows.  Your PC fell on problem.  This problem case your PC to restart.

  BlueScreen Viewer it pointing DRIVER_POWER_STATE_FAILURE caused by driver ntoskrnl.exe.

  BlueScreen details as follows:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  DRIVER_POWER_STATE_FAILURE

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options and then

  select Safe Mode.

  Technical information:

  STOP: 0X0000009F (0X000000000000012C, 0XFFFFFA80196707C0, 0 X 0000000000000004, 0XFFFFF880009EC810)

  Ntoskrnl.exe - address 0xfffff80189072106 base at 0xfffff8018901e000 DateStamp

  0x51a966cd

  Here's my minidump file:

  https://DL.dropboxusercontent.com/u/1928780/093013-7531-01.dmp

  File Msinfo32.NFO:

  https://DL.dropboxusercontent.com/u/1928780/Msinfo32.nfo

  Dump file memory (do not know why this file is nearby big 550MO):

  https://DL.dropboxusercontent.com/u/1928780/memory.dmp

  p.s. I think this may have something to do with my Bluetooth driver I had experienced many times the Bluetooth driver has been disabled by Windows and the event viewer reported "the Local Bluetooth is not indeterminate way and will not be used.  The driver has been unloaded. "

  Thanks in advance,

  William

  Hi William,.

  The attached file of the DMP is the error checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  9F, {4, 12 c, fffffa80196707c0, fffff880009ec810} error checking

  Parameter 1 of the bugcheck is 4 , which indicates that the transition of power over waiting to synchronize with the Pnp subsystem.

  The 2nd setting is 12 c , which indicates that it is exceeded for a total of 12 seconds.

  By default, the crash dump is failing UsbHub3.sys who is the pilot of HUB-USB3 (System driver and not the true cause, and is due to the fault by something else).

  If we look further into the dump:

  ERROR: Module load completed but symbols could not be loaded for btmhsf.sys

  FAILURE_BUCKET_ID: 0x9F_4_btmhsf_IMAGE_UsbHub3.sys

  Implicit thread is now fffffa80 196707 c 0

  ^^ If we run one! thread on the address fffffa80 196707 c 0:

  Child-SP RetAddr: Args to child: call Site
  fffff880 '20b42f20 fffff801' 890bb7cb: fffffa80'00000001 00000000'00000000 00000000'00000003 00000000'00000000: nt! KiSwapContext + 0 x 76
  fffff880 '20b 43060 fffff801' 890ba60f: fffffa80'18b23ef8 fffff880 '0115a 178 00000000 00000000' fffff880' 0622a 202: nt! KiCommitThreadWait + 0x23b
  fffff880'20 b 43120 fffff880'06114700: fffffa80 '16115fd8 fffff880' 00000001 00000000' 00000000 00000000'00000000: nt! KeWaitForSingleObject + 0x1cf
  "fffff880 '20b431b0 fffff880' 06117ef0: 00000000 ' 00000018 fffff880 ' 0622a2f8 00000000'00000000 00000000'00000018: btmhsf+ 0 x 33700
  fffff880 '20b431f0 fffff880' 060fb1e4: fffffa80'17 has 00030 fffff880 '20b433b0 fffff880' 0622a2f8 00000000' 00000000: btmhsf+ 0x36ef0
  fffff880 '20b 43260 fffff880' 060e2b84: 0000057f 'e9eaddd8 00000000' 00000127 fffff880 '0622a2f8 fffff880' 0115 has 178: btmhsf+ 0x1a1e4
  fffff880 '20b432b0 fffff880' 060e2cce: 00000000'00000008 fffff880 '20b 43370 00000000'00000008 fffff880' 20b 43378: btmhsf+ 0x1b84
  fffff880 '20b432e0 fffff880' 0114ecb0: fffffa80'16153860 00000000 00000000' fffff8a0 '04c3a748 fffff801' 89403cfe: btmhsf+ 0x1cce
  "fffff880 '20b 43310 fffff880' 010e881d: 00000000 ' 00000127 fffff880 ' 20b433b0 00000000'00000119 fffffa80'16153860: Wdf01000! FxPkgPnp::PnpEventSurpriseRemoveIoStarted + 0x2c
  "fffff880 '20b 43340 fffff880' 010e9032: fffffa80 ' 16153980 fffffa80' 16153988 fffffa80 ' 16153860 fffff880 ' 20b434c0: Wdf01000! FxPkgPnp::PnpEnterNewState + 0x1a1
  "fffff880 '20b433e0 fffff880' 010e8cdd: 00000000 ' 00000000 fffff880 ' 20b434c0 fffffa80 ' 16153970 fffffa80' 16153860: Wdf01000! FxPkgPnp::PnpProcessEventInner + 0 x 122
  fffff880'20 b 43450 fffff880'0114 701 d: 00000000 00000000' fffffa80 '16153860 fffff880' 00000000 00000000 00000000': Wdf01000! FxPkgPnp::PnpProcessEvent + 0x18d
  fffff880 '20b434f0 fffff880' 010d1ecf: fffffa80'16141 b 30 fffff880 '20b 43570 00000000 00000000' fffffa80' 1615d1d0: Wdf01000! FxPkgFdo::_PnpSurpriseRemoval + 0 x 25
  fffff880 '20b 43520 fffff880' 010c99da: fffffa80'197 b 9010 fffffa80 '197b 9010 fffffa80' 197b 9010 00000000 00000000': Wdf01000! FxPkgPnp::Dispatch + 0x18f
  "fffff880 '20b 43580 fffff880' 010c9aa6: fffffa80' 197b 9010 00000000'00000005 fffffa80 ' 161531 c 0 fffff880 ' 062fca20: Wdf01000! FxDevice::Dispatch + 0x19a
  fffff880 '20b435c0 fffff880' 062e3cbe: fffffa80 '197b 9010 00000000 00000005' fffffa80' 1615e190 00000000' 00000000: Wdf01000! FxDevice::DispatchWithLock + 0xa6
  fffff880 '20b 43600 fffff880' 062e3484: fffffa80 '197b 9010 00000000 00000000' fffffa80' 1615e190 00000000' 00000000: bthport! BthDefaultPnpHandler + 0x2a
  fffff880 '20b 43630 fffff880' 062e2cc1: fffffa80 ' 1615e190 fffff880 '062fca17 fffffa80' 1615e190 fffffa80 ' 197b 9010: bthport! BthHandleSurpriseRemoval + 0xc4
  fffff880 '20b436b0 fffff880' 062e2b04: fffffa80' 197b 9010 00000000'00000701 fffff880 '062fca20 fffff880' 20b 43800: bthport! BthHandlePnp + 0x16d
  fffff880 '20b 43700 fffff801' 8940a8f7: fffffa80 '1615e040 00000000' c00000bb 00000000 00000000' fffff880' 00a 82180: bthport! BthDispatchPnp + 0 x 68
  "fffff880'20 b 43750 89526 fffff801 39 d: 00000000 ' 00000017 fffff880 ' 20b 43819 fffffa80 ' 16137710 fffffa80' 16137060: nt! IopSynchronousCall + 0xc7
  fffff880 '20b437c0 fffff801' 895265e6: fffff8a0 ' 04069710 00000000'00000308 fffffa80' 16137060 00000000 00000000': nt! IopRemoveDevice + 0xd9
  fffff880'20 b 43880 fffff801'89526501: fffffa80'16137710 00000000 00000000' fffff8a0 '0c432a01 fffff880' 20b 43930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
  fffff880'20b438d0 fffff801'89526468: fffff8a0 00000000'00000000 00000000'00000000 ' 0c432a70 fffffa80'16137710: nt! PnpDeleteLockedDeviceNode + 0x5d
  fffff880 '20b 43910 fffff801' 89525bcb: 00000000 00000000' fffff880 '20b43a70 fffff8a0' 0b89e6f0 00000000'00000005: nt! PnpDeleteLockedDeviceNodes + 0 x 98
  fffff880 '20b 43970 fffff801' 893b52e5: fffff880'20b43b88 00000000 00000000' fffff8a0 ' 05764100 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
  fffff880'20b43ae0 fffff801'89418346: fffff8a0'04069710 00000000'00000000 00000000'00000001 00000000'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
  "fffff880 '20b43b20 fffff801' 890b62a1: fffffa80 ' 196707 c 0 fffff8a0 ' 0b89e6f0 fffff801 ' 8941805 c fffffa80' 16748130: nt! PnpDeviceEventWorker + 0x2ea
  "fffff880 '20b43b80 fffff801' 8904afd9: fffffa80 ' 00180000 00000000 00000080' fffff801 ' b 890, 6160 fffffa80 196707 c 0: nt! ExpWorkerThread + 0 x 142
  fffff880 '20b43c10 fffff801' 890ff7e6: fffff880 ' 00a 82180 fffffa80 ' 196707 c 0 fffffa80 ' 06741b 00 fffffa80' 06765940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'20b43c60 00000000' 00000000: fffff880 '20b 44000 fffff880' 20b3e000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  We can see the various routine calls BTHUSB Device bthport.sys (Bus Bluetooth driver) who then finally enter various before btmhsf.sys some error checking.

  btmhsf.sys is the Intel Proset Bluetooth HighSpeed filter driver and probably the culprit here. Update this driver ASAP - http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr
  or uninstall it if you do not plan to use BlueTooth.

  ---------------------------------------------------------------------

  If after doing the above, you are still blocked, remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  In addition, to answer your question as to why the MEMORY. DPM is so important because it's a dump of memory rather than a small kernel. Kernel memory dumps contain all the kernel memory was working with and that was in use at the time of the accident, that is why it is larger and provides much more information.

  Kind regards

  Patrick

• Windows 7 blue screen: DRIVER_POWER_STATE_FAILURE STOP: 0x0000009f (0 x 00000003,... ntkrnlpa.exe)

  Hi all

  I got a blue screen today with my Windows 7 which is something disappointing and I don't want to do it again, can someone check the dump for me file and tell me what is the cause?

  ********************************************************************************
  The problem seems to be caused by the following file: ntkrnlpa.exe

  DRIVER_POWER_STATE_FAILURE

  Technical information:

  STOP: 0X0000009F (0 X 00000003, 0X8903B458, 0X83133AE0, 0X88B16008)

  Ntkrnlpa.exe - address 0x830eaf1c base at 0x8300c000 DateStamp 0x4f5583be

  ********************************************************************************

  I have:

  Intel i5 760
  4 GB of ram
  Windows 7 32 bit
  Comodo 5.10.228257.2253
  NOD32 4.2.71.2

  In case there is something wireless (I read something on this, but not sure!), I have:

  Device USB of TP-link wireless (& TP-link utility)
  SecurityKISS tunnel software
  proXPN vpn software

  Drivers:
  Microsoft virtual Wifi Miniport adaprot
  Realtek PCIe GBE controller (disabled)
  TP - LINK 150Mbps Wireless N adapter Lite
  Unknown device
  TP - LINK 150Mbps Wireless N adapter Lite

  VirtualBox has been running a win XP version that has Avast & Comodo

  At the point of issue, virtualbox was operating in full screen, Firefox open and no one to the PC (no action)

  I downloaded the dump file to:
  http://DepositFiles.com/files/q4ebw15vb
  Password: win7win

  Thank you

  Hello

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Disconnect all external devices except your mouse and your keyboard and check what is happening.

  Method 2:

  Step 1: Login to the Safe Mode and then check if it helps.

  Start your computer in safe mode

  Step 2: Perform a clean boot Hardware and a software clean boot, and then check if it helps.

  (a) click "Start" and type "DEVMGMT. MSC"in the search text box and press enter

  (b) develop "audio, video and game controllers".

  (c) right click on your sound card, select "Properties".

  (d) 'Pilot' click, click Disable the selected device. Click OK

  (e) Please use the same method to disable other devices such as: Modem, network card, CD - R drive. Please note that some devices such as the video card are not available should be disabled.

  (f) Please restart the computer.

  Note: do not forget to activate the devices to return after you complete your troubleshooting.

  Method 3: You can also check out the link and then check if it helps.

  Resolve stop (blue screen) error in Windows 7

• Receiving intermittent crashes and blue screens

  Original title: blue screen of death

  I built my computer and have intermittent crashes/blue receintly screens.

  When I boot back I get this error message:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 1a

  BCP1: 0000000000041201

  BCP2: FFFFF68000007000

  BCP3: 95A000300E17F847

  BCP4: FFFFFA80043101A0

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  He tells me to check the for more info .dmp file, but I can't open the file.

  Hello

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -------------------------------------------------------------

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Processor	Name of the computer	Number of processors	Major version	Minor version
  090310 19983 - 01.dmp	03/09/2010-12:35:40 AM	PAGE_FAULT_IN_NONPAGED_AREA	0 x 00000050	fffffa81'80e63b3b	00000000 00000000'	fffff800'02ce75ff	00000000'00000005	Ntoskrnl.exe	Ntoskrnl.exe + 70740	NT kernel & system	Microsoft® Windows® operating system	Microsoft Corporation	x 64		4	15	7600

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter above for pilots and memory.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DRIVER_POWER_STATE_FAILURE 00000000'00000003

  Hi all

  I try everything I install windows 7 and 8 and 8.1 same problem I try to also update same driver problem

  Toshiba L50T-A

  I think that this problem of material

  DRIVER_POWER_STATE_FAILURE ntoskrnl.exe

  DRIVER_POWER_STATE_FAILURE 00000000'00000003

  101413 58187 - 01.dmp 14/10/2013-09:43:06 00000000'00000003 ffffe000 "013b01c0 fffff801" 0x0000009f DRIVER_POWER_STATE_FAILURE 546e5960 ffffe000'00f9ec50 ntoskrnl.exe ntoskrnl.exe + 1500 has a 1500 0 C:\Windows\Minidump\101413-58187-01.dmp 9600 + 0 x 64 ntoskrnl.exe 15 8 1 043 760 10/14/2013 09:45:02

  dumfiles

  https://SkyDrive.live.com/redir?RESID=18BA779B1B55F962! 3306 & authkey =! AKzuMlPiUWHvjOs

  Info

  https://SkyDrive.live.com/redir?RESID=18BA779B1B55F962! 3307 & authkey =! AAhN15P5WE0sAqQ

  Hello

  Please follow my recommendation above and activate the driver verifier.

  Kind regards

  Patrick

• Error on blue screen DRIVER_POWER_STATE_FAILURE

  Whenever I try to play a game, my computer hangs and goes the BSOD, DRIVER_POWER_STATE_FAILURE, fifteen minutes by playing 'Minecraft', I don't know how to solve this problem. I have the files of dump, according to me, if that would help. I'm not completely sure how to access it.

  Can someone help me solve this problem?

  Hello

  Well it is possible but just not very likely.

  Since it is a laptop, I think the main problem of the lack of power in
  the video device.

  Rob - SpiritX

• Problem event name: BlueScreen 0x3b

  original title: problem event name: BlueScreen___OS Version: 6.1.7600.2.0.0.256.1___Locale ID: 1033

  Hello!

  I have problems whit my OS. I did a fresh install of win 7 64 bit and new same problem.

  After 4-5 hours does not when I start the comp I always get blue screen MSG HELPPP

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: 3B

  BCP1: 00000000C 0000005

  BCP2: FFFFF80002BDB4A1

  BCP3: FFFFF880059D2FC0

  BCP4: 0000000000000000

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\020911-27268-01.dmp

  C:\Users\Proba\AppData\Local\Temp\WER-38423-0.SysData.XML

  Read our privacy statement online:

   

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  In the observer of blue screen it saids

  caused by the driver: ntoskrnl.exe

  caused by the address: ntoskrnl.exe + 70740

  Signature of the problem:

  Hi Jaaa,

  1. What is the number of brand and model of the PC?

  2. have you activated your Windows version?

  3. ensure that all external devices are connected to the system?

  Step 1:

  If this isn't the case, you can try to activate and validate the product.

  Check out the link:

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Windows validation

  http://www.Microsoft.com/genuine/validate/validatenow.aspx

  Step 2:

  You can start the system in safe mode and check.

  See the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 3:

  You can also check in the manufacturer's Web site to see if you have updates available (Basic Input\Output System) BIOS. Log in the website to check the same.

  Note: the BIOS update can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Randomly - blue screen BCCODE - 1A - help

  original title: random BSOD - BCCODE - 1A - help

  Hello

  Im getting random bluscreen of questions on my asus laptop. The dmp file produced by windows includes the following information:

  Bug Check String: MEMORY_MANAGEMENT

  Bug check code: 0 x 0000001 has

  Caused by the driver: ntoskrnl.exe

  Caused by the address: ntoskrnl.exe + 70740

  Operating system: Windows 7 (x 64)

  CPU: x 64

  Can you give me a hint on what could be the problem?

  Tanks in advance for your support.

  Hello

  Might want to take a look at the slot the wire going through the same problems as you:

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/71ae0ae9-EC94-4620-9708-65a2ff2f20aa

• BSOD ntoskrnl.exe + 72 0x0000009f DRIVER_POWER_STATE_FAILURE has 40

  I almost brand new HP ProBOOK 450 G2 with Windows 7 Enterprise, just noticed today the first Memory Dump, thought then to ask... like the laptop is under warranty... laptop computer is on battery power and the battery is dead so saw the light flashing 'orange' and he got the memory dump and he came down, the battery was finished It happened... but its still not the right way to go then... I have through the app "BlueScreenView" about something, but he could not say exactly... searched thing many error BSOD here in the office, but none had the same error, sharing so if someone is kind enough to help.

  Dump file 050415-21028 - 01.dmp
  Time of the accident 04/05/2015-11:01:32
  Bug Check String DRIVER_POWER_STATE_FAILURE
  Bug check code 0x0000009f
  Parameter 1 00000000'00000003
  Parameter 2 fffffa80'07f37a10
  Parameter 3 fffff800'048943 d 8
  Parameter 4 fffffa80'08da0010
  Caused by the driver Ntoskrnl.exe
  Caused by the address ntoskrnl.exe + 72 has 40

  DMP file: http://1drv.ms/1K9FKRC

  Thanks in advance

  ONE

  This phenomenon was related to rtlane.sys NDIS Driver of Realtek Semiconductor Corporation.  I remove the current driver and install the latest driver available.

• DRIVER_POWER_STATE_FAILURE ntoskrnl.exe e58d2

  I'm the blockages of the system and this is the error I get: driver_power_state_failure ntoskrnl.exe e58d2

  Here is a paste of bluescreenview log:

  ==================================================
  Dump file: 111914-29234 - 01.dmp
  Crash time: 19/11/2014-15:39:27
  Bug Check String: DRIVER_POWER_STATE_FAILURE
  Bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'07581680
  Parameter 3: fffff800'04895748
  Parameter 4: fffffa80 12854 c. 60
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\111914-29234-01.dmp
  Number of processors: 8
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 1 475 032
  Dump of file time: 19/11/2014-15:41:49
  ==================================================

  Someone has an idea of what is causing this crash? Let me know what I can provide. I'm stumped on this one.

  Shaun

  I don't know your config so can suggest only you remove the current driver and then install a new one without having to reboot.  You can also contact the computer manufacturer for information about the procedure to update.

• DRIVER_POWER_STATE_FAILURE - 0x0000009f - ntoskrnl.exe

  I am facing to the BSOD a couple times a day. Each time the blue screen appears the laptop shows "DRIVER_POWER_STATE_FAILURE" then restarts again, once rebooted everything looks normal as usual.
  The system is Windows 8, X 64. The properties of the dmp is illustrated below:
  Chain: DRIVER_POWER_STATE_FAILURE checking bug
  The bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'04df9880
  Parameter 3: fffff803'fc5d2b40
  Parameter 4: fffffa80'05ad4290
  Plant address: ntoskrnl.exe + 5 has 440
  And my minidump link is
  https://SkyDrive.live.com/redir?RESID=F8ACA593B484724A! 1437 & authkey =! AI3q_oKn6TnvVOQ

  Hello

  The attached file of the DMP is to bug checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  If we run one! IRP on the 4th parameter of the bug check (IRP address blocked), we get the following:

  > [16, 2] e1 0 fffffa8006d36040 fffff803fd551830-fffffa800a43e690 00000000 success error cancel pending
  \Driver\nvlddmkm nt! PopRequestCompletion
  
  nvlddmkm nvlddmkm.sys = which is the video driver nVidia.

  Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  Kind regards

  Patrick