Receiving intermittent crashes and blue screens

Similar Questions

• Satellite Pro L510 - crashes and blue screen

  Hello
  I am a new user of the Toshiba Satellite Pro L510, since last September, barely 3 months.
  Recently, had met 2 crashes (2nd is today s). As it happened today, there are blue screen that appears, which included messages like 'crash', 'written' physical memory... etc.

  In addition to send it for repair for this new laptop, I don't know what is the best way to manage this accident and what might be the best way to prevent this accident.

  Recently I installed programs such as Microsoft SQL Server 2008, anti-virus program (Sophos), which I think are necessary (the first was for my studies as well).

  Would appreciate any pointers to advise me if these could be the causes of the accident, and that I have to do to keep the better laptop or y at - it any generic deficiency maybe I should take notes.

  Thanks in advance for any advice for this laptop.
  Kind regards

  Hey,.

  First of all, I must say it is very difficult to say whether this problem is software or hardware related, but in most cases these accidents are caused by software or drivers...

  I put t know how many programs you have installed, what OS you use and if there are compatibility problems, but you can test it yourself: Toshiba start recovery disc recovery facility. After that, you have the same settings that you have purchased.

  You should examine it a little these parameters. If everything is ok, it was just a problem software or driver. ;)

• conmputer crashes and blue screen appears and the computer restarts

  my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

  If you reinstalled Windows, then you can be sure that it is hardware related.

  The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
  Neil
  www.nwarwick.co.UK

• Satellite A500 - crackling sounds and blue screen

  Hey everybody.

  I bought a laptop Toshiba Satellite A500-19w about 4 days ago (today it is Sunday, March 7, 2010).

  I had the sounds of crackling of my speakers which have been mentioned so many times in the forums, no real solution.
  I also experienced the crash of the blue screen, that's already happened 7 times while I was not strongly using my newly buy laptop.
  I'm not looking for a repair or a replacement, because I find it quite unacceptable to have to think about the errors, faults & fixes as much as the laptop is brand new.

  What I want is a refund, but I'm not sure on how to do it.

  I know that Toshiba has some sort of refund policy, but if someone can tell me exactly how it works, because I want to get rid of my laptop as soon as possible (I will not buy any more portable Toshiba, especially since I had some similar problems with my Qosmio f30).
  If someone can give me some guidance, because I don't want to be mocked or used and cheated out of refund.
  I bought my Toshiba in the Middle East (perhaps refund policies are different here).
  Thank you.

  Post edited by: mihran

  Hi mihran.

  If you want to pay off your laptop, you should talk with your computer store where you bought it. Only the can repay your laptop and not Toshiba directly.
  Of course it is also depending on the country where you life, but normally you can pay within 14 days I think. So in your case I speak with the seller or give them a call. They explain how to do this.

  But let me give you a little advice: regarding your problems with the crackling sound and blue screen I recommend that you contact an authorized service provider or ask a new A500 (this should be possible if you have only 4 days). Generally, I can say that a friend of mine has Satellite A500 and he is quite satisfied with her. This laptop has a great design equipped with new material for a good price. :)

• Re: Can't do and blue screen with the recovery tool

  Hello

  After I start my computer, leaving the office, but I can't do anything, everything freezes!

  I tried the recovery (with F8) tool and it starts, but after a while the bluescreen apears.

  Can someone tell me what is the problem?

  Thank you

  Hey,.

  What laptop, you have exactly and blue screen appears exactly?

  If disk HARD recovery doesn't work you should try the Toshiba Recovery disk recovery facility.

• Cannot install windows - MEMORY_MANAGEMENT exception and blue screen

  Hello

  IM unable to install windows on my laptop computer, because whenever I try to install it, after installation there is exception MEMORY_MANAGEMENT and blue screen. It all started since a few exceptions on my previous windows which gives began several exceptions like DRIVER_IRQL_NOT_LESS_OR_EQUAL as errors and PC rebooted each time. Then I thought to install new windows and the problem started. I'll be very grateful if you look forward to my problem

  Thanks :)

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  (1) If you do not know your readers make / model number AND your computer is no longer able to load Windows:
  (a) Renmove the drive of your desktop and check the label for the serial number and model.
  (b) remove the bottom cover of your laptop, remove the disc and check the label for the serial number and model.

  (2) If Windows is still usable, install 'Speccy', it provides information of the computer/system in detail on your:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test drive - create a Bootable CD:
  (or connect the drive to anther PC and install the appropriate test software)

  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.

  List the factory utilities, walk.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital disks, download the file .iso from WdDiag:
  http://support.wdc.com/product/download.asp?GroupId=613&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also try Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD - modified software: 24/10/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  PNY support: http://www.pny.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html
  Samsung Magican review:
  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  J W Stuart: http://www.pagestart.com

• HP elite e9160f had compatible windows error/process stop notice and blue screen freezes.

  HP e9160f Vista Home Premium running is compatible notice of error switch Windows and blue screen freezes.  Any suggestions?

  I went ahead and ran the HP disks to reset to the factory settings and loaded Windows 7.  No problems now!  Thank you for your help and persistence.

• HP ProBook G2 450: get crash with blue screen ((rtwlane.sys) driver_irql_not_less_or_equal message

  When I use internet through Wi - Fi some message crash put in time with blue screen (driver_irql_not_less_or_equal (rtwlane.sys), my adapter Wi - Fi is Realtek RTL8723BE 802.11bgn (new version) how can I solve this problem? please help me...)

  Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers

  By downloading, you accept the terms and conditions of the license agreement for the HP software.
  Note: Some software requires a valid warranty, current support contract HP or a fee.

  Type:	Driver - network
  Version:	2023.9.401.2015 Rev.A (21 may 2015)
  System:	Microsoft Windows 8.1 (64-bit) | See all
  Name of the file:	sp71432.exe (35 MB)

• Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

  Hi, I think I might have a virus.  Here are the symptoms:

  • I can't activate the automatic updates
  • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
  • I was able to run a quick scan of the Scanner for MS without problem.
  • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
  • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
  • I ran a chkdsk /r and no errors not found on my hard drive

  I searched the internet and I tried a few suggestions, but so far I have not made progress.

  I am running XP SP3 and I don't remember disabling the automatic updates.

  I am open to any suggestions, just some guidelines at this stage.

  Hello

  ·         What exactly happens when you try to activate the automatic update?

  ·         You receive no error message from error code?

  I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

   

  Note: The article also applies to Windows XP service pack 3.

  Let us know if it helps.

• VAIO will not boot xp. Crashes with blue screen error.

  VAIO will not boot xp.

  Sony Vaio PCG - 691L
  XP, installed at the factory has SP3 update.

  .5gig ram

  I worked on the machine to get to start XP. Sometimes it will boot in Safe Mode, but most of the time (and when it does not start in 'normal' mode), it crashes with a blue screen. The blue screen flashes fast to read, and then the machine tries to restart.
  Once I do start safe mode and got WIndows update but can't update due to the update that needs to be in normal mode.
  I was able to install Malwarebytes and a full scan. Also installed Spybot S & D and performed a full scan.

  When it does not start in normal mode it is slow, very slow. I tried rkill and it causes the machine down.

  It starts in normal mode today, but it crashed before I can get open IE and go to the windows update.

  Help...

  Thank you

  Rick

  Tired of playing with this. Re-install xp.

  Thank you...

• NTFS.sys crash causing blue screen?

  Hello

  I get this crash blue screen for few days now randomly. Don't know what the problem where the reason why I'm here.
  I provided a dump log file, so I hope you can shed some light on the question. Please help me :(
  Spike
  Dump file: Mini012912 - 01.dmp

  Crash time: 29/01/2012-12:33:07 AM

  Bug Check String: NTFS_FILE_SYSTEM

  Bug check Code: 0 x 00000024

  Parameter 1: 0x001904aa

  Parameter 2: 0xb52299e0

  Parameter 3: 0xb52296dc

  Parameter 4: 0x8801172d

  Caused by the driver: Ntfs.sys

  Caused by the address: Ntfs.sys + 572d

  Description of the file: NT File System Driver

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 6.0.6000.16386 (vista_rtm.061101 - 2205)

  Processor: 32-bit

  Plant address: ntkrnlpa.exe + cdb3f

  Stack address 1: Ntfs.sys + 19fff

  Stack address 2: Ntfs.sys + 17976

  Battery 3 address: ntkrnlpa.exe + ad218

  Computer name:

  Full path: C:\Windows\Minidump\Mini012912-01.dmp

  Number of processors: 2

  Main version: 15

  Minor Version: 6002

  Size of the dump file: 198 544

  Share with everyone - others more savvy I can watch it. It increases the chances of getting a solution.

  Name the folder and change the permissions to share with the person concerned.

  Important note : You can share the file with anyone if there is no private/sensitive information (for example the screenshot of a prompt error message). For so and so, just select the option "Everyone (Public)" in the share with"" checkbox. Please refer to the following screenshot:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Crash dump blue screen

  OK lets see if I can do it,

  I've been on the problems of Validation of Windows Vista (Windows Vista) for the last days solve a real copy not question. Thought I had solved it and I haven't mentioned the BSOD for them and the planned bridge me to you. This is the last post I gave them. I spoke with Christmas D Paton

  I put my computer in mode sleep before you go to bed.

  I woke up Tuesday morning, open my computer, everything was great, I was down for about 5-10 minutes until a blue screen appeared (it appeared before, a lot of time) which had some information that I did not understand, except that my computer is shut down to avoid damage and it was a crash dump and then it was backwards and to communicate with someone (I don't remember who they said to contact).

  The time before I moved and manually shut down my computer, and of course a display lights to start normally, so I have therefore, everything starts fine and I go on my merry way.

  But there was times that he would get into some kind of repair mode and it would be through its thing and reboot again, then we could find until the next time.

  in any case, this morning, when I turned it off manually, it was strange, he was going through a few numbers on a black screen and went through a thing of repair, it took about 15 minutes (which seemed to me in the long run, could did previously and diddn t take too long) so I liquidated. and restarted. Then I restarted (this is the part that is a little unclear to me). I think that when he started he was a diagnosis and ask me if I wanted to restore it to a previous date (I think I had no choice, so I have done and who has when everything on my desktop has changed and there were things out there that I had deleted and long time age and a background photo that I put om here 3 days ago weird.

  I'm sure there may be other details that I don't remember, I hope that gives you some information. a few questions you would ask you could create a memory.

  Thank you

  Now, last nite I put my computer in mode 'sleep' and are awake wth the screen... then a few seconds later the blue screen came new and I manually turn off and it started late and returned empty again.and the blue screen... now it turn on at all.   I'm om now my husbands laptop (thank God I only)

  Glad to see things work better.

  I wouldn't recommend any product that is supposed to speed up the PC, or any other program that cleans up the registry that these programs can do more harm than good.

• Windows Vista crashes with blue screen

  My computer dell laptop crashed with the blue screen.

  I tried to restart and log in on my windows account. As you move the cursor to enter my password, it crashes every time.

  That's why I tried to reinstall windows Vista by using the dell windows vista installation disc provided with the laptop. Everything went well, but in the end, it came with the message "Windows could not update registry data in the installation."

  Hello

  Check with Dell Support, their drivers and documentation online and ask in the Dell forums for known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ==========

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Vista sp2 crash with blue screen

  I loaded on my hp Pavilion dv6000 vista sp2 and it works very well for a few minutes, but then it crashes with showed a blue screen with something written on it and its too fast to be read

  Steevencorneil,

  In the control panel choose reports on problems and Solutions ( problem in the START search box type), go to historical problem, right click on your error and choose check for the Solution. You can also examine the details.

  In administrative tools choose reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can perform a clean boot to determine if background programs interfere with your game or program

  http://support.Microsoft.com/kb/331796 >

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135>

  06/12 / 1110:21: 43 am

• How to escape on IP4 PXE boot and blue screen password for Dummies

  every time I have start or restart I have to enter the password in the blue screen and it starts from PXE, how I can escape these two things, everyone wants to charge me $150 I am a senior on a fixed income and put a little technological challenge

  bonnell_kevin,

  Start the computer and start receiving the F2 key to enter the system setup/bios screens.

  Once in the bios, you can arrow over the BOOT screen there is a first, second and third boot device. Scroll down and use the arrow keys or the keys to make more or less the main hard drive the first boot device. If you read at the bottom of this screen, you will see what keys are used to make the hard the first boot device. Once you have the value HD 1st boot device, press the F10 screen to save the changes and exit.