NULL zone object / use the space bar to navigate the timeline

Similar Questions

• Moving an object using the arrow keys

  I think I've changed the default distance to move an object using the arrow keys of 1 Point (1/72 inch). Can you help me change the default or tell me how to set the distance you can move an object such as a text field using the arrow keys. Thank you.

  It is based on your grid interval setting in the drawing AIDS palette. For a grid of 1 point, you would need apart 12/pc (although it says the points of the grid is picas, points 12-pica).

  I find 1 point too fine, I use a grid of 4/pc (3 points) and I have all my subject base around multiples of 3 measurements.

• [Cp] Select object on the timeline and move it on the slide with the cursor keys?

  Hello

  I don't know if there is a shortcut for this:

  Sometimes it is easier to select an object in the timeline, but if you try to use the cursor keys to move, you move IN the timeline panel.

  Is it possible to move to the slide edition?

  Thank you.

  PJ

  I just found the answer:

  -Click on the layer in the timeline of the object

  -move the mouse over the object on the slide: you can move with the cursor keys.

• Using the timeline in direct access to scenes

  I use the timeline to build a scene selection menu. This works. I want to make is that at the end of the never chapter he'll be back in the scene selection menu instead of just skip to the next chapter. So that the user has the opportunity to watch the entire timeline or go to the chapter selection and stage shows as they wish.

  Create a playlist "chapter" with one chapter for each of the chapters. The button in the scene selection menu goes to a chapter selection, not to the chapter itself. Set the action to end on each chapter of playlist to "return to the last menu." The chapters of the scenario will have NO end action.

  If you make a bluray, it will work in CS6, not before.

• Is it possible to look at the code generated using the timeline?

  I'm sitting here grumbling because my super-easy slideshow look right and I know that if I used the tools of design/timeline, would be perfect.  The only problem is, I want to load my images using an XML file and the only way I know to do is to go strictly code.  Is it possible for me to do the interpolation using the timeline and view the code that generates lightning to start the slide show.  It would be a very useful learning tool.

  Create your pre-teen.  Right-click on one of the tween frames and click on copy movement in as3 and paste the code to inspect or use.

• How to access the Non-space data of the object using the API of the HTML5

  Using the Oracle cards HTML5 API, is it possible to access the data an excerpt when generating a map?

  For example, my database has a table named ITEMS:

  Table: ELEMENTS

  COL_A

  COL_B

  COL_C

  COL_D

  COL_E

  COL_F

  GEOMETRY

  This table contains a number of objects point.  With the help of Mapviewer, I can successfully create a map by using the HTML5 API.  Here is an example of how I used the constructor 'OM.layer.VectorLayer.TYPE_JDBC' to retrieve the objects point of my database.

  pointLayer = new OM.layer.VectorLayer ("PointLayer",

  {

  infoWindow: true,

  def:

  {

  type: OM.layer.VectorLayer.TYPE_JDBC,.

  dataSource: "myDatabase",.

  SQL: "SELECT * FROM POINT."

  geometryColumn: "GEOMETRY."

  labelColumn: "COL_A."

  loadOnDemand: false,

  URL: baseURL

  },

  renderingStyle: circleMarker

  });

  How can I use the HTML5 API to access the data in the other columns (COL_A, COL_B, etc.) of my table?

  I know that the methods DisplayInfoWindow() and displayTabbedInfoWindow of the Map class to view this information by clicking on a specific point on the map.  But I would like to have access to all the points to create a table below my map showing all points (and their data) shown on the map.

  Hello

  You can try this code:

  functions var = pointLayer.getAllFeatures ();

  for (var i = 0; i)

  {

  Features [i]. GetAttributes() ["COL_A"];

  Features [i]. GetAttributes() ["COL_B"];

  ......

  }

• How to know the DB objects using the particular storage space

  Hi all
  
  I have a tablespace that is used by different database objects.
  I want to know what objects use this tablespace.
  How I know this?
  
  
  
  Thank you

  I have a tablespace that is used by different database objects.
  I want to know what objects use this tablespace.
  How I know this?

  Select nom_segment, nom_tablespace, segment_type, owner of dba_segments where nom_tablespace ='&TBS';

• Iterate through rows in the object using the pageflowscope variable view

  I'm looking for a way to browse multiple lines of a view object and the transaction using a variable that is stored in a variable pageflowscope programmatically.

  I have two view objects that have a relationship of the master / detail.  The jsf page ADF Master table secondary table created by the control of data objects. The requirement is to have a single button that when pressed will update all the selected record of the master detail records.  One of the operations that must be done is a value that is stored in a variable PageFlowScope.

  The approach adopted to accomplish this was based on the following video:

  ADF Insider Essentials: Iteration through rows in a view object programmatically

  Author: Grant Ronald

  Link: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/IterateRows/IterateRows.html

  I created the Classes of line of sight for the two display objects and developed the method for updating the lines (code below).  The method that takes no parameters, has been added as a tool bar button to the page and works as expected when you use a hardcoded value.  I would add a second update statement in the while loop to update another column, but using the value of the variable PageFlowScope is stored a previous view in the taskflow.

  I thought I'd be able to use AdfFacesContext.getCurrentInstance () .getPageFlowScope().get("objectid") to get the value but I get a warning in the source editor, 'this guy or a variable 'AdfFacesContext' not found. "

  How can I do this?

  JDeveloper Studio Edition Version 11.1.2.4.0

  METHOD CODE:

  /**

  * Method to update the tool work order status

  */

  public void checkInTools() {}

  All lines wor (RowSet) = getWOToolAsg ();

  While (wor.hasNext ()) {}

  CurrentRow = (WOToolAsgVORowImpl) wor.next () WOToolAsgVORowImpl;

  currentRow.setToolActive("Y");

  Add code here to get OpNmb of pagescope variable and update record in table - type String

  }

  }

  Thank you.

  Scott

  You must import the class to use.

  Import oracle.adf.view.rich.context.AdfFacesContext;

  AdfFacesContext (Java QAnywhere for Oracle ADF Faces)

• Script not running task for all objects using the Get-Content cmdlet

  Hello

  For some reason when I run the code following the newspaper bundles are only being dumped for the first host in the hosts.txt file. I have a script that gets the bundles of paper for all hosts in a cluster and rename the cryptic file name to reflect the name of the host with good Luc. I could just use the script to get the beams to all hosts in the cluster, but there are times where I need just one or two hosts in the cluster. Can someone tell me what is the problem with the code below?

  $VC = Read-Host "Enter name vCenter.
  $varHost = get-Content "S:\Get-Logs\hosts.txt".

  ##Connect to VCenter
  SE connect-VIServer $VC - WarningAction SilentlyContinue
  #----------------------------------------------------

  
  {foreach ($ESX to $varHost)

  $destPath = 'S:\Get-Logs\Logs\$($ESX) ".
  
  If ((New-Item-chemin $destPath-ItemType répertoire-ErrorAction SilentlyContinue) - eq $null)
  {- New - path $destPath - directory - ErrorAction SilentlyContinue ItemType}

  Get - Log - VMHost $ESX - Bundle - DestinationPath $destPath

  
  }

  
  # Disconnect - VIServer
  Disconnect-VIServer *-confirm: $false
  The Script ##End

  Although it would be ideal for the log files should be renamed at this point I would be happy if the script would create a folder for each host listed in the text file and place the log file in each folder.

  Thank you

  The variable $ESX contains only a string, not a Name property.

  If you are referencing $ESX. Name will return nothing

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• Cannot deform stuck HAVE dynamic object using the free transform vector in PS CS6

  Hello

  I stuck a vector object in PS CS6 (13.0.1 x 32) today directly from Illustrator CS6 (16.0.1 x 32) and select 'Paste as smart object' (Windows XP Pro SP3).

  I then tried to distort the object glued using the free transform tool by dragging one of the handles to angle with hold CTRL (Windows).

  General warps\distorts the object, but instead, it launched an operation to bias .

  If I paste as Pixels or shape layer and then apply free Transform, < Ctrl + corner handle slide > performs a warp\distort operation.

  Also, if I have rasterized glued it opposed and then convert them to a smart object, I can warp\distort.

  Is it not possible to paste a vector Illustrator in as a smart object, then warp\distort directly using this technique?

  Thanks for your help.

  Richard

  Your right because on a stuck vehicle a smart cannot deform, false or perform perspective transformations.

  One solution would be to right click on the vector smart object layer in the layers panel and

  Choose Convert to smart object.

  It depends on what is your object, you would probably better quality of a pasted shape or path, but then you will not be able to open the object

  back in illustrator from photoshop.

• Why can I not select an object using the direct Selection tool?

  PHOTOSHOP: I have an ellipse I have rasterized. Why can I not use the direct selection on it?

  The direct Selection tool is designed for use of vector path.

  If you want to use the tool, you can get your selection by going to the Panel traced and clicking the work path make the symbol at the bottom of the Panel, a path

  Then, if you choose, you can click the load path as a selection symbol to return to the moving dotted line (rasterized).

• Cannot move objects in the timeline - imported file from v1.0 to v2.0

  I imported a large file of Captivate 1.0 and tried to move a calendar object. None of the deadlines are locked, but I can't move anything. When I try to move something, the CPU goes to 100% for a while before anything NOT be PAST.
  
  So I have a file Captivate that I can't use in 2.0.
  
  Furthermore, it is my first day using the "upgrade". I'm not impressed so far.

  Good luck benhenny - looks like I can't help you.

• Lock object in the timeline?

  I wish that my purpose to stay where it is in the timeline panel, but when I lay down the duration of the slide, the object sticks to END slide.  Locking is not working.  Any ideas?

  Do you see a red triangle at the end of the chronology of the object? This means that this end is locked at the end of the chronology of the slide. Need to get rid of by moving the rear end, which can be done with the shortcut key (Shift-left) or by dragging them.

• rearrange the depth of objects on the timeline

  is it possible to have objects to change levels while the timeline moves?

  in other words, I have five sovereign wealth funds, which are defined to extend and different intervals. When one increases its size, it overlaps the other. Then, it reduced its size to the original size. the second then expands and overlaps the third, etc.

  How can I get object number one on top while it animates, then get the two object to change to the next level when he hosted, etc.?

  I hope I have not confused the crap out of everyone. It's hard to describe.

  Thank you

  Van

  Hello

  I don't think this will be possible on the same blade, you must distribute across multiple slides to simulate the desired behavior. You're talking about the SWF file: hear you inserted the animations on the slide?

  Lilybiri