Number of component snap for recording audio in first

Similar Questions

• Hi I was told to come to the support with the error number 16... for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi, I got to come to the support with the error number 16. for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi Omid,

  Please see the below help document to fix the error 16:

  Configuration error 16. CC, CS

  If the problem persists, please contact support:

  Contact the customer service

  Kind regards

  Sheena

• Any way to record Audio narration first and then video then?

  I think it's a better workflow (and ends up being faster than both both audio and recording after). We found another program that will allow us to do (but that has fewer features than Captivate).

  Our work will not spring for the two so we're throwing on the workflow functions (unless someone knows how do - hopefully its really obvious and I were just being dumb).

  I know that in the past, people have used the notes in a PowerPoint slide - just seems weird, you can't do it for other types of video recording and demos.

  Any ideas?

  Scaffolding is a pedagogical concept in education. This is a pretty good explanation (even just the first paragraph): http://edglossary.org/scaffolding/

  Scaffolding of process (and providing limitation or restriction) can be a good way to ensure a higher quality end product. If you use a software like Adobe voice he had built scaffolding process and restrictions. First you choose a structure (who made suggestions on what should cover each slide), and then you save the audio (never longer than ten seconds at a time) and then you adjust your layout and then you choose icons or images or text you sort your music and then you go through and then you export (and adjust export credits and titles). This is a truncated version of the film process that will guide you to make a better product. It's (one of the reasons) for which voice projects come out much more pleasant and the profession you could do on other software. You could do the same thing with PowerPoint, but you would use copious workaround solutions to get your content and PowerPoint does not provide you with this scaffolding as well, even as the most talented producers still fighting produce something better than a typical project of the voice.

  I'm not fussed on the subject all beings in a single product. I use the product adobe for over 15 years now - I can switch between programs that respond to different tasks. The real reason, I can't use both, it's that my work won't pay for two software which have similar results. If Captivate could do screencast-o-matic can do (without the workaround solutions), it would be a simple choice to go with Captivate. It would be even to be in the Captivate program - it could be in a sister program available with package of Captivate. The same way After Effects and first compliment.

  Now, it seems Captivate has more functions, but an integrated of any process which means that we will probably just stick with Screencast-O-Matic.

  What I want to really, it is on Adobe to take the understanding of theories and teaching that they applied to the voice and slate and apply that Captivate (or a program that is packaged in a purchase of Captivate). I think it's weird that they have not yet...

• Sound Recorder-how do for editing audio files

  Sound recorder

  Let's say that I accidentally left the sound recorder continue to save in the next song for a few seconds, how can I go back and change or delete, this partial song I leave the tower. In other words, I recorded the song I wanted, successfully but left the sound recorder too long before clicking on "stop recording".

  Hello

  You need editing software.

  Audacity - free
  http://Audacity.sourceforge.NET/

  Free Audio Editor 2010 - free
  http://www.free-audio-editor.com/

  ----------------------------------------

  Audio recording in sound recorder: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a copy of photoshop cs2 (version 9) and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  I have a copy of photoshop 9 and I am not able to record by phone or the Internet.  Is there a number I can contact for this?

  CS2 disabling servers have been arrested, but a version of the program is available for users like you

  Read and follow the directions here:

  you will need to download the new cs2 version and used the serial number provided.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Why can't I activate an audio track for recording? (It won't let me)

  I want to record VO but PP will not let me...

  On Mac OS X 10.10 Yosemite in system preferences:

  • Audio input is set to C - Media USB Headphone Set (a mic... Alesis usb works fine for VO in Final Cut Pro 7)

  • Output is set to the headphone output port

  In Premiere Pro CC Audio hardware preferences:

  • ASIO hardware is set to 'default input/output system'

  • I also tried "C - Media USB Headphone Set but, also, it does not work.

  • With the 'system by default i/o' selected, matching output is set to "Adobe Desktop Audio" (only option) and shows:

  • "Output integrated: headset 1.

  • "Output integrated: helmet 2.

  • "C - Media USB Headphone Set: left front.

  • "C - Media USB Headphone Set: right front.

  all four of them have a few icons square to the right.

  In order to record the original Version, I first need to "enable track for recording" in the mixer Audio Track. There is no inside or outside points in my calendar and tracks are not locked or solo wouldn't or anything. So why can't just select the audio track I want to use to record the VO? I click on it but there is no answer. I just want to know why this software is not what it was designed to do.

  The track you want to record on must be of the same type as your microphone source - a mono microphone needs a mono track, a stereo microphone needs a stereo track. The track will not enable recording if the source is not appropriate.

  MtD

• the sound card for the Pavilion Slimline S3300T will allow me to record audio from the internet?

  I have a Pavilion Slimline S3300T. KC833AV prod # #ABA. OS vista Home Premium 32 bit.  The sound card will allow me to record audio directly from the internet?

  The sound card is not big thing to do with it, but there are third party software out there that will allow you to do.

  WaveTap is recommended by LifeHacker.

  Here is an article on their website explaining how to use it:

  WavTap Audio recordings of your computer by pressing a keyboard shortcut

• TDM excel 2010 component snap with limitation of 65536 lines.

  Hello

  I installed TDM excel 2010 component snap and have excel 2010 (32-bit version) on my laptop.

  When I open a file PDM with 300000 lines using excel importer of PDM, it will automatically start the excel. But it will display a dialog box saying that the number of rows exceeds the limitation of the program (65536). It confuses me because excel 2010 is supposed to be able to open the data file more than 1 million rows.

  The add-in works great with any TDMS file within the limit of 65536 lines.

  Any thought or idea, let me know, thanks.

  Marco Yu

  Mechatronics Engineer

  BMT WBM

  Hi Marco,.

  CAR refers to the application of Corrective Action. OR use the bug tracking system.

  For this request, we have already begun to investigate. Thanks for reporting the issue!

  Best regards

  Mavis

• How to encode a record Audio of AS3 in PHP

  I am trying to build a way to encode data AS3 audio recording in WAV in PHP. I used a library of WAV in AS3 coders previously, but a record 2 minutes would take 4 to 6 minutes on mobile, depending on the device. So I need to encode to WAV (or any other format that would make usable) in PHP to take the load of the application.

  I have transated this encoder of Thibault Imbert to PHP. See the translation:

  function encode($samples, $channels = 2, $bits = 16, $rate = 44100){
      $data = create($samples);
      $length = strlen($data);
      $bytes = createHeaders($length, $channels, $bits, $rate);
      $bytes .= $data;
      return $bytes;
  }
  
  
  function create($samples) {
      $newBytes = '';
      $bytes = unpack("f*", $samples);
  
      foreach ($bytes as $value) {
          $newBytes .= pack("V*",$value * 0x7FFF);
      }
      return $newBytes;
  }
  
  
  function createHeaders($length, $channels = 2, $bits = 16, $rate = 44100) {
      $RIFF = "RIFF";
      $WAVE = "WAVE";
      $FMT = "fmt ";
      $DATA = "data";
      $header  = '';
      $header .= $RIFF;
      $header .= pack("I*", $length + 44);
      $header .= $WAVE;
      $header .= $FMT;
      $header .= pack("I*", 16);
      $header .= pack("v*", 1);
      $header .= pack("v*", $channels);
      $header .= pack("I*", $rate);
      $header .= pack("I*", ( $rate * $channels * ($bits >> 3)));
      $header .= pack("v*", ($channels * ($bits >> 3)));
      $header .= pack("v*", $bits);
      $header .= $DATA;
      $header .= pack("I*", $length);
      return $header;
  }
  
  

  Which will create a file readable by the right length (if the headers are obviously correct), but there is only silence when it is played. If I change the package size in 'create()' to ' f * ' (instead of unsigned 32-bit little endian int, float), I get static and I can faintly hear the sound in the background. I can't solve this multiplier to clear up the static method, however. (EDIT: before it is mentioned, I know the asterisk is not necessary for most, if not all of the package formats.) It was something that I tried to see if she could fix things and I never removed it)

  The file itself is created as if:

  private function start():void {
            if ( !mic ) {
                      this.mic = Microphone.getMicrophone();
                      this.mic.rate = 44;
                      this.mic.setSilenceLevel( 0, 10000 );
                      this.recording = new ByteArray();
            }
          this.recording.length = 0; //reset byte array in case this is not first recording
            this.mic.addEventListener( SampleDataEvent.SAMPLE_DATA, this.saveSample );
  }
  
  private function saveSample( e:SampleDataEvent ):void {
            while( e.data.bytesAvailable ) {
                      var byte:Number = e.data.readFloat();
                      this.recording.writeFloat( byte );
            }
  }
  
  public function stopRecording():void {
            var file:File = File.applicationStorageDirectory.resolvePath( "audio-recording.wav" );
            this.fs.open( file, FileMode.WRITE );
            this.fs.writeBytes( this.recording );
            this.fs.close();
  }
  

  I'm trying to encode the file is saved in stopRecording(). At this point, I don't know what to do. I tried to translate an other encoder as well, but that seemed to run through the memory as if it was nothing.

  Does anyone have any suggestions as to what is the problem? The two encoders work very well in AS3. Is this a problem with the write file? Problem with writing the audio data in the byte array? Any suggestions will be useful

  So I was unable to find a way to do this via PHP, but I have figure out how do it in a way that is effective and freaking fast in AS3. I realized that the slow fuse of encoding has been a loop in the byte array, read each individual byte, manipulating and write it to another array of bytes. This is an inefficient process, but necessary if you want to ignore the encoder of the recorder. The key was not abstract and rather to encode on the fly, like recording that happens.

  If you record like this:

  private function saveSample( e:SampleDataEvent ):void {
            e.data.position = 0;
            while( e.data.bytesAvailable ) {
                      this.recording.writeShort( e.data.readFloat() * (0x7fff) );
            }
  }
  

  It's the encoding that Thibault Imbert wrote as you do a necessary task (pulling the data from the stream and saving it to a byte array).

  With this, the data is written as it is necessary and sufficient to add the headers to make a WAV file.

  this.recording.position = 0;
  this.recording = this.writeHeaders( this.recording, 1 );
  
  private function writeHeaders( data:ByteArray, channels:int=2, bits:int=16, rate:int=44100 ):ByteArray {
            data.position = 0;
  
            var bytes:ByteArray = new ByteArray();
            bytes.length = 0;
            bytes.endian = Endian.LITTLE_ENDIAN;
  
            bytes.writeUTFBytes( "RIFF" );
            bytes.writeInt( uint( data.length + 44 ) );
            bytes.writeUTFBytes( "WAVE" );
            bytes.writeUTFBytes( "fmt " );
            bytes.writeInt( uint( 16 ) );
            bytes.writeShort( uint( 1 ) );
            bytes.writeShort( channels );
            bytes.writeInt( rate );
            bytes.writeInt( uint( rate * channels * ( bits >> 3 ) ) );
            bytes.writeShort( uint( channels * ( bits >> 3 ) ) );
            bytes.writeShort( bits );
            bytes.writeUTFBytes( "data" );
            bytes.writeInt( data.length );
            bytes.writeBytes( data );
            bytes.position = 0;
            return bytes;
  }
  

  And oila. It's a valid WAV file created without delay after the end of the recording (while I was previously known a delay of 3 times the length of the record on my Nexus 4). I know that's not a very popular topic (Google, Adobe, these forums and StackOverflow were pretty useless to try to solve this problem), but I hope that this solution will help someone along the line.

  EDIT: afterwards, make sure that the ByteArray you save in has its endian Endian.LITTLE_ENDIAN property immediately after instantiation. WAV files require this format and are unreadable if is not set to one.

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• Satellite L500-113 - how to record audio from the Web site?

  I have a L500-113.

  I am the controller program for an Internet radio station and want to record audio streaming from our website. Regardless of the recording software, I can record only since the built in MIC, even if the flow is fortunately playing on my computer. No other recording device is displayed in Device Manager. Surely I can record of built in the card Realtek sound? I installed the latest drivers/Manager Realtek from Toshiba.

  Any help would be appreciated.

  Thank you

  Hi mate

  I think that the laptop supports a Realtek audio chip.
  I have a laptop with the same Realtek audio chip and I can record the audio stream of a Web site.

  I m using a free tool called no. 23 Recorder.
  Google for it and you will find some details!

• Try to record audio only from a small video clip of a digital camera.

  Try to record audio only from a small video clip of a digital camera.

  How to do it on Vista?

  Hi robt1962,

  Thank you for using answers Forum.

  You may be able to use Windows MovieMaker to extract audio from your video file, depending on the format.

  If you use your favorite search engine and look for "extract the audio from video using windows moviemaker" for more details.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I record audio programs that run through Windows 7 on the sound recorder? Where is the master volume.

  How to record audio programs in windows 7? -in previous versions of windows, I could use the main volume control to select "wave" and that way save audio playing on other programs playing through windows and using windows as a simple sampling devicem - I have a relatek 11 hd audio device/card's directx - in audio devices ControlPanel / / / / material/sound/manage / I see only selection of recording for the microphone or line - how can - record sound through windows 7 - can I buy a cable and put it in the headphone and microphone - I'm trying to address the problem in a way that is now not in windows - I want to play things and recording in a small way - could you provide an answer on how audio intgrates of hardware and software with windows - I can't believe really wanting I could do on the previous windows versions - please help

  Start - All Programs - Accessories - Sound Recorder will launch the utility. You can easily find it by running aid and entering "sound recording."

  Right click the speaker icon in the system tray, select recording devices and set the desired default entry.

• How to get Windows 7 Sound Recorder to record audio from the computer?

  I team with my boss and another customer meetings and we want their registered and we use phone calls from Gmail which means that audio is delivered directly through the internet, and Sound Recorder, I found out but I can't record audio only regular computer unless I Plug one wire in the headphone jack that goes to the mic socket who made the impossible phone call since taking mic is already taken.

  I saw in Windows help can I change the source to be recorded, but it lists only microphones (one built into my laptop is default).

  Is there a way to change the entry from the audio recording of the computer?

  My alternative is to find a cable between the MIC and the sound output in order to hear, speak and record at the same time, which I have never seen elsewhere.

  I also do this all the time.  All what I have to do to set up the computer for that is: -.

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set Rec. reading * as default device

  [* the name of your topic in the recording tab may be different - you just choose the entry that is not a micro device]

  Sound recorder will then record sounds coming through the computer.

  - - - - - - - - - - - - - - - - - - - - - - -

  If I ever want to record from the microphone, I need to reverse the above setting by:

  Control Panel, [view by - small icons, if necessary], Sound, recording tab, set the internal mic as default device

  Sound recorder will then record sounds coming through the microphone.