Number pages correctly for books.

Similar Questions

• Hi, I have four images purchased with a license standard Adobe, used for book covers. If I want to use images for other things like mugs, T-shirts and so on, I need a license and how to buy that? "I see an option on my page for.

  Hi, I have four images purchased with a license standard Adobe, used for book covers. If I want to use images for other things like mugs, T-shirts and so on, I need a license and how to buy that? I see an option on my page for the "license again", which is the one to use?

  Hello

  Please see the frequently asked questions, Adobe Stock

  Hope that helps!

  Kind regards

  Sheena

• Hi, I use Apple Photos to create a photo book.  When I export to PDF, photos that are over 2 pages are exported as a single PDF page.  For printing purposes, I want this to export in the form of 2 separate pages.  I did it with iPhoto in

  Hi, I use Apple Photos to create a photo book.  When I export to PDF, photos that are over 2 pages are exported as a single PDF page.  For printing purposes, I want this to export in the form of 2 separate pages.  I did this with iPhoto in the past and this could be something to do with the preferences of Adobe.  I contracted Apple and their export seems thin e (or 2 separate pages). Any ideas?

  If you have not Acrobat is installed, then clearly, it's a matter of Apple having nothing to do with any "setting Adobe." There is nothing we can do at Adobe to help you. Sorry!

  -Dov

• Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?

  Transferred to DPS forum.

  You must configure the pages of appropriately for the target device. For iPad, it is 1024 x 768.

• Order a different number of prints for each image

  If there is a way to order prints of different images different number?

  Say I want to order a print of all my images in a collection of 4 x 6, simple enough.

  Then, I want to order some of them also in format 8 x 10, also quite simple.

  But what I can't find out how to order say;  3 copies of the #4 8 x 10 image, 2 copies of the #5 8 x 10 image and 10 copies of the image #14 in 8 x 10.

  Something I m missing?

  Any help is appreciated.

  Thanks in advance.

  • The options button lets you change the number of prints for each selected photo.
  • The 'add pictures and change print sizes' button allows you to add additional formats and you can even select different amounts for each size.

  See this help page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6e15ea68

  

• find the phone number in the address book

  Hello
  Sometimes I need to search for a phone number in my address book to verify its existence. Is this possible?
  Thank you

  Edit(or AppMenu)/search/search for addresses, enter the numbers as in the photo.

• Firefox suddenly do not load multiple web pages correctly

  I got 4 of Firefox since the release date, but today it acting up - is not loading some Web pages correctly, removing all of the formatting and just put all the text/links/etc in a list along the left side of the window. It is also not displayed pictures of all not more, even if they are all hosted on Photobucket. It's literally ther first time there was a problem with it since the update, and I did not change settings on it at all, so I have no idea why he broke up suddenly. Anyone else get this?

  I've looked everywhere for a solution to this problem; uninstalled ff.; reinstalled FF; Restore my computer; etc, etc, and nothing worked until I found this! Thank you very much!

• rearrange pages in the book photos project

  I started a photo of projects can. fine. But I would like to change the order of pages in the book. & Sliding doesn't seem to work. Or number of the edit page. Is the only way to change the pages to recreate them, and replace the layout and images? ... seems rather tedious.

  Thank you.

  Stood\

  YYou can drag pages around in a book when you're in the "all pages" "layout. Press and hold on a single page at a time, and then drag it to another location.

• How to copy and paste text from the page of the book one photo to another.

  Hello, I downloaded this software 2 days ago, and I had so much fun with it. pls I need help on how to copy and paste text from the page of the book one photo to another. Second, how to copy my photo book completed pages project to another laptop computer for printing. Thank you

  Wow! I solved the first problem, I clicked on 'ctrl c' to copy and "ctrl v" to paste. yipppppeee! now am loving this software d most just need help with the second question now

• I would like to know how to double space on the notebook in a paragraph, how to register and send to another computer and number pages? can anyone help? Thank you!

  Please someone help I'am new to the computer world and I would like to know if anyone out there can help understand me how to double space on the workpad words and how I can save and send it to another computer for printing. Can also how to number the pages? And also I can use see fate on this workpad vista? Thank you.

  Joseph Monteleone,
  Thank you for visiting the Microsoft Answers community forum.

  Notepad is a very limited text editor, so you can't really do a lot of formatting.  Double-spaced, the only way is to put two 'statements' at the end of each line.  You can format the font, and set the page layout for printing, but apart from turn, wordwrap who speaks all the formatting, you can do it.

  To save a file, just go to file, save money, find the folder you want to save it in (don't forget remember where you saved it), name, and click Save.

  To send it to another computer on your network, you can choose the drive you want to move on the network and copy and paste, or drag and drop it.  Or you can go to the computer that you want to put on, navigate to the drive on your computer where you saved, and then copy and paste or drag and drop it.

  Let us know if you need more information.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to external number of WD My Book essential model HD: WDBACW0010HBK

  Original title: I have a number of WD My Book essential external model HD: WDBACW0010HBK

  I recently bought an external hard drive from Western Digital. To make a long story short 2 things are bad.
  The first is that it is not saved as part of the drive that I've assigned initially it. He was initially listed as E drive and now it's rising as drive K. I just recently changed it to Z and he remained on this drive so far. Then who is the most annoying is that it is no longer registered for longer then 30 seconds. It connects then it disconnects constantly. I tried to remove the files but I only got half of them and now it's so bad that he connects long enough to do something. in any case, I tried to update the firmware, do not access the external HD long enough to update. I tried another computer, he continued to have the same problems. Change the paths of access to something that would not be in conflict with other readers. Tried different usb ports, turned off the firewall and anti virus programs that slow down. I can't think anything else because I've been at this for 5 hours in a row, but I don't know that I did more.
  The fundamental problem is that it reads, everything is still on the EHD, but it keeps connecting and disconnecting. I can get 1 file each time that in a while, but nothing big, otherwise it disconnects in the middle of the assignment.

  Specifications of the computer
  Windows 7 64 bit
  8 GB ram
  Processor i5

  Hello

  I strongly suggest to try a new cable if it is not too much to get a new. I agree that the fact that this happens on several computers mean that there must be a flaw somewhere on the disk itself. I would contact the manufacturer to make sure you get the right cable.

• URGENT! get the same message "serial number not valid for this product" and I RE install on the same computer that crashed last week...

  I'm trying to RE install PSElements 11 on a computer where it WAS last week but has had a hard disk crash. The message is wrong and the serial number is correct. URGENT because I'm on the apple store, trying to get help from apple people and they don't want install me a new version of Yosemite by making computer more slow...

  Error "serial number is not valid for this product". Creative Suite

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

• Get-vmhost does not reflect the number of correct hosts on a few scenarios

  Hello members of the community.

  When I try to use the cmdlet get-vmhost against a cluster that has one or no hosts in there, I don't get the number of correct hosts. Here are some lines for this information.

  foreach ($objDataCenter to $objColDataCenters)
  {
  $objColClusters = get-Cluster-location $objDataCenter

  foreach ($objcluster to $objColClusters)
  {
  $Details = $Null
  $objClusterBaseRP = $objHosts = $objDataStores = $objVMs = $Null
  $intNUmDatastores = $intNumHostCPUs = $intTotCPUMhz = $intTotUsageCPUMhz = 0
  $intTotMemMB = $intTotUsageMemMB = 0
  $CPUStat = $CPUStatMax = $MemoryStat = $MemoryStatMax = 0
  $intTotMemGB = $intUsageGB = $intMemResGB = $intMemLmtGB = 0
  $inttOTDiskCapacityMB = $intTotDiskFreeMB = $intTotDSCapacityGB = $intTotDSFreeGB = 0
  $intTotVMMemGB = $intTotVMCPUMhz = $intNumVMCpus = $intTotVMMemMB = 0
  $intTotVMProvisionedSpaceGB = $intTotVMUsedSpaceGB = 0

  $objHosts = get-vmHost-location $objcluster

  $objHosts.Count

  }

  }

  code above produce white for clusters that has one host for all other groupings that has 2 or several hosts results are correct. I know that there is no point of having a single node cluster or not, but the result does not reflect his decent stats.

  In the same way under lines also produce incorrect information to the cluster that has no HOST or a single HOST that is in maintenance mode and has no inside VMs

  $objVMs = get-VM-location $objCluster

  $objVMs | %{
  $intNumVMCpus += $_. NumCpu
  $intTotVMMemMB += $_. MemoryMB
  $intTotVMProvisionedSpaceGB += $_. ProvisionedSpaceGB
  $intTotVMUsedSpaceGB += $_.usedSpaceGB
  
  }

  When I print the values of all the variables above, it should report 0 instead I have the chance to see some numbers. Please note I have explicitly assign values $null to all objects and 0 in all other variables at the beginning of the loop for clusters.

  Any help to solve this is greatly appreciated - thanks

  Kind regards, Philippe

  Hello, Ramkrish-

  Welcome to the communities.

  For the first part, the number of hosts in a cluster with zero (0) or one 1 host - there are a number of things happening there.

  When the Get-VMHost call returns only one host, and you then try to access to the. Property of the count of $objHosts, you try to access this property on an object VMHost, not an array of length 1 with a VMHost inside.  And, since the VMHost object has no property '. " Count' you get a return of the 'white' or null.

  And when Get-VMHost will return no host, and you are trying to access. Count on $objHosts, you effectively type '$null. "Count", since $objHosts - eq $null at that time.

  Two ways to handle these cases would be to use the Measure-Object cmdlet or explicitly to a table, even if zero or one VMHosts are returned.  As:

  ## using Measure-Object$objHosts = Get-VMHost -Location $objcluster($objHosts | Measure-Object).Count    ## correctly returns 0 or 1 (or greater)...## or## forcing an array, even if 0 or 1 items returned$objHosts = @(Get-VMHost -Location $objcluster)$objHosts.Count        ## correctly returns 0 or 1 (or greater)...
  

  Regarding the behavior you're seeing with the statement Foreach-Object with $objVMs, I suspect that the behavior of the Foreach-Object statement when you're running an empyt null him is at stake here.  In other words, while you can imagine "$arrEmptyArray | % {'Hello'}' to produce anything, happening actually by an interation of the loop (really - try - the).  So to avoid this, you can delete the unnecessary part that stores the output of Get - VM in the variable "$objVMs" and combine the lines to channel the output from Get - VM directly to the Foreach-Object statement, as:

  Get-VM -Location $objCluster | %{    $intNumVMCpus += $_.NumCpu    $intTotVMMemMB += $_.MemoryMB    $intTotVMProvisionedSpaceGB += $_.ProvisionedSpaceGB    $intTotVMUsedSpaceGB += $_.usedSpaceGB}
  

  By the way: while we're updating this code a little, another way that you could get these totals is again using the Measure-Object cmdlet, this time with the parameter - sum, as:

  Get-VM -Location $objCluster | Measure-Object -Sum -Property NumCpu, MemoryMB, ProvisionedSpaceGB, usedSpaceGB
  

  Much more compact and allows just of PowerShell do the work.  Although you then maintain the return of the object of measures, depending on the situation, it is quite practical.

  How about that?

• CS6 upgrade returns: "this serial number is not for a product calling it".

  I have CS5 and have used it for about 2 years. The serial number for CS5 it is registered to my adobe id.

  So I decided to move to CS6 today. I registered so that my ID adobe as well.

  When I open CS6 and enter my new serial number, it tells me:

  Serial number you provided is valid, but calling it a product was not found on this computer

  Which is strange because CS5 is currently installed and running on this computer

  So he then invites me to choose a previous product I own and enter the serial number for this. So I select CS5 and enter the serial number for my CS5 license.

  However, he then said: "this serial number is not for a product calling." Please try another. "

  But he said not may all in detail below. Why is know not valid?

  Can you help me?

  Thank you!

  I understand John.  It was a rare event as usually the previous version serial number should be accepted.  That's why I recommend you to contact directly our support team in case of series available in respect of the account numbers cannot be used successfully.

  By contacting our support team directly at the Customer Contact then the exact serial number CS5 can be watched and specific corrective measures can be taken.  For example, if the serial number of the Creative Suite 5 is for a volume license then is refused by a retail installer even if there may be a way to upgrade valid.

• Many sheets in Excel to PDF conversion - page numbers for all the leaves, not individual leaves

  I need to convert the number of sheets in Excel in a single PDF file.  If I select each sheet with a personalised décor, page numbers for this journal (1 of 10) (1 of 5), etc.  When I select multiple sheets, the page numbers through the leaves.  Instead, it is from 1 to 15.  Make sense?  How can I tell Adobe to let alone individual page numbers?  Thanks for your help!

  Hi Penny,

  This feature has been changed to provide the same page, numbering of the Excel experience provides when you print your workbook or worksheets to other printers.

  It is possible to convert each worksheet as a PDF and then combine these PDFs resulting. Who will provide the numbering of the page that allows you to get.

  Making the print-to-pdf and then combine is to use Ribbon Excel PDFMaker "Create PDF and perform the Action" button.

  You can create an Action that uses the functionality of harvesters or Acrobat watermark to add page numbers as you wish.

  Kind regards

  Charlene