Nut thread inspection

Similar Questions

• Tripod screw fit not the bottom of camera

  I bought a 3Ti rebel and a Canon Deluxe tripod 300. The screw on the tripod does not seem to fit the hole in the bottom of the camera. It goes in a little, but don't get even closer, leaving the camera to rotate easily and rock when they are affected.

  This is not normal, right? How to test if it is the screw or the hole of the camera?

  Thank you.

  Yes, I remove the bottom plate of the tripod. And, of course, after that I posted this question, it dawned on me that I have an older tripod where I could remove the plate and see if this screw fits into the camera. In this way, I should know of the problem is with the nut thread or the thread inside the hole of the camera reception (whatever we call!).

  This one, a 'Silk' brand tripod, works perfectly. I just need to have replaced Canon tripod plate.

  Thanks to all for the replies. I wish I thought of this solution before posting my question. :-)

• Two threads in a Panel

  Hello
  I am developing a vision with CVI application that loads the files. VBAI after login... the application interface has two positions (left and right)... I want the two buttons START calls the same function CVICALLBACK (Inspection)... and this function call the function ThreadFunction and its parameter's thread (thread number)...
  I said two tables of the elements to control the two threads and I worked on these tables in the treatment ThreadFunction function...
  Now, I didn't understand how I spend the number of thread for the CVICALLBACK inspection function, in fact, when I click START on left position inspection begins on the left, where it starts on the right, also, if I click on the two positions, she sailed on two positions...
  Thank you for your help, it's urgent
  

  #include 
  #include 
  #include 
  #include 
  #include 
  #include "toolbox.h"
  #include "nivision.h"
  #include "VBAIInterfaceC.h"
  #include "ann.h"
  
  static int panelHandle;
  static CmtTLVHandle tlvHandle = 0;
  static volatile int exiting = 0;
  
  static int Tab_serial_num[2]={PANEL_SERIAL_NUM,PANEL_SERIAL_NUM2};
  static int Tab_inspec_name[2]={PANEL_INSPECTION_NAME,PANEL_INSPECTION_NAME2};
  static int Tab_inspec_butt[2]={PANEL_INSPECT_BUTTON,PANEL_INSPECT_BUTTON2};
  static int Tab_ecr_acc_stat[2]={PANEL_ECR_ACC_STAT,PANEL_ECR_ACC_STAT2};
  static int Tab_led_metro_stat[2]={PANEL_LED_METRO_STAT,PANEL_LED_METRO_STAT2};
  static int Tab_led_vert_stat[2]={PANEL_LED_CPL_VERT_STAT,PANEL_LED_CPL_VERT_STAT2};
  static int Tab_led_rouge_stat[2]={PANEL_LED_CPL_ROUGE_STAT,PANEL_LED_CPL_ROUGE_STAT2};
  static int Tab_led_jaune_stat[2]={PANEL_LED_CPL_JAUNE_STAT,PANEL_LED_CPL_JAUNE_STAT2};
  static int Tab_lcd_off_stat[2]={PANEL_LCD_OFF_STAT,PANEL_LCD_OFF_STAT2};
  static int Tab_lcd_on_stat[2]={PANEL_LCD_ON_STAT,PANEL_LCD_ON_STAT2};
  static int Tab_main_window[2]={PANEL_MAIN_WINDOW,PANEL_MAIN_WINDOW2};
  static int Tab_test_stat[2]={PANEL_TEST_STATUS,PANEL_TEST_STATUS2};
  static int Tab_text_error[2]={PANEL_ERROR_TEXT,PANEL_ERROR_TEXT2};
  
  void DisplayError(VBAIError error);
  void ButtonStatDisplay(void);
  void IndicatorStat(int ind, bool32 stat ) ;
  static int CVICALLBACK ThreadFunction (int thread) ;
  
  /*static int SetupApplication (void);
  static int ShutdownApplication (void);*/
  
  int main (int argc, char *argv[])
  {   
  
      if (InitCVIRTE (0, argv, 0) == 0)
          return -1;  /* out of memory */
      if ((panelHandle = LoadPanel (0, "ann.uir", PANEL)) < 0)
          return -1;
  
  ...;
  
      ...;
  
      DisplayPanel (panelHandle);
      RunUserInterface ();
      DiscardPanel (panelHandle);
  
  if (stepResults != NULL)
      free (stepResults);
      vbaiCloseConnection (session, 1)  ;
  
      return 0;
  }
  
  void DisplayError(VBAIError error)
  {
      ...;
  
  void IndicatorStat(int ind, bool32 stat )
  {
      ...;
  }
  
  int CVICALLBACK INSPECTION (int panel, int control, int event,
          void *callbackData, int eventData1, int eventData2)
  {
      VBAIError error = VBAIErrorSuccess;
  
      switch (event)
      {
          case EVENT_COMMIT:
  
              !!!!!!!!! The problem !!!!!!!!!!                       
  
          break;
  
      }
      if (error)
          DisplayError(error);
      return 0;
  }
  
  static int CVICALLBACK ThreadFunction (int thread)
  {   
  
  ....;
  
          while(!exiting){
  
                  SetCtrlAttribute(panelHandle,Tab_inspec_name[thread],ATTR_DIMMED,0);
  
                       ;
  
                          switch(i) {
                          case 0: IndicatorStat(Tab_ecr_acc_stat[thread],inspectionStatus);
                                   break;
  
                          case 1: IndicatorStat(Tab_led_metro_stat[thread],inspectionStatus);
                                  break;
  
                          case 2: IndicatorStat(Tab_led_vert_stat[thread],inspectionStatus);
                                  break;
  
                          case 3: IndicatorStat(Tab_led_rouge_stat[thread],inspectionStatus);
                                  break;
                                 ;
  
                          case 4: IndicatorStat(Tab_led_jaune_stat[thread],inspectionStatus);
  
                                 break;
  
                          case 5:IndicatorStat(Tab_lcd_off_stat[thread],inspectionStatus);
  
                                 break;
  
                          case 6: IndicatorStat(Tab_lcd_on_stat[thread],inspectionStatus);
  
                                 break;
  
                       }
  
                       Delay(0.5);
                       ...;
  ...;
  ...;
  

  Hi schweini,.

  Your thread function prototype doesn't seem correct.

  His entry should be a void pointer, not an integer.

  To switch to the thread of your button on which it started, you can use this setting.

  But you will need to pass a pointer to a valid variable.

  In your feed, you will get the value of the data pointer dereferencing.

  Here's a code sample (nickname).

  See if it makes sense.

  //in your Start callback
  static int start; //static is crucial here
  
  switch (event)
  {
    case EVENT_COMMIT:
      start = (control == PANEL_START_1 ? 1 : 2);
      CmtScheduleThreadPoolFunction (pool, ThreadFunction, &start, &funcId);
    break;
  }
  
  //in your thread function
  int CVICALLBACK ThreadFunction (void *data)
  {
    int which_side;
  
    which_side = *((int*)data);
  
    while (!exiting)
    {
      if (which_side == 1)
      {..}
      else
      {..}
    }
  }
  

• Microsoft Network Inspection System no longer works

  I use Windows Vista Business

  Can someone explain to me wht that is and how to solve it. He gets up and tells me that microsoft is looking for an answer

  Goryon

  I would ignore for now... This is what I'm doing and MSE works on my XP and Vista computers.  I hope that this "glitch" will be fixed by the next
  "Patch Tuesday" if not before.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_updating/Microsoft-network-inspection-system-has-stopped/6b0023ae-9b20-4080-9163-462b2d7ed108

  I received this notification 'window' for several days during the daily automatic update of MSE, but I stop receiving without any intervention on my part (although I did uninstall and reinstall MSE).

  You could follow the thread above or the MSE Forum for more information.

• Inspection ASA DNS debugging

  How can I debug ASA (inspection of DNS 9.1 (1))?  Specifically, the ASA does not block queries associated with applications to dig as follows to never reach "the.name.server":

  dig @the.name.server t ptr 1.2.3.4.reverse.somedomain.com.

  And I would like to be able to see how he responds to the query (and decisive) to block.

  I'm really just one question for the instructions of debugging that might help me to solve this, but if someone can tell me what it is this query that the ASA does not like what would be very useful.  It blocks the request even with very basic inspection enabled:

  policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 4096 policy-map global_policy class inspection_default   inspect dns preset_dns_map

  If I have the dns preset_dns_map "inspect" in it the ASA blocks the request, but if I remove the dns preset_dns_map "inspect" the query works fine.

  (Just to be clear, the customer in question is located on the SAA within the interface and "the.name.server" is on the external interface).

  Hello

  I didn't do it myself at any time

  I found that there is at least 3 different debugging associated controls to "check the dns".

  • debugging inspect dns errors
  • debugging inspect dns events
  • debugging inspect dns packets

  Maybe some of them lighting up could bring some clarification to whats happening.

  Under the following configuration mode

  type of policy-map inspect dns parameters preset_dns_map - see more at: https://supportforums.cisco.com/thread/2201942?tstart=0#sthash.3j02GDqr.dpuf
  type of policy-map inspect dns parameters preset_dns_map - see more at: https://supportforums.cisco.com/thread/2201942?tstart=0#sthash.3j02GDqr.dpuf
  type of policy-map inspect dns parameters preset_dns_map - see more at: https://supportforums.cisco.com/thread/2201942?tstart=0#sthash.3j02GDqr.dpuf

  type of policy-card inspect dns preset_dns_map

  parameters

  There is an option called

  ASA(config-pmap-p) #?

  Strategy-card MPF parameter configuration commands:

  audit of the DNS Protocol-enforcement message format

  Weather disabling this default setting with "no protocol-enforcement" helps or whether it is better the purpose of having to 'check the dns' I don't know.

  -Jouni

• Can I turn off "inspect sqlnet.

  In a recent Security Advisory Cisco (Advisory ID: cisco-sa-20131009-asa) there is a "SQL * Net Inspection engine denial of Service vulnerability" identified.  I intend to follow the upgrade process to solve this problem, however, I will not be able to perform the upgrade for a couple of weeks.

  Temporary work around suggested is to disable SQL * Net inspection:

  ciscoasa(config)# policy-map global_policy ciscoasa(config-pmap)# class inspection_default ciscoasa(config-pmap-c)# no inspect sqlnet

  It sounds pretty simple, but I'm banging my head on the desk, trying to figure out how this will affect all traffic database which can go through these interfaces.  If default sqlnet inspection is disabled does that mean I need to add explicit ACL entries by interface to allow this traffic?  I reviewwed information to this thread: https://supportforums.cisco.com/thread/2005571

  I know there are SQL and Oracle databases on this particular segment, but what confuses me, is that there is only some rules don't set up NAT anything right now.  Is there some sort of way to see if all the traffic is even the default inspection, so I know if it is doing anything right now?

  I appear to be overthinking this because I keep going in circles with my own reasoning.  I don't know what configuration information to include with my question.  I can tell you that there are several interfaces in use.  There is no NAT.  There are several levels of security.

  Thank you in advance.

  You can check the number of packets (if any) that matched this inspection:

  See the establishment of service-policy

  Patrick

• Adobe Edge inspect does not open

  Hello

  I'm launching Adobe Edge inspect, but he won't.

  I have another user in the same computer and it works perfectly. The strangest thing is that I have installed the software of this user (when the app starts).

  Console gives me this report:

  Process: EdgeInspect [4507]

  Path: Applications/Adobe Edge inspect CC.app/Contents/MacOS/EdgeInspect

  ID: com.adobe.EdgeInspect.application

  Version: 1.0.407 (1.0.407.0)

  Code type: X 86 (native)

  Parent process: launchd [176]

  Manager: EdgeInspect [4507]

  User ID: 502

  Date/time: 11:38:19.101 2014-02-06 + 0100

  OS version: Mac OS X 10.9.1 (B 13, 42)

  Report Version: 11

  Anonymous UUID: BE07DE49-C882-75EA-4EBF-AD729FE8C0C4

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  termination with eception exception of type dvacore::filesupport:dir_create_exception: $$$ / dvacore/filesupport/DirCreate = the directory ' @0 ' could not be created. " Please check the rights of protection or permission from parent directory.

  Abort() called

  Thank you :-)

  Well, I solved it by removing the file under/user/library

  Thanks to...

  adliecxkamnadnra, 27-mar-2013 14:09 in response to Mark Rausch Report

  No dice.

  I sent the file:

  Users / [username] / Library/Preferences/Adobe/Edge inspect

  in the trash. Has restarted the app and the same thing. Inspect edge seems to start, made a new pref folder, then breaks down in 3 seconds.

• Adobe Edge inspect Chrome Plug in gray. Stopped working.

  For some reason any plug-in for chrome edge inspect stopped working. I am connected to wifi even, I am connected to creative cloud, program Adobe Edge is on, my devices can find my computer to connect. But the Chrome icon is grayed out and will not light.

  I tried to reinstall. Restarting my computer. Signature in the browser of chome under the same user name as my account of cc of adobe. Nothing has worked so far.

  Strange. At work last week when I tried it. Was there an update of chrome or Adobe CC?

  In fact, this solution worked for me:

  http://forums.Adobe.com/thread/1308519

• Problem installation 'local disk' - edge inspection

  Adobe Edge inspect - "the installation directory must be on a local hard drive.

  Hello

  I would like to install Adobe Edge inspect.

  but I got this error message "installation directory must be on a local hard drive.

  But the path is C:-Program Files (x 86)-Adobe-Adobe Edge inspect.

  and the file exists.

  I am running windows 7 64 bit

  I try to do anything but 'safe mode'.

  any solution for my problem?

  --------------------

  

  ------------------------------

  Hello

  I would like to install Adobe Edge inspect.

  but I have this error message "installation directory must straighten up to a local hard drive.

  But the path is C:\Program Files (x 86) \Adobe\Adobe Edge Inspect\

  and the folder exist.

  64-bit of I am running windows 7

  I try it in 'safe mode' but nothing to do.

  which solution pour my problem?

  Please see this thread for a possible solution: http://forums.adobe.com/message/4959285#4959285

  I hope this helps. Please let us know if do you work or not.

  Mark

• Thread of messages with false contacts

  I have a thread of messages which, since the installation of Sierra is showing the wrong contact and the mix of messages from the two contacts.

  It seems that this is because the two contacts work for the same company and have identical entries their: 'work' of phone field. If I remove the scope one of the contacts and Messages to restart, the thread returns to two threads separated by the correct contact.

  The two contacts have iPhones and different MOBILE numbers that show as being related to separate Apple ID I assume that before I upgraded, Contacts, or Messages has been able to use this information to treat them as separate persons. Also, I assume that's the way it should work.

  How do I get things to normal?

  Thank you very much

  Christian

  Hello

  Change/edit the name of the field map to read 1 or something that prevents the binding.

  Report it here http://www.apple.com/feedback/ (there is no one of the separated Contacts).

  

  22:00 Friday. September 30, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Deleting an old thread

  A mod can please remove the following thread? Or, at the very least, delete the official names in the upper part and the response after the second answer?

  I deleted the e-mail program and he want to come back.

  In addition to many years old and useless, I don't want the display name associated with the post. The account associated with this post is no longer active and has been under a now defunct e-mail address, so it is impossible for me to connect you and redact my credentials or remove the post.

  Thanks for any help you can provide. It would be greatly appreciated.

  I reported to our guests, now it is them. Even if you had access to the account, you would not be able to edit or delete the post, you have 15 minutes to change.

• Thread of mail IOS10

  I prefer how IOS9 mail works, no Adviser how to select a thread without developing all the emails to the right?

  I have HHHAAATTTE the way watch mail thread ios10. ios9 was so much more functional and effective!

• iOS 10 Mail app - threads are impossible to read with style answer-everything Outlook (without quotes)

  Outlook and the Mail app both old showed you a list of e-mails in a thread; If you want to dive to an email, you must click on this email.

  The new view of thread is essentially impossible to use now, since there is no view that shows each email in a list. Instead, if reply - all on your e-mail service does not add to citing it vertically and mark a horizontal line between the contextual emails, you end up seeing the WHOLE thread in each individual e-mail. It's 100% fine if you also have a vision where you can see every email truncated in a list. But this is no longer the case.

  I'm going to have to cut the wires completely from my computer (Outlook) is impossible for me to read in the current state.

  100% behind you! Please Apple, can we have an option to make the threads as they were in the iOS 9? It was actually a useful feature. In iOS 10, it is completely impossible / a lot of your time!

  Even if the quirks have been developed and e-mails would collapse correctly it is always not very useful when you have long filaments (which, when you use mail app for email to work can happen in the course of a single day with 20-30 + emails).

• View threads AND grouped by date/conversation

  Hello

  I try to have messages see the thunderbird grouped by date (with a thread on today, yesterday, last week, etc.) and within these threads, see email conversations. A conversation that began three weeks ago, but has received a new email today is expected to manifest itself in the thread today, but from the first email of the conversation.
  I did not understand if it is possible, as grouped by (Date) and Threads are mutually exclusive. Any ideas?

  Thank you

  As you say, it is there only one group so at the time. So I guess that your out of luck.

  You could fill a better bug report and see if one of the developers interested. https://Bugzilla.Mozilla.org/

• Do not thread conversations

  no thread.

  just separate emails from the same topic scattered everywhere.

  I just restored by mozbackup.

  What gives?

  Paradive said

  no thread.

  just separate emails from the same topic scattered everywhere.

  I just restored by mozbackup.

  What gives?

  solved.

  UN/re-installing Conversations ended.