OAM 11 g R2 - Udont have to have permission to access obrar.cgi on this access
Hi gurus,In our environment, we have oam 11g r2 we protected an application that uses the forms authentication based, with 10g webgate on apache 2.2. We are able to protect the application because soon the user is authenticated, we get
403 ERROR
Forbidden
You don't have permission to access obrar.cgi on this server.
Gurus can tell me how to debug this problem, any pointer will be really useful.
Thank you
Hello
In your httpd.conf apache 2.2 file, you should have guidelines such as:
AuthType Oblix
user need valid
and it should work OK. However, if you have changed "/ *" to a subdirectory (because you want only to protect the OAM subdirectories) then you need to add:
AuthType Oblix
user need valid
in the configuration file, because obrar.cgi works from the logical root of the web server (by the way, is not a valuable resource, it is generated by the WebGate).
Kind regards
Colin
Tags: Fusion Middleware
Similar Questions
-
Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.
I emptied my cache. I rebooted Firefox. This is my email website - never had a problem before. I am able to access it on Safari. I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?
-
Access denied you don't have permission to access the Apple Forum
This is the second time what is happening:
I connect and if
I'm changing the avatar in the communities of Apple Support,
suddenly, I get this message
Access denied
You don't have permission to access the 'http://discussions.apple.com/welcome' on this server.
Reference #...
and I can't access the forum apple more, each page get access denied.
Then I clean the caches, history and wait a while, and then I can go back in
No idea what I'm doing wrong!
You can't make an avatar custom, until you reach level 3
https://discussions.Apple.com/static/Apple/tutorial/reputation.html
-
Forbidden - you don't have permission to access on this server
Recently, I cloned git a customer Web site and I need to work on that, but when I try to open it via mamp or ampps a message appears:
Forbidden you don't have permission to access the 'websitename"/application/index.html on this server.
I did extensive research and everyone says to change the permissions on
httpd.conf
, but nothing happened. I tried to reinstall and nothing more. If I navigate through the terminal in the folder of the Web site, I have all the permissions.Does anyone have a solution?
It is difficult to understand your configuration, but you try to run the web site locally? If so, the url is localhost/websitename/application/index.html or whatever the path to the root of your document...
-
Hello
Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message
No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery
Thanks for your response
-
original title: sharing of Vista with XP
I'm having a problem of sharing back and forth between xp and vista. I've set up the sharing, but I still get the error message that I don't have permission to access files
Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.
-
Original title: shared folder
try to share files and folders between my laptop and my pc... When I try to access partitions shared between them = I got this msg: "you don't have permission to access the file or folder you are trying to access. Contact your network administrator to request access"can u help?
Hello
Follow these steps:
Step 1: Make this file and printer sharing is enabled, computers.
Follow the steps listed in the link below to check the parameters and the essential elements to share files over the network:
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentialsAlso check if network discovery is enabled, the computer. Steps to follow:
i. click on Start, click on Control Panel.
II. Select network and sharing Center
III. Select change advanced sharing settings
(IV) in respect of network discovery, select Enable network discovery
Step 2: check the sharing permission on the shared folder.
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someoneStep 3: you can also try to disable your firewall program and security and then try to access to the shared folder. Make sure that you activate it if this step does not help.
Note: Antivirus/Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.In addition, see these articles:
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers
-
Original title: cannot access files on a folder on the drive hard usb after you have turned off sharing on a network.
About a week and a half, I have set up my external hard drive usb to share on my network domestic as well as my brother could access some files on his laptop computer. I've been playing with the security of some of the files on the hard drive and made sure that he could not access some of them. I don't remember exactly what I did unfortunately. After I had changed the security access, I was still able to access all files and my brother could not access it. He got the files on the hard drive and I turned off my computer. A few days later, I tried to access the files that I had limited and I was stuck. When I went back in the drive to recover some files, I received an error "you don't have permission to access this folder. Click on continue to have access to this folder permanently. "When I click on continue that another dialogue box comes up saying"you refused permission to access this folder. To access this file you will need to use the Security tab. "I click on the link to Security tab and another dialog box appears asking"to continue, you must be an administrative user with permission to view this object's security properties. Do you want to continue? "I'm obviously the administrator because I have this computer and I'm the only account on it. From this point, I don't know what I do or what I'm supposed to do to recover my files. I played a bit with a couple of things and I was able to get into certain folders, but its an extremely long process that I don't have the time for. A side effect of which in fact so I can see the files, is that for any movie file, I try to access it, I get an error. When I try to open it with Windows Media Player, I get the error "Windows Media Player cannot access the file. The file may be in use (which is not the case), you won't have access to the computer where the file is stored (which is not supposed to because the computer on which it is stored my personal computer), or your proxy settings are may not be not correct (what?). "If I try to use another program like VLC media player, I get a similar problem where an error comes up saying that it was impossible to access the file. I can see the file and see the properties but I am unable to actually see the film. I can't move the file anywhere because I don't have administrative rights. I'm under Windows 7 Ultimate, and if someone could help me please, that would be greatly appreciated.
Hi Ridley,
I see that this problem is old enough but you (or others) may have problems with it. Here's what I did:-Got to your hard drive and right click on the folder that is causing all the trouble.-Click on properties.-Click on the Security tab-Then click on advanced-You will see a window with a few user names. Now click on owner in the tabs above.-Click on edit, then select the user name you want to open the folder and don't forget to tick the box that says "Replace the owner of subcontainers and objects", then click on apply.A pop will come which says something like "You have replaced the property for the selected records" or something in this way. It worked for me and I hope this post is helpful for some people.Nina -
"You don't have permission to access to" a computer - Windows 7
Now, I have 3 laptops in my house. We're on Windows 7 (let's call it W7) and two are on Vista (we'll call V1 and V2). On my Windows 7, I can connect (via the network - all PC use the same Linksys wireless router) v1 without problem and see shared files, but I can't connect to V2. I get the message "you don't have permission to access \\PCName." Now if I put in place a different id user on W7, I can access the V1 and V2. I need to stick with my original if possible user id, because this is where I've already implemented a large number of programs that I need for work.
Any ideas on what could be going on with my original user id? He worked two weeks ago, although I added a few programs as I finally tried access V2. Thank you!
You can 'stick with your original user "; just add it to the machine of V2. See point c below for more details:
Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.
In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:
Discovery of plug in the network
Open the files and printers sharing
Turn on the sharing section Public folder sharing
Plug the password protected sharingA. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.
(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.
C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:
Start > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!
-
Hello
I created a new e-mail account and fails my. Running Microsoft Office 2010.
When you open outlook, I get the error:
Access to the file is denied. You don't have permission to access the file Email C:\PROGRA~1\Office14\*** address is removed from the privacy * address email is removed from the privacy *.
Cannot open your default e-mail folders
Click Help and I get the following message:
This error can occur if you attempt to run Outlook in a Terminal Services session when the Outlook offline (.ost) data file is used by the console session.
To access this instance of Outlook, exit the current Terminal Server session, and then start a new session using the following run command in Microsoft Windows:
mstsc.exe/console you must be an administrator on the computer that accesses the console session. You can not access a console session of a computer that is running Microsoft Windows XP Home edition. But you can do this from a computer that is running Microsoft Windows Server 2003, Windows XP Professional, Windows Vista, or Windows 7.
For more information, see article 826488 in the Microsoft Knowledge Base.
You must make sure that your e-mail records are kept in a place outside system such as C:\Program Files folders. It is a restriction of the UAC.
-
Windows cannot access file you will not have permission to access the item path or specified device.
I have windows7 OS, I try to open any application above the display of error messages.
Please help me...
Thank you!!!
original title: Windows cannot accessanother user account works fine.
Then, your profile is corrupt. Create a new user, copy documents and other profile corrupted on the new profile.
Do not copy * all *-only things you have created. (Except the shortcuts).
Is the user profile damaged an administrator or standard user?
-
Original title:
There are three computers in my office. Both run Windows 7 Edition Home Premium and the third is running Windows 7 Professional.
I am trying to allow access to files on the computers of Home Premium. I go to 'Network' and open the other computer, but he said "You are not allowed access. \\Mike-PC\c contact your network administrator to request access." I went to Mike-PC computer to 'Share' this folder then joined the homegroup even / working group and everything in 'Advanced sharing' in the 'network and sharing Center', but it does still not activated.The Professional Windows 7 computer successfully ' "shared folders and the other two computers can read / write files, but not the other way around.
Any help would be greatly appreciated.
Hello
1 are these computers using a homegroup or working group?
2. were you able to share files earlier?
3 have had it all changes to computers, before the show?
Method 1:
Refer to the suggestion provided by Jack MVP on January 25, 2011, in the following link.
Method 2:
Disable the firewall and security software and check.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.
-
Connection error - "you don't have permission to access to the DPS.
Hello
Tell me why I can't access dashboard DPS 2015? Get the error 'You don't have permission to access the DPS'... I can access the old version of the table edge DPS but thought I would go to a new Hey Presto I can't access it with my personal adobe ID or my very frustrating work, adobe ID!
It looks like that your ID Adobe is not one attached to the master account in your DPS license. I suggest to call the business support, they should be able to figure this out for you.
Neil
-
I tried to download CS6 for resettlement, after my other laptop has been damaged. The file is downloaded approximately 3.3 GB of 3.8 GB, but now will not continue any further because it says I don't have permission to access in the download bar... (I can't read the rest). I did have the chance to enter my serial number, but either. I'm sure that I was connected to the adobe Web site when I started to download the file too. Any help?
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.
Then you need to either:
(1) sign up for cloud creative then you can build a simple edition approx. attention however: this approach will no longer valid as of May 1, when we withdraw support for a unique creative cloud and unique edition apps are only on devices iPad.
(2) sign up for a full license of DPS. You can request information on prices using Adobe | Request for consultation.
Neil
Maybe you are looking for
-
Panic of the common core, EtreCheck 'good '.
We saw it as "frequent kernel panics iMac from early retirement." Suspected memory low so I doubled it, but iMac panicked at 5 minutes from the start. Here is the EtreCheck to run correctly after a second panic and panic report generated when he pani
-
USB flashdrive will not cut because it uses Finder
This happens often but not always. Flash drive USB Sandisk will not - cut with the message that "the Finder is to use. As far as I know, nothing is open. The message also says that if I use force quit, I can damage the USB drive.
-
Since Monday, the sites I have visited for years are now suddenly giving me this message. I noticed that when this message appears, the address bar is normally the "https" instead of the usual "http" display, I remove the s and sometimes it does not
-
Satellite L650-1MT Fan activity difference when it is connected to...
Hello I have Toshiba Satellite L650-1MT, and I have a small problem regarding the activity of the fan, during the passage of the battery adapter. First of all, in the power settings, I have the balanced adapter and battery option, and I have done a f
-
New blackBerry Smartphones version of the app world
I have the Curve 8520 and now have app world version 2.0.1.12. I got a message yesterday that the new version of 2.1.0.39 is available, but there is no 'Upgrade' to click on download button.