OATS 12.5 LDAP Setup Guide

Similar Questions

• ACME Setup Guide: JDBC: / / [host]: [port] / [database]

  After the advice of the cf_menace great (and if necessary!) in my previous post, I will be at PG. 80 to the ACME Setup Guide for the CF, and everything goes perfectly. But I came to a line, I do not understand. In the technical note, I am asked ' do ' before continuing to get CF and MySQL to start to communicate; He asked me to plug in the JDBC URL in the source of data/CF Admin as "JDBC: / / [host]: [port] / [database].
  
  I followed the installation of ACME to 100%, including the new installation on a new OS XP Pro 2.0 of Apache and MySQL, the correct versions. But I didn't ask anything anywhere to define this path in the configuration above pages. It says choose driver as 'other' and I guess THAT name of Data Source is supposed to be jdbc:mysql://localhost:8300 / shawn since that's my localhost CF port (I think that's what JRun4 stressed and gives me a valid, if blank page (localhost:8300) gives me "index of" legitimate page) and shawn is my logon administrator level and only for my XP machine. I made sure I chose the right .jar for MySQL. I put in the right directory and restarted the server.
  
  It gives me the error "trying to create a data source with a name that is not valid. "The names of data source must match the variable naming conventions CF..
  
  Any suggestions I should be typing for JDBC: / / [host]: [port] / [database] since my MySQL install has been completely according to the instructions of the ACME, no database is still and otherwise I totally followed the ACME procedure 100% to a 't', so to speak, and it works perfectly until now. No versions of what anyone on a totally new XP installation.
  
  I'm sorry to ask what is yet another very embarrassing issue, but up to now I double-clicked just bundles for PHP/MySQL/Apache/phpMyAdmin...and they just up and work... And I'm going into town with Flash 8 and work / workable scripts in PHP from there.
  
  I won't go forward until it is OK, because it's the closest I'm going to make this work.
  
  The TechNote is: http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
  
  What I am doing wrong? If it helps, so much the better: http://counterchaos.selfip.net/index.cfm . I'll give the CF Admin password if someone sends me ([email protected]). I will walk your dog for a week if you help me with this, I promise you :)
  
  Shawn optimistically
  PS I sent the person who wrote ACME, but his speech has bounced back:)

  Thank you. I think that your code did the trick. Half there me. I had to create a database, I've done in the command line MySQL: create counterchaos in the database

  Then I named the MySQL5.0 data source and added the apparently appropriate info, for root@localhost I guess it is, with the name (root) and the password command-line MySQL request when I open it.

  I did not add a port, as when I tried to add the port 8300, she didn't find it.

  When I 'check all connections' now, it shows the Microsoft Access with Unicode dbs standard delivered with CF, and at the end she MySQL5.0, no name of driver and the State of OK.

  programmers of PS are like doctors: we sit and * how much they are paid, but no one would ever try to perform surgery to heart open and when they go to the Dr for this, they certainly aren't complaining then! You are amazing :)

  Hope that's all right - guess I'll know that I'm on :)

  Shawn

• A T500 driver setup guide anywhere?

  Hello

  I was wondering if perhaps it was a guide out there on the net to learn how to configure its T500 correctly after a fresh install of the OS.

  I followed initially one for the T61 (with corresponding T500 drivers) of notebookreview.com, but I did not get properly operating system identify my ATI HD 3650 card despite having tried to install the drivers of the T500 matrix (they said that they could not find the right hardware) and the Catalyst 9.3 has not helped either.

  Thank you.

  Here is a mini-guide to Clean Installer for Vista with graphics switchable.

• Is there a "ESXi and vCenter Setup Guide" available?

  I downlaed 'ESX and vCenter Server Installation Guide 4.1 ESX' PDF, but I need an ESXi version as I want to know rather than ESX ESXi score structure.  Is there a same doc for ESXi avaiable?

  Thank you!

  You can find a great description of Rickard Nobel at http://rickardnobel.se/archives/776

  André

• Proposal Setup infrastructure - Oracle database, LDAP, Weblogic Server, part operational

  Hello Experts!

  First of all, until I opened this topic I tried to search for similar positions that can hold at least part of the necessary information for me. This topic is that most related to the architecture of the whole system in the sense of the application that contains a part of database (oracle with data models database), the operational part (unix scripts called from the web interface), weblogic server where MS Java application runs and the last part is LDAP Setup for supported LDAP grups.

  Currently confirmed architecture is for me unacceptable from the point of view of dorsal because everything would be installed on the same physical server (physical machine). From my point of view, there should be at least 3 physical separate servers:

  (1) Server database where the Oracle database is installed (say ommit backup and disaster at this stage recovery)

  (2) operation of servers shared between several applications to manage operational tasks and application configurations

  (3) separate server for Weblogic server, the LDAP server and Java application is

  Given that 2 points are obvious to me and I provided them with really simplified form then 3. is not entirely clear to me mainly due to the fact that I am the architect of solution for datawarehausing, not for applications based on J2EE.  Under the following link:

  webloic Oracle server needs a server infrastructure

  I just read to support failover and balancing I should have two different boxes physical and Weblogic software installed on each of them. I know not so so many separate for the 3rd point above mentioned how boxes I need. I would appreciate if you can share your thoughts on this subject by considering the following points:

  -scalability (1000 users at the same time)

  -further development

  -maintenance

  -installation costs

  If you can guide also links to cover this topic, I'd be more than happy

  Thanks in advance!

  Kind regards

  Bolo

  
  

  Hi Bolo

  Here's WDM of Oracle Identity management includes the installation of OID:

  Content

  I'm sorry for the confusion.

  I meant "General guidelines of architecture of say that you should keep the boxes", for example: LDAP must be in another box of WLS, also database must be in a different area, this isn't really something related to Oracle products, it is only related to the definitions of architecture.

  WebLogic Server at the end being that a java application is running in the virtual machine JAVA, WLS should run in the same box as the JVM as it comes to a unit in terms of functionality.

  Best regards

  Luz

• LDAP contacts and photos for jabber, ipad, iphone, and Android does not

  Hi guys,.

  I have been and get off this forum and google after all settings and configurations, but I do not receive my ldap directory in sync with my mobile devices, which means, I do not see their photos or any contact details I can IM only my contacts.

  My ipad and iphone from the newspapers, I get the following error.

  -2014-06-25 11:11:18.181 DEBUG [a32c000] - [csf.person.ldap] [bind] LDAP bind error. code =-1, msg is Can not contact the LDAP server

  My file config.xml - jabber for Jabber 4 Windows photos everything works 100%.

  I have the UC Services configured and added to my end user.

  I have the LDAP Setup on my devices TCT, tab and BOT with no luck.

  What I'm missing or doing wrong? Why it works 100% for J4W but not my mobile clients.

  Suggestions, examples or tips would be appreciated.

  Links that I used:

  https://supportforums.Cisco.com/document/101766/Troubleshooting-Cisco-Jabber-iPhone

  https://supportforums.Cisco.com/document/129841/configure-directory-search-Jabber-iPhone

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/Unified-Communications-Manager-version-85/113498-Jabber-LDAP-00.html

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/iPhone_iPad/JABI_BK_I30346C6_00_installation-and-configuration-guide-for-iOS/JABI_BK_I30346C6_00_installation-and-configuration-guide-for-iOS_chapter_0111.html

  http://Warcop.WordPress.com/2013/07/08/Cisco-Jabber-and-your-XML-file/

  A configure the LDAP UC service for iPad and the directory entry BDI for mobile devices in you jabber-config. XML?

• OFFICEJET PRO 8600 - I need a User Guide

  I configured the printer and used for most printing.  Now, I want to test faxing and possibly send and receive faxes.

  The 104-page Setup Guide has been provided.  This Guide refers to a 'User Guide' which I didn't with this priinter.

  I need the User Guide, please.

  Mike Eyster - [email protected]

  Hello Mike,.

  Accessible to the public user's Guide online at hp.com.

  You can find the guide to the user below, I suggest you click with the right button on the link and save it to a location of knowm for your convinience:

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

  Shlomi

• The user guide for Sonytv NSZ - GT1

  Is there someone out there who has a downloaded User Guide?  I found it online, but it has a lot of links.  We bought a floor model and the manual was not in the box.  If you can and are willing to help with PDF txt I sure would appreciate it.

  THX,

  Larry

  Hello Larry,.
  Welcome to the community of Sony.

  The user guide for the Sony Blu - ray Disc Player NSZ - GT1 Google TV-powered is not available in PDF format. However, the reference guide and the Quick Setup Guide for the unit is available for download in PDF format.

  Reference guide:
  http://www.docs.Sony.com/release/nszgt1.PDF

  Quick Installation Guide:
  http://www.docs.Sony.com/release/nszgt1_qs.PDF

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• ACS 5.1 - AD authentication LDAP VS

  Any help on this would be great

  I can manage to get my account record in the thinking of Active Directory configuring cisco switch in the external identity stores but not my setup LDAP here are a few successful newspapers, log in and unsuccessful newspaper with ldap.

  AD-SETUP

  Selected identity store - AD1

  Current identity store does not support the authentication method; He jumps.

  GANYMEDE + will use the global configuration GANYMEDE password +.

  Returned GANYMEDE + authentication response

  Received authentication GANYMEDE + CONTINUE application

  Using the previously selected Access Service

  Political identity was assessed before; Sequence identity continues

  Authentication of user in Active Directory

  Recovery of the Active Directory user groups succeeded

  Active Directory user authentication succeeded

  After authentication

  Access policy
  Access service:	Default device Admin
  Identity store:	CDs
  Shell selected profile:	Privilege mode
  Active Directory domain:	Blah.com/results.htm
  Group membership:
  Access matched Service selection rule:	Rule-2
  Comparative political identity rule:	By default
  Some identity stores:	CDs
  Application identity stores:
  The selected application identity stores:
  Mapping of matching rule group strategy:
  Matching rule permission policy:	Rule-1

  The only problem with this configuration is that I can only add the domain blah.com/results.htm example and I get massive latency since the authentication process will over State to other domain instead of the local controllers.

  I can tell by the STATUS of the AAA in track because of dashboard that latency is about 8000ms and the slow, log on to the switch.

  LDAP-SETUP

  In my LDAP configuration I have a primary host name and secondary closer to home to avoid latency I do a test of bind that returns successfully on both hosts. Configure my Orgainzation tab directory and do a test configuration to get a return of the Group > 100 > 100 topic.

  I have reset my indenities to instead of AD LDAP stores and try again, but for some reason that I get 22056 object not found error! I can't just that work on here are the details

  Corresponding rule

  Selected Access Service - Admin default device

  Evaluate the politics of identity

  By default matching rule

  Selected - identity store

  Current identity store does not support the authentication method; He jumps.

  GANYMEDE + will use the global configuration GANYMEDE password +.

  Returned GANYMEDE + authentication response

  Received authentication GANYMEDE + CONTINUE application

  Using the previously selected Access Service

  Political identity was assessed before; Sequence identity continues

  Send the request to the primary LDAP server

  User authentication against the LDAP server

  The user's search ended with an error

  Main server failover. Switching to the secondary server

  Send the request to the secondary LDAP server

  User authentication against the LDAP server

  User not found in the LDAP server

  Object was not found in the identity of the point of sale.

  The advanced option is configured for a unknown user is used.

  The option 'Refuse' Advanced is set in the case of a request for authentication has failed.

  Returned GANYMEDE + authentication response

  Are there ideas, I can try so that it can find my account as the structure of the AD did? ideas please?

  see you soon

  HI Ed,

  Try using a standard LDAP browser (www.ldapbrowser.com ) to view LDAP structure.  Verify base DN used for searches matches
  
  structure.
  
  Regards,
  
  ~JG
  Do rate helpful posts
  
  

• Guide to Installation of the MEV

  Hello

  I'm not a DBA, please excuse my ignorance.

  I'm looking for the Setup Guide enable VPD on a 11.2.0.3.0 Oracle database worm (AIX 6.1). I will pass on the instructions of my DBA to help out me with a CEP. They are tied up a little today. This initiative will help things move faster. Thanks in advance.

  Kind regards

  Ben

  As SPV is not a separate option that does not exist an installation guide. Documentation for DTV is here using virtual private Oracle server to control access to data

  Sybrand Bakker

  Senior Oracle DBA

• ACCOUNT of ACHIEVEMENT (GUID #)-Law Services

  Hello

  I m trying to configure my ACCOUNT of the ACCOMPLISHMENT, in my right to DPS2015 server.

  The CURL method go to the URL:

  http://edge.Adobe-DCFS.com/DDP/issueServer/issues?accountid= < my GUID > & targetDimension = all

  to recover my Cloud of ADOBE products. Where < my "GUID" > This is my configuration of account adobeid.

  I m recovery of my setup GUID in the URL:

  https://www.dpsapps.com/DPS/entitlement/index.php

  I m using my EDITOR adobe ID and the do LOOP does not return any product.

  I m trying with my adobe ADMINISTRATOR ID and do no any product return either.

  A tip?

  Thank you.

  Leo

  Hello

  The URL for list of question that you were talking about is for DPS (classic), please see the following article on how to generate the list of similar question for 2015 of DPS:

  Digital Publishing Solution helps | Use the API of producer content Service to access collection and Product Details

  Best,

  Mike

• Get smashed on vCenter 5.1 Setup SSO

  VMWare experts,

  Get smashed on the vCenter 5.1 Setup SSO and I was wondering if I could get assistance.

  That's what I've done so far:

  1.) Execute the "rsaIMSLiteMSSQLSetupTables.sql".

  2.) change only the part "C:\Changeme" of the script that has been 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.SQL2K8R2\MSSQL\DATA '.

  3.) Execute the script that creates a database named RSA

  I then went to vCenter install Simple which began by installing the SSO, I set myself on.

  Under Database Type: I chose MSSQL:

  I paint a white following the syntax remaining fields.

  The names of the affected servers are:

  Name of the SQL Server: TEST - SQL01.test.local

  Named instance of SQL: SQL2K8R2

  vCenter Server: TEST - VC01.test.local (where I install the SSO, inventory service, etc.)

  No idea on what to set for name of database, Windows, JDBC URL, authentication etc.

  I tried to follow the installation guide and there was no mention of whether I needed to implement ODBC connections or something like that.

  Any help would be greatly appreciated.

  Of course, I'll be happy to help you, Tony!  Of course, I thought the vSphere 5.1 Setup Guide and was a little kludgy SSO, too.

  Assuming that you already had a MSSQL DB taken in charge and install SSO on another virtual Windows computer or server (SSO vCenter separation is a best practice), here is what I recommend to you present to SSO with a database of MSSQL remote (not a local MSSQLEXPRESS).

  Note: Your Windows SSO server does not belong to an AD domain at this point because you can combine SSO with AD al later through the Web Client of VirtualCenter, but if she is joined before running the installation of SSO, it will save you this step.

  While there may be other methods supported to install SSO, here are the basic steps that worked for me:

  • Locate the rsaIMSLiteMSSQLSetupTables.sql on the installation of vCenter 5.1 ISO ([drive]: \Single Sign On\DBScripts\SSOServer\schema\mssql\) and double-click it in the MSSQL Server, which will open in SQL Management Studio for editing running.
  • Change the paths of the three[C:\CHANGEME\...] in the SQL script with the file appropriate to your DBs & Trans newspapers railways.  In my case, I put the DB and indexes on D:\MSSQL\DB and on E:\MSSQL\LOGS newspapers
  • Run the script, and if all goes well, he will create a RSA in MSSQL database and successfully complete
  • [IMPORTANT] Right-click on the top level of SQL Server icon and select Properties, select Security and select Windows and SQL Server authentication mode (it is now a requirement of VMware as indicated on page 241 of vSphere 5.1 Setup Guide and) and click OK.
  • Restart MSSQL & Agent of Service for this setting to take effect.
  • Create a new SQL user account (i.e. sso) in MSSQL Server-> Security-> connections in the hierarchy of SQL Management Studio (make sure that the account does not require that you must change the password during its first connection) and give it to the server role SYSADMIN and dbo in the DB of RSA under mapping of users, click OK.
    • Note: You can avoid running the other SQL 'users' script mentioned in thevSphere 5.1 Installation Guide and for creating user SSO if you do this step and let the SSO installation program create the necessary users to the site.
  • Sign in to your soon SSO Windows server as administrator
    • Note: Ensure that your Windows server is properly would be hostname, IP would be, with before and would reverse DNS synchronization and clocks.  See the documentation for the other terms, if necessary.  You can join an AD domain if you want right now.
  • Start the program installation 5.1 SSO to the ISO 5.1 vCenter vCenter.
  • Create a main node for SSO (assuming this is your first), click Next.
  • Select to create the head for a new Single Sign-On installation vCenter node (which you can later), click Next.
  • Enter a master password that you want to use for SINGLE sign-on, click Next.
  • Select use an existing supported database, click Next
    • Note: Because SSO uses JDBC, there is no need to create an ODBC System DSN for SSO.
  • Enter RSAin the database name field, enter your MSSQL Server's FULL domain name in the field name of host or IP address and, finally, enter sso (from my example above) the database username and the password you created, click Next.
    • Note: nothing else on this page must be changed
  • Fill in the name of the SSO (not the IP address!) server FQDN, click Next.
  • Keep the box using network service account, click Next
    • Note: Given that I had really no specific guidance on the use of a service with SSO account, I just went with the default for now.  Perhaps in the future I will use a service account, but given the SSO is somehow independent AD I thought to go with a choice course and do not a service account AD which can be revoked if SSO is seconded of this announcement in the future.
  • Select your preferred installation folder, click Next.
  • Keep the port by default, click Next.
  • Click on install!

  SSO should install correctly and to create user accounts appropriate SQL called RSA_USER & RSA_DBA.

  • Disable or remove the sso SQL Admin account you created as it is no longer necessary once the SSO is installed.

  Then, to install the Service to vCenter inventory where you want as well as the vCenter Server and Web Client (i.e. separate VMs)

  Tip: You can only connect to vCenter 5.1 by using a local administrator (Windows) via vSphere Client 5.1 account.  To establish the rights vCenter to administrator in a Windows/AD user account (assuming that SSO was associated by AD), first open a session in vCenter (via vSphere Client 5.1) using admin as username and the SSO master password , you created during the installation of SSO.  Which will take you in and you can make adjustments if necessary permission.

  Before that I'm totally flamed for what others might offer as a way of more refined for SSO rose, I realize VMware offers a few different implementation approaches and perhaps best practices will emerge in the coming months.  My intention was to share my success with Tony in SSO getting online and I hope this helps other people faced with this new service of vCenter.

  Please do not hesitate to comment on everything that you feel could be improved with these general installation steps or let me know how it worked for you.

  -Matt

• PeopleSoft crm 9.1 Installation Guide

  I want to install the copy of DEMONSTRATION if CRM 9.1 PT 8.51.15 on SQL SERVER 2005 on Windows 2003 32-bit.
  
  
  I want to know what executable file should be copied to edeleivery. I can see various link.
  
  I also need to list of MP, required Bundle with the Installation of the DEMO.
  
  
  I'm looking for peoplesoft crm 9.1 Setup Guide.

  It's in the same place where u download the application delivery CRM software.

  The name will be similar to the below.

  PeopleSoft Enterprise Customer Relationship Management 9.1 Installation additional information - revision 2

  Thank you
  Jean-Marc

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• Oracle 10 g 2 - issue of needed packages quick installation guide

  Hope someone could help me please:
  
  In the quick setup guide, it lists those pacakges required for Oracle 10 g on Solaris x 86 2:
  
  SUNWarc
  SUNWbtool
  SUNWhea
  SUNWlibm
  SUNWlibms
  SUNWsprot
  SUNWtoo
  SUNWi1of
  SUNWi1cs
  SUNWi15cs
  SUNWxwfnt
  
  but then, the code example to check the existing packages says:
  
  # pkginfo-i SUNWarc SUNWbtool SUNWhea SUNWlibm------SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWsprox.
  SUNWi1cs SUNWi15cs SUNWxwfnt
  
  Is there a reason that SUNWsprox appears in the code example, but not in the list above?
  
  Just curious!
  
  Thanks buckets
  DTXCF

  It looks like a typing mistake. To be fair, installation guide he says "to determine if the necessary packages are installed, enter a command + similar to the next" (my italics!). For Solaris 10, I think you can skip the SUNWspro check * x *. Told me that the library which was SUNWspro * x * Solaris 8 and 9 is now in SUNWspro * t * to Solaris 10. Check with Sun.